1 <?xml version="1.0" encoding="utf-8"?>
2 <section id="GuideReferenceLIRC">
3 <title id="titleGuideReferenceLIRC">Infra-red controller</title>
4 <para>Recent Linux kernels have in-built support for ir devices, making lirc support redundant.</para>
5 <para>If you wish to use lirc with Geeqie, the lirc libraries must be installed. If you are compiling from sources, lirc functionality will be available if the library dependencies are met.</para>
6 <para>If you are using a pre-compiled distribution, availability depends on the package maintainer.</para>
9 <ulink url="https://www.lirc.org">Linux Infrared Remote Control</ulink>
10 has detailed information on this subject.
13 You will need to create a configuration file for the controller you will use. This file must be installed at the location specified in
14 <link linkend="GuideReferenceConfig" endterm="titleGuideReferenceConfig" />
18 Here is an excerpt from an .lircrc file:
29 <para>The commands Geeqie will respond to are:</para>
31 <tgroup cols="2" rowsep="1" colsep="1">
32 <thead rowsep="1" colsep="1">
34 <entry>Command</entry>
35 <entry>Mapped to</entry>
38 <tbody rowsep="1" colsep="1">
40 <entry>DOWN [int]</entry>
41 <entry>Pan down by the specified amount. Default=1</entry>
45 <entry>Exit Geeqie</entry>
49 <entry>Jump to first image</entry>
53 <entry>Show image overlay (full screen only)</entry>
57 <entry>Jump to last image</entry>
60 <entry>LEFT [int]</entry>
61 <entry>Pan left by the specified amount. Default=1</entry>
65 <entry>Go to next image</entry>
69 <entry>Pause/unpause slideshow</entry>
73 <entry>Go to previous image</entry>
76 <entry>RIGHT [int]</entry>
77 <entry>Pan right by the specified amount. Default=1</entry>
80 <entry>ROTATE_90 ]</entry>
81 <entry>Rotate image 90 degrees clockwise. .</entry>
84 <entry>ROTATE_90_CC</entry>
85 <entry>Rotate image 90 degrees counter-clockwise..</entry>
88 <entry>SET_INV_ZOOM [int]</entry>
89 <entry>Set Zoom level to 1:N. Default=1x</entry>
92 <entry>SET_ZOOM [int]</entry>
93 <entry>Set Zoom level to N:1. Default=1x</entry>
96 <entry>UP [int]</entry>
97 <entry>Pan up by the specified amount. Default=1</entry>
100 <entry>ZOOM_IN [int]</entry>
101 <entry>Zoom in. Value specifies the amount of zoom.</entry>
104 <entry>ZOOM_MAX ]</entry>
105 <entry>Zoom to fit image to window</entry>
108 <entry>ZOOM_OUT [int]</entry>
109 <entry>Zoom out. Value specifies the amount of zoom.</entry>