-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>General Options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;8415300">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_options.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>General - Options Explained</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_2_image.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>10.1 General Options</H1>
-<P>This section describes the options presented under the General Tab
-of the preferences dialog.</P>
-<P><BR><BR>
-</P>
-<P><U>Startup</U></P>
-<P STYLE="margin-left: 0.79in"><B>Change to folder</B>: Enabling this
-will cause Geeqie to initially open to the specified folder.</P>
-<P STYLE="margin-left: 0.79in"><B>Use Current</B>: Activate this
-button to change the setting to the current folder.</P>
-<DL>
- <DD STYLE="margin-left: 0in; margin-bottom: 0.2in"><BR><BR>
- </DD></DL>
-<P>
-<U>Thumbnails</U></P>
-<DL>
- <DL>
- <DD STYLE="margin-bottom: 0.2in; text-decoration: none"><B>Size</B>:
- Selects the size of the thumbnails displayed throughout Geeqie,
- dimensions are width by height in pixels.</DD><DD STYLE="margin-bottom: 0.2in; text-decoration: none">
- <B>Quality</B>: Selects the method to use when scaling an image
- down for thumbnails.</DD></DL>
-</DL>
-<P STYLE="margin-left: 1.58in">
-<B>Nearest</B>: Fastest scaler, but results in poor thumbnail
-quality.<BR><B>Tiles</B>: Thumbnail results are very close to
-bilinear, with better speed.<BR><B>Bilinear</B>: High quality
-results, moderately fast.<BR><B>Hyper</B>: Slowest scaler, sometimes
-gives better results than bilinear.</P>
-<DL>
- <DL>
- <DD STYLE="margin-bottom: 0.2in"><B>Cache thumbnails</B>: Enable
- this to save thumbnails to disk, subsequent requests for a
- thumbnail will be faster. Thumbnails are cached into
- ($HOME)/.geeqie/thumbnails. Refer to <A HREF="11_3_thumbnails.html">11.3
- thumbnails</A> for details.</DD><DD STYLE="margin-bottom: 0.2in">
- <B>Use shared thumbnail cache:</B> This will use a thumbnail
- caching method that is compatible with applications that use the
- standard thumbnail specification. When this option is enabled
- thumbnails will be stored in ($HOME)/.thumbnails</DD><DD STYLE="margin-bottom: 0.2in">
- <B>Cache thumbnails into .thumbnails</B>: When enabled, Geeqie
- attempts to store cached thumbnails closer to the source image.
- This way multiple users can benefit from a single cache, thereby
- reducing wasted disk space. The resulting location is the source
- image's folder, in a sub folder with the name <B>.thumbnails</B>.
- When the image source folder cannot be written, Geeqie falls back
- to saving the thumbnail in the user's home folder.</DD><DD STYLE="margin-bottom: 0.2in; text-decoration: none">
- <B>Use xvpics thumbnails when found</B>: xvpics is a common
- thumbnail caching format used by several applications. Thumbnails
- are stored locally to the source image in a sub folder with the
- name <B>.xvpics</B>. Enabling this option will allow Geeqie to read
- thumbnails saved in the xvpics format.</DD><DL>
- <DL>
- <DD STYLE="margin-bottom: 0.2in; text-decoration: none">
- <I>Note:</I> Support for xvpics is read only, Geeqie can not
- generate thumbnails in this format.</DD></DL>
- </DL>
- </DL>
-</DL>
-<P>
-<BR><BR>
-</P>
-<P><U>Slide show</U></P>
-<DL>
- <DL>
- <DD STYLE="margin-bottom: 0.2in; text-decoration: none"><B>Delay
- between image change</B>: Specifies the delay between images for
- slide shows, in seconds.</DD><DD STYLE="margin-bottom: 0.2in; text-decoration: none">
- <B>Random</B>: When enabled, slide show images will appear in
- random order.</DD><DL>
- <DL>
- <DD STYLE="margin-bottom: 0.2in; text-decoration: none">
- <I>Note:</I> Random images are displayed such that each image
- appears once per cycle of all images. When the slide show repeat
- option is enabled, the image order is randomized after completing
- each cycle.</DD></DL>
- </DL>
- <DD STYLE="margin-bottom: 0.2in; text-decoration: none">
- <B>Repeat</B>: When enabled, slide shows will continue at the
- beginning after the last image is displayed.</DD></DL>
- <DD STYLE="margin-left: 0in; margin-bottom: 0.2in; text-decoration: none">
- <BR><BR>
- </DD></DL>
-<P>
-<BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_options.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_2_image.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>General Options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;8415300" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-general-11 {margin-bottom: 0in}
+ dd.gq-general-10 {margin-left: 0in; margin-bottom: 0.2in; text-decoration: none}
+ dd.gq-general-9 {margin-bottom: 0.2in}
+ p.gq-general-8 {margin-left: 1.58in}
+ dd.gq-general-7 {margin-bottom: 0.2in; text-decoration: none}
+ dd.gq-general-6 {margin-left: 0in; margin-bottom: 0.2in}
+ p.gq-general-5 {margin-left: 0.79in}
+ div.gq-general-4 {text-align: center}
+ table.gq-general-3 {page-break-before: always}
+ p.gq-general-2 {text-align: right}
+ p.gq-general-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-general-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-general-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_options.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-general-1">General - Options Explained</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-general-2"><a href="10_2_image.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>10.1 General Options</h1>
+
+ <p>This section describes the options presented under the General Tab of the preferences dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Startup</u>
+ </p>
+
+ <p class="gq-general-5"><b>Change to folder</b>: Enabling this will cause Geeqie to initially open to the specified folder.</p>
+
+ <p class="gq-general-5"><b>Use Current</b>: Activate this button to change the setting to the current folder.</p>
+
+ <dl>
+ <dd class="gq-general-6"><br />
+ <br />
+ </dd>
+ </dl>
+
+ <p><u>Thumbnails</u>
+ </p>
+
+ <dl>
+ <dd>
+ <dl>
+ <dd class="gq-general-7"><b>Size</b>: Selects the size of the thumbnails displayed throughout Geeqie, dimensions are width by height in pixels.</dd>
+
+ <dd class="gq-general-7"><b>Quality</b>: Selects the method to use when scaling an image down for thumbnails.</dd>
+ </dl>
+ </dd>
+ </dl>
+
+ <p class="gq-general-8"><b>Nearest</b>: Fastest scaler, but results in poor thumbnail quality.<br />
+ <b>Tiles</b>: Thumbnail results are very close to bilinear, with better speed.<br />
+ <b>Bilinear</b>: High quality results, moderately fast.<br />
+ <b>Hyper</b>: Slowest scaler, sometimes gives better results than bilinear.</p>
+
+ <dl>
+ <dd>
+ <dl>
+ <dd class="gq-general-9"><b>Cache thumbnails</b>: Enable this to save thumbnails to disk, subsequent requests for a thumbnail will be faster. Thumbnails are cached into ($HOME)/.geeqie/thumbnails. Refer to <a href="11_3_thumbnails.html">11.3 thumbnails</a> for details.</dd>
+
+ <dd class="gq-general-9"><b>Use shared thumbnail cache:</b> This will use a thumbnail caching method that is compatible with applications that use the standard thumbnail specification. When this option is enabled thumbnails will be stored in ($HOME)/.thumbnails</dd>
+
+ <dd class="gq-general-9"><b>Cache thumbnails into .thumbnails</b>: When enabled, Geeqie attempts to store cached thumbnails closer to the source image. This way multiple users can benefit from a single cache, thereby reducing wasted disk space. The resulting location is the source image's folder, in a sub folder with the name <b>.thumbnails</b>. When the image source folder cannot be written, Geeqie falls back to saving the thumbnail in the user's home folder.</dd>
+
+ <dd class="gq-general-7"><b>Use xvpics thumbnails when found</b>: xvpics is a common thumbnail caching format used by several applications. Thumbnails are stored locally to the source image in a sub folder with the name <b>.xvpics</b>. Enabling this option will allow Geeqie to read thumbnails saved in the xvpics format.</dd>
+
+ <dd>
+ <dl>
+ <dd>
+ <dl>
+ <dd class="gq-general-7"><i>Note:</i> Support for xvpics is read only, Geeqie can not generate thumbnails in this format.</dd>
+ </dl>
+ </dd>
+ </dl>
+ </dd>
+ </dl>
+ </dd>
+ </dl>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Slide show</u>
+ </p>
+
+ <dl>
+ <dd>
+ <dl>
+ <dd class="gq-general-7"><b>Delay between image change</b>: Specifies the delay between images for slide shows, in seconds.</dd>
+
+ <dd class="gq-general-7"><b>Random</b>: When enabled, slide show images will appear in random order.</dd>
+
+ <dd>
+ <dl>
+ <dd>
+ <dl>
+ <dd class="gq-general-7"><i>Note:</i> Random images are displayed such that each image appears once per cycle of all images. When the slide show repeat option is enabled, the image order is randomized after completing each cycle.</dd>
+ </dl>
+ </dd>
+ </dl>
+ </dd>
+
+ <dd class="gq-general-7"><b>Repeat</b>: When enabled, slide shows will continue at the beginning after the last image is displayed.</dd>
+ </dl>
+ </dd>
+
+ <dd class="gq-general-10"><br />
+ <br />
+ </dd>
+ </dl>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-general-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_options.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-general-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-general-2"><a href="10_2_image.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-general-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-general-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-general-11"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Image Options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;8422000">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_1_general.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Image – Options Explaned</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_3_window.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>10.2 Image Options</H1>
-<P STYLE="font-style: normal; text-decoration: none">This section
-describes the options presented under the Image Tab of the
-preferences dialog.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-style: normal; text-decoration: none"><U>Zoom</U></P>
-<P STYLE="margin-left: 0.79in; font-style: normal; text-decoration: none">
-<B>Quality</B>: Selects the method used to scale the size of an
-image.</P>
-<P STYLE="margin-left: 1.58in; font-style: normal; text-decoration: none">
-<B>Nearest</B>: Fastest scaler, but results in poor image
-quality.<BR><B>Tiles</B>: Results are somewhat close to bilinear,
-with better speed.<BR><B>Bilinear</B>: High quality results,
-moderately fast.<BR><B>Hyper</B>: Slowest scaler, sometimes gives
-better results than bilinear.</P>
-<P STYLE="margin-left: 0.79in; font-style: normal; text-decoration: none">
-<B>Two pass zooming</B>: Enables Geeqie to first display a scaled
-image using the nearest zoom quality. After image decoding is
-complete, the image is scaled again using the selected “Zoom
-(scaling)” method. This allows faster display of an image as it
-is decoded from the source file.</P>
-<P STYLE="margin-left: 0.79in; font-style: normal; text-decoration: none">
-<B>Allow enlargement of image for zoom to fit</B>: Enable this to
-allow Geeqie to increase the image size for images that are smaller
-than the current view area when the zoom is set to “Fit to
-Window”.</P>
-<P STYLE="margin-left: 0.79in; font-style: normal; text-decoration: none">
-<B>Zoom increment</B>: Adjusts the step size when zooming in or out
-on an image. This value corresponds to the percentage of the original
-image.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-style: normal; text-decoration: none"><U>Zoom control</U></P>
-<P STYLE="margin-left: 0.79in"><SPAN STYLE="text-decoration: none"><B>When
-new image is selected</B>: </SPAN>This controls the behavior of the
-zoom setting when changing the displayed image.</P>
-<P STYLE="margin-left: 1.58in"><B>Zoom to original size</B>: The new
-image is set to it's original size.<BR><B>Fit image to window</B>:
-The new image's zoom is changed so that the image will fit within the
-current view area.<BR><B>Leave zoom at previous setting</B>: The zoom
-setting is unchanged, the new image will be scaled the same as the
-previous image.</P>
-<P><BR><BR>
-</P>
-<P><U>Appearance</U></P>
-<P STYLE="margin-left: 0.79in"><B>Black background</B>: Enable this
-to draw the image background (the area around the image) in black.</P>
-<P><BR><BR>
-</P>
-<P><U>Convenience</U></P>
-<P STYLE="margin-left: 0.79in"><B>Refresh on file change</B>: Geeqie
-will monitor currently active images and folders for changes in their
-modification time, and update the display if it changes.</P>
-<P STYLE="margin-left: 1.58in"><I>Note:</I> Disable this if the
-system will not go into sleep mode due to occasional disk activity
-from the time check, or if Geeqie updates too often for folders with
-continuously changing content.</P>
-<P STYLE="margin-left: 0.79in; text-decoration: none"><B>Preload next
-image</B>: Enabling this option will cause Geeqie to read the next
-logical image from disk when idle, it will also retain the previously
-viewed image in memory. By reading the nearest images into memory,
-time to display the next image is reduced.</P>
-<DL>
- <DL>
- <DL>
- <DL>
- <DD STYLE="margin-bottom: 0.2in"><SPAN STYLE="text-decoration: none"><I>Note:</I>
- This option will increase Geeqie memory requirements, and may
- cause performance issues with very large images.</SPAN> If the
- use of Geeqie results in the system noticeably swapping memory to
- disk, try disabling this feature.</DD></DL>
- </DL>
- </DL>
-</DL>
-<P STYLE="margin-left: 0.79in; margin-bottom: 0.2in; text-decoration: none">
-<B>Auto rotate image using EXIF information</B>: Auto rotates images
-based on data stored in images that include EXIF data.</P>
-<P STYLE="margin-bottom: 0.2in"><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_1_general.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_3_window.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Image Options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;8422000" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-image-15 {margin-bottom: 0in}
+ p.gq-image-14 {margin-bottom: 0.2in}
+ p.gq-image-13 {margin-left: 0.79in; margin-bottom: 0.2in; text-decoration: none}
+ dd.gq-image-12 {margin-bottom: 0.2in}
+ p.gq-image-11 {margin-left: 0.79in; text-decoration: none}
+ p.gq-image-10 {margin-left: 1.58in}
+ p.gq-image-9 {margin-left: 0.79in}
+ span.gq-image-8 {text-decoration: none}
+ p.gq-image-7 {margin-left: 1.58in; font-style: normal; text-decoration: none}
+ p.gq-image-6 {margin-left: 0.79in; font-style: normal; text-decoration: none}
+ p.gq-image-5 {font-style: normal; text-decoration: none}
+ div.gq-image-4 {text-align: center}
+ table.gq-image-3 {page-break-before: always}
+ p.gq-image-2 {text-align: right}
+ p.gq-image-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-image-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-image-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_1_general.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-1">Image – Options Explaned</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-2"><a href="10_3_window.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>10.2 Image Options</h1>
+
+ <p class="gq-image-5">This section describes the options presented under the Image Tab of the preferences dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-image-5"><u>Zoom</u>
+ </p>
+
+ <p class="gq-image-6"><b>Quality</b>: Selects the method used to scale the size of an image.</p>
+
+ <p class="gq-image-7"><b>Nearest</b>: Fastest scaler, but results in poor image quality.<br />
+ <b>Tiles</b>: Results are somewhat close to bilinear, with better speed.<br />
+ <b>Bilinear</b>: High quality results, moderately fast.<br />
+ <b>Hyper</b>: Slowest scaler, sometimes gives better results than bilinear.</p>
+
+ <p class="gq-image-6"><b>Two pass zooming</b>: Enables Geeqie to first display a scaled image using the nearest zoom quality. After image decoding is complete, the image is scaled again using the selected “Zoom (scaling)” method. This allows faster display of an image as it is decoded from the source file.</p>
+
+ <p class="gq-image-6"><b>Allow enlargement of image for zoom to fit</b>: Enable this to allow Geeqie to increase the image size for images that are smaller than the current view area when the zoom is set to “Fit to Window”.</p>
+
+ <p class="gq-image-6"><b>Zoom increment</b>: Adjusts the step size when zooming in or out on an image. This value corresponds to the percentage of the original image.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-image-5"><u>Zoom control</u>
+ </p>
+
+ <p class="gq-image-9"><span class="gq-image-8"><b>When new image is selected</b>:</span> This controls the behavior of the zoom setting when changing the displayed image.</p>
+
+ <p class="gq-image-10"><b>Zoom to original size</b>: The new image is set to it's original size.<br />
+ <b>Fit image to window</b>: The new image's zoom is changed so that the image will fit within the current view area.<br />
+ <b>Leave zoom at previous setting</b>: The zoom setting is unchanged, the new image will be scaled the same as the previous image.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Appearance</u>
+ </p>
+
+ <p class="gq-image-9"><b>Black background</b>: Enable this to draw the image background (the area around the image) in black.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Convenience</u>
+ </p>
+
+ <p class="gq-image-9"><b>Refresh on file change</b>: Geeqie will monitor currently active images and folders for changes in their modification time, and update the display if it changes.</p>
+
+ <p class="gq-image-10"><i>Note:</i> Disable this if the system will not go into sleep mode due to occasional disk activity from the time check, or if Geeqie updates too often for folders with continuously changing content.</p>
+
+ <p class="gq-image-11"><b>Preload next image</b>: Enabling this option will cause Geeqie to read the next logical image from disk when idle, it will also retain the previously viewed image in memory. By reading the nearest images into memory, time to display the next image is reduced.</p>
+
+ <dl>
+ <dd>
+ <dl>
+ <dd>
+ <dl>
+ <dd>
+ <dl>
+ <dd class="gq-image-12"><span class="gq-image-8"><i>Note:</i> This option will increase Geeqie memory requirements, and may cause performance issues with very large images.</span> If the use of Geeqie results in the system noticeably swapping memory to disk, try disabling this feature.</dd>
+ </dl>
+ </dd>
+ </dl>
+ </dd>
+ </dl>
+ </dd>
+ </dl>
+
+ <p class="gq-image-13"><b>Auto rotate image using EXIF information</b>: Auto rotates images based on data stored in images that include EXIF data.</p>
+
+ <p class="gq-image-14"><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-image-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_1_general.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-2"><a href="10_3_window.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-image-15"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Window Options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;8423500">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_2_image.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Window – Options Explained</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_4_filtering.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>10.3 Window Options</H1>
-<P STYLE="font-style: normal; text-decoration: none">This section
-describes the options presented under the Windows Tab of the
-preferences dialog.</P>
-<P><BR><BR>
-</P>
-<P><U>State</U></P>
-<P STYLE="margin-left: 0.79in"><B>Remember window positions</B>: This
-will maintain the main window size and position between Geeqie
-sessions.</P>
-<P STYLE="margin-left: 0.79in"><B>Remember tool state</B>: This will
-maintain the tool window state between Geeqie sessions.</P>
-<P><BR><BR>
-</P>
-<P><U>Size</U></P>
-<P STYLE="margin-left: 0.79in"><B>Fit window to image when tools are
-hidden/floating</B>: The main window will be resized to accommodate
-each image's size and proportions when the image pane is the only one
-visible within the window.</P>
-<P STYLE="margin-left: 0.79in"><B>Limit size when auto-sizing window</B>:
-This will restrict the maximum size a window can grow to
-automatically fit an image. The value represents the percentage of
-the desktop size in width and height.</P>
-<P><BR><BR>
-</P>
-<P><U>Window Layout</U></P>
-<P STYLE="margin-left: 0.79in">The Geeqie main window consists of
-three main panes, their position and order can be changed here. The
-first four selections represent the basic layout of the main window.
-The numbers within each selection represent the order of the pane
-content. The order of the content can be changed by dragging the
-Tools, Files, or Image with the mouse to the desired location within
-the list.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_2_image.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_4_filtering.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Window Options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;8423500" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-window-7 {margin-bottom: 0in}
+ p.gq-window-6 {margin-left: 0.79in}
+ p.gq-window-5 {font-style: normal; text-decoration: none}
+ div.gq-window-4 {text-align: center}
+ table.gq-window-3 {page-break-before: always}
+ p.gq-window-2 {text-align: right}
+ p.gq-window-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-window-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-window-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_2_image.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-window-1">Window – Options Explained</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-window-2"><a href="10_4_filtering.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>10.3 Window Options</h1>
+
+ <p class="gq-window-5">This section describes the options presented under the Windows Tab of the preferences dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>State</u>
+ </p>
+
+ <p class="gq-window-6"><b>Remember window positions</b>: This will maintain the main window size and position between Geeqie sessions.</p>
+
+ <p class="gq-window-6"><b>Remember tool state</b>: This will maintain the tool window state between Geeqie sessions.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Size</u>
+ </p>
+
+ <p class="gq-window-6"><b>Fit window to image when tools are hidden/floating</b>: The main window will be resized to accommodate each image's size and proportions when the image pane is the only one visible within the window.</p>
+
+ <p class="gq-window-6"><b>Limit size when auto-sizing window</b>: This will restrict the maximum size a window can grow to automatically fit an image. The value represents the percentage of the desktop size in width and height.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Window Layout</u>
+ </p>
+
+ <p class="gq-window-6">The Geeqie main window consists of three main panes, their position and order can be changed here. The first four selections represent the basic layout of the main window. The numbers within each selection represent the order of the pane content. The order of the content can be changed by dragging the Tools, Files, or Image with the mouse to the desired location within the list.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-window-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_2_image.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-window-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-window-2"><a href="10_4_filtering.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-window-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-window-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-window-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Filtering Options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;8424900">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_3_window.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Filtering – Options Explained</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_5_editor_commands.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>10.4 Filtering Options</H1>
-<P>This section describes the options presented under the Filtering
-Tab of the preferences dialog.</P>
-<P><BR><BR>
-</P>
-<P><U>Filters</U></P>
-<P STYLE="margin-left: 0.79in"><B>Show entries that begin with a dot</B>:
-Enables the display of hidden files and folders, also known as dot
-files.</P>
-<P STYLE="margin-left: 0.79in"><B>Case sensitive sort</B>: Files and
-folders are sorted such that upper case letters occur before lower
-case letters.</P>
-<P STYLE="margin-left: 1.58in">Enabled result: A, B, C, a, b,
-c<BR>Disabled result: A, a, B, b, C, c</P>
-<P STYLE="margin-left: 0.79in"><B>Disable file filtering</B>: Enable
-this to allow Geeqie to list all files, even those that do not
-contain images.</P>
-<P><BR><BR>
-</P>
-<P><U>File types</U></P>
-<P STYLE="margin-left: 0.79in">This list contains the image formats
-that are understood by Geeqie. To disable a specific file type from
-being displayed, uncheck it's corresponding checkbox. Filters can be
-edited by first selecting the line containing the item to be changed,
-then clicking the filter or description field, making any changes,
-then pressing enter; press escape to cancel an active edit. The
-format for the filter field is a semicolon (;) seperated list of
-extensions, extensions must include the period (.).</P>
-<P STYLE="margin-left: 1.58in"><I>Note:</I> Unlike all other options
-in the dialog, filter list changes are applied immediately.</P>
-<P STYLE="margin-left: 0.79in"><B>Add</B> button: Adds a new blank
-line to the filter list, change the parameters to match the desired
-file type.</P>
-<P STYLE="margin-left: 0.79in"><B>Remove</B> button: Removes the
-selected line from the filter list.</P>
-<P STYLE="margin-left: 0.79in"><B>Defaults</B> button: Resets the
-filter list to the default values, discarding any customizations made
-by the user.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_3_window.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_5_editor_commands.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Filtering Options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;8424900" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-filtering-7 {margin-bottom: 0in}
+ p.gq-filtering-6 {margin-left: 1.58in}
+ p.gq-filtering-5 {margin-left: 0.79in}
+ div.gq-filtering-4 {text-align: center}
+ table.gq-filtering-3 {page-break-before: always}
+ p.gq-filtering-2 {text-align: right}
+ p.gq-filtering-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-filtering-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-filtering-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_3_window.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-filtering-1">Filtering – Options Explained</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-filtering-2"><a href="10_5_editor_commands.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>10.4 Filtering Options</h1>
+
+ <p>This section describes the options presented under the Filtering Tab of the preferences dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Filters</u>
+ </p>
+
+ <p class="gq-filtering-5"><b>Show entries that begin with a dot</b>: Enables the display of hidden files and folders, also known as dot files.</p>
+
+ <p class="gq-filtering-5"><b>Case sensitive sort</b>: Files and folders are sorted such that upper case letters occur before lower case letters.</p>
+
+ <p class="gq-filtering-6">Enabled result: A, B, C, a, b, c<br />
+ Disabled result: A, a, B, b, C, c</p>
+
+ <p class="gq-filtering-5"><b>Disable file filtering</b>: Enable this to allow Geeqie to list all files, even those that do not contain images.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>File types</u>
+ </p>
+
+ <p class="gq-filtering-5">This list contains the image formats that are understood by Geeqie. To disable a specific file type from being displayed, uncheck it's corresponding checkbox. Filters can be edited by first selecting the line containing the item to be changed, then clicking the filter or description field, making any changes, then pressing enter; press escape to cancel an active edit. The format for the filter field is a semicolon (;) seperated list of extensions, extensions must include the period (.).</p>
+
+ <p class="gq-filtering-6"><i>Note:</i> Unlike all other options in the dialog, filter list changes are applied immediately.</p>
+
+ <p class="gq-filtering-5"><b>Add</b> button: Adds a new blank line to the filter list, change the parameters to match the desired file type.</p>
+
+ <p class="gq-filtering-5"><b>Remove</b> button: Removes the selected line from the filter list.</p>
+
+ <p class="gq-filtering-5"><b>Defaults</b> button: Resets the filter list to the default values, discarding any customizations made by the user.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-filtering-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_3_window.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-filtering-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-filtering-2"><a href="10_5_editor_commands.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-filtering-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-filtering-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-filtering-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Editor Options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050613;17101000">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_4_filtering.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Editors – Options Explained</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_6_advanced.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>10.5 Editor Commands</H1>
-<P>This section describes the options presented under the Editors Tab
-of the preferences dialog.</P>
-<P>Geeqie includes ten entries that can be used for executing other
-applications or shell commands with the selected image. These
-commands are accessible by menu and keyboard shortcuts. The keyboard
-shortcuts use [Control] + [1] through [Control] + [0], which
-correspond to lines one through ten in the preferences dialog.</P>
-<P><BR><BR>
-</P>
-<P><B>Menu name</B>: This field is used to represent the command in
-the menus of Geeqie, it is intended to describe the application or
-function that results from executing the command in the <U>Command
-Line</U> field.</P>
-<P><BR><BR>
-</P>
-<P><B>Command Line</B>: This field is the command to execute. Several
-macros are available to position image file names within the command.
-If no macro is specified, the behavior will be to append the
-filenames onto the end of the command (the result will be the same as
-“<I>command %f</I>”).</P>
-<DL>
- <DL>
- <DD>
- <TABLE WIDTH=80% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=51*>
- <COL WIDTH=205*>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P ALIGN=CENTER><B>Macro</B></P>
- </TD>
- <TD WIDTH=80%>
- <P><B>Description</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P ALIGN=CENTER>%f</P>
- </TD>
- <TD WIDTH=80%>
- <P>Inserts list of selected files, may occur only once.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P ALIGN=CENTER>%p</P>
- </TD>
- <TD WIDTH=80%>
- <P>Command is executed once for each selected file, may occur
- multiple times.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P ALIGN=CENTER>%v</P>
- </TD>
- <TD WIDTH=80%>
- <P>Display the result of the command in an output window. Must
- occur as the first two characters, or immediately after the “%w”
- macro.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P ALIGN=CENTER>%V</P>
- </TD>
- <TD WIDTH=80%>
- <P>Like %v above, but when used with %p, only displays output
- window when multiple files are selected; The output of a single
- file is suppressed.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P ALIGN=CENTER>%w</P>
- </TD>
- <TD WIDTH=80%>
- <P>Prevent full screen from deactivating when command is
- executed. Must occur as the first two characters.</P>
- </TD>
- </TR>
- </TABLE>
- </DL>
-</DL>
-<P><BR><BR>
-</P>
-<P><B>Help</B> button: Displays reference list of the supported
-command macros.</P>
-<P><B>Defaults</B> button: Resets all commands to the default
-settings, discarding any customizations made by the user.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_4_filtering.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_6_advanced.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Editor Options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050613;17101000" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-editor-commands-7 {margin-bottom: 0in}
+ p.gq-editor-commands-6 {font-weight: bold}
+ p.gq-editor-commands-5 {font-weight: bold; text-align: center}
+ div.gq-editor-commands-4 {text-align: center}
+ table.gq-editor-commands-3 {page-break-before: always}
+ p.gq-editor-commands-2 {text-align: right}
+ p.gq-editor-commands-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-editor-commands-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-editor-commands-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_4_filtering.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-editor-commands-1">Editors – Options Explained</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-editor-commands-2"><a href="10_6_advanced.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>10.5 Editor Commands</h1>
+
+ <p>This section describes the options presented under the Editors Tab of the preferences dialog.</p>
+
+ <p>Geeqie includes ten entries that can be used for executing other applications or shell commands with the selected image. These commands are accessible by menu and keyboard shortcuts. The keyboard shortcuts use [Control] + [1] through [Control] + [0], which correspond to lines one through ten in the preferences dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><b>Menu name</b>: This field is used to represent the command in the menus of Geeqie, it is intended to describe the application or function that results from executing the command in the <u>Command Line</u> field.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><b>Command Line</b>: This field is the command to execute. Several macros are available to position image file names within the command. If no macro is specified, the behavior will be to append the filenames onto the end of the command (the result will be the same as “<i>command %f</i>”).</p>
+
+ <dl>
+ <dd>
+ <dl>
+ <dd>
+ <table width="80%" border="0" cellpadding="4" cellspacing="0">
+ <col width="51*" />
+ <col width="205*" />
+
+ <tr valign="top">
+ <td width="20%">
+ <p class="gq-editor-commands-5">Macro</p>
+ </td>
+
+ <td width="80%">
+ <p class="gq-editor-commands-6">Description</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p class="gq-editor-commands-1">%f</p>
+ </td>
+
+ <td width="80%">
+ <p>Inserts list of selected files, may occur only once.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p class="gq-editor-commands-1">%p</p>
+ </td>
+
+ <td width="80%">
+ <p>Command is executed once for each selected file, may occur multiple times.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p class="gq-editor-commands-1">%v</p>
+ </td>
+
+ <td width="80%">
+ <p>Display the result of the command in an output window. Must occur as the first two characters, or immediately after the “%w” macro.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p class="gq-editor-commands-1">%V</p>
+ </td>
+
+ <td width="80%">
+ <p>Like %v above, but when used with %p, only displays output window when multiple files are selected; The output of a single file is suppressed.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p class="gq-editor-commands-1">%w</p>
+ </td>
+
+ <td width="80%">
+ <p>Prevent full screen from deactivating when command is executed. Must occur as the first two characters.</p>
+ </td>
+ </tr>
+ </table>
+ </dd>
+ </dl>
+ </dd>
+ </dl>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><b>Help</b> button: Displays reference list of the supported command macros.</p>
+
+ <p><b>Defaults</b> button: Resets all commands to the default settings, discarding any customizations made by the user.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-editor-commands-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_4_filtering.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-editor-commands-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-editor-commands-2"><a href="10_6_advanced.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-editor-commands-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-editor-commands-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-editor-commands-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Advanced Options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050208;14303200">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_5_editor_commands.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Advanced – Options Explained</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_7_hidden.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>10.6 Advanced Options</H1>
-<P STYLE="font-style: normal; text-decoration: none">This section
-describes the options presented under the Advanced Tab of the
-preferences dialog.</P>
-<P><BR><BR>
-</P>
-<P><U>Full Screen</U></P>
-<P STYLE="margin-left: 0.79in"><B>Location</B>: Selects the location
-and position of the full screen window. 'Determined by window
-manager' will leave the window placement up to the window manager.
-'Active screen' places the window on the same screen as the Geeqie
-main window. 'Active monitor' does the same, but limits the full
-screen window size to the monitor containing the main window. The
-remaining choices are dependent on the multiple monitor
-configuration.</P>
-<P STYLE="margin-left: 0.79in"><B>Stay above other windows:</B>
-Enable this to have Geeqie ask the window manager to keep the full
-screen window above other windows. Note that the window manager may
-ignore the request. This option is not relevant when the full screen
-location is determined by the window manager.</P>
-<P STYLE="margin-left: 0.79in"><B>Smooth image flip</B>: This option
-delays the image change in full screen until the next image is
-entirely decoded into memory, the result is a smoother transition
-between images.</P>
-<P STYLE="margin-left: 0.79in"><B>Disable screen saver</B>: This
-option will execute <I>xscreensaver-command --deactivate</I> once per
-minute to avoid the screen saver from activating when Geeqie is
-displayed full screen.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-style: normal; font-weight: medium"><U>Delete</U></P>
-<P STYLE="margin-left: 0.79in; font-style: normal"><B>Confirm file
-delete</B>: Prompts for confirmation before deleting files.</P>
-<P STYLE="margin-left: 0.79in; font-style: normal"><B>Enable Delete
-key</B>: Disable this to disassociate the delete file function from
-the Delete key. This option does not effect the [Control] + D key
-sequence. May be useful in combination with “confirm file
-delete”, above, disabled so that accidentally hitting a single
-key will not result in deleted files.</P>
-<P STYLE="margin-left: 0.79in; font-style: normal"><B>Safe Delete</B>:
-Moves deleted files to a temporary folder, for easy retrieval of
-deleted files. Files in the temporary folder are retained until the
-maximum size is reached, at which point deleting additional files
-will result in the removal of the oldest files to reclaim the space
-needed for the new files.</P>
-<P STYLE="margin-left: 1.58in; font-style: normal"><I>Note:</I> Files
-moved to the Safe Delete folder are prefixed with a six digit number
-in the format:</P>
-<P STYLE="margin-left: 2.36in"><I>nnnnnn_FILENAME</I></P>
-<P STYLE="margin-left: 1.58in; font-style: normal">This is used by
-the delete feature to distinguish which files to remove first when
-clearing space for new files. The digit counter increments with each
-deleted file.</P>
-<P STYLE="margin-left: 0.79in; font-style: normal"><B>Folder</B>: The
-location of the folder used by the Safe Delete feature.</P>
-<P STYLE="margin-left: 0.79in"><B>Maximum size</B>: The size to use
-for the Safe Delete folder, in megabytes.</P>
-<P STYLE="margin-left: 0.79in"><B>Clear</B> button: Removes all files
-contained in the Safe Delete folder.</P>
-<P STYLE="margin-left: 0.79in"><B>View</B> button: Changes the Geeqie
-main window to display the contents of the Safe Delete folder.</P>
-<P><BR><BR>
-</P>
-<P><U>Behavior</U></P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Rectangular
-selection in icon view:</B> Enable this to change the selection
-method used when selecting multiple items in an icon view.</P>
-<P STYLE="margin-left: 0.79in"><B>Descend folders in tree view</B>:
-This will allow Geeqie to read sub folder content to determine if it
-should display expander indicators in the folder tree view.</P>
-<P STYLE="margin-left: 1.58in"><I>Note:</I> Disable this if Geeqie
-wakes up auto mounted network shares, or takes too long to initially
-display the folder view.</P>
-<P STYLE="margin-left: 0.79in"><B>In place renaming</B>: When
-renaming a single file, this will allow the rename entry to appear
-directly over the original filename.</P>
-<P><BR><BR>
-</P>
-<P><U>Navigation</U></P>
-<P STYLE="margin-left: 0.79in"><B>Progressive keyboard scrolling</B>:
-This will cause image panning speed to gradually accelerate when
-holding down the keyboard arrows.</P>
-<P STYLE="margin-left: 0.79in"><B>Mouse wheel scrolls image</B>: The
-default is for the mouse wheel to change the image, and to scroll the
-image when shift is used in combination with the wheel. Enabling this
-swaps the behavior so that operating the wheel will scroll the image,
-and holding down shift will change the image.</P>
-<P><BR><BR>
-</P>
-<P><U>Miscellaneous</U></P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Store keywords
-and comments local to source images:</B> When enabled, Geeqie
-attempts to store metadata such as keywords closer to the source
-image. The resulting location is the source image's folder, in a sub
-folder with the name "<B>.metadata"</B>. When the image
-source folder cannot be written, Geeqie falls back to saving the
-medata in "$HOME/.geeqie/metadata".</P>
-<P STYLE="margin-left: 0.79in"><B>Custom similarity threshold</B>:
-This setting is used by the compare method “similarity
-(custom)”, located in the Find Duplicates window.</P>
-<P STYLE="margin-left: 0.79in"><B>Offscreen cache size</B>: Geeqie
-only renders the visible portion of an image. To reduce rendering the
-same area frequently when panning an image, some memory is used to
-retain the recently rendered image data. This value controls the
-maximum amount of memory to use.</P>
-<P STYLE="margin-left: 1.58in"><I>Note:</I> This setting controls the
-amount of memory<SPAN STYLE="text-decoration: none"> for <U>each</U>
-image window.</SPAN></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_5_editor_commands.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_7_hidden.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Advanced Options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050208;14303200" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-advanced-14 {margin-bottom: 0in}
+ span.gq-advanced-13 {text-decoration: none}
+ p.gq-advanced-12 {margin-left: 1.58in}
+ p.gq-advanced-11 {margin-left: 0.79in; font-weight: medium}
+ p.gq-advanced-10 {font-style: italic; margin-left: 2.36in}
+ p.gq-advanced-9 {margin-left: 1.58in; font-style: normal}
+ p.gq-advanced-8 {margin-left: 0.79in; font-style: normal}
+ p.gq-advanced-7 {font-style: normal; font-weight: medium}
+ p.gq-advanced-6 {margin-left: 0.79in}
+ p.gq-advanced-5 {font-style: normal; text-decoration: none}
+ div.gq-advanced-4 {text-align: center}
+ table.gq-advanced-3 {page-break-before: always}
+ p.gq-advanced-2 {text-align: right}
+ p.gq-advanced-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-advanced-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-advanced-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_5_editor_commands.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-advanced-1">Advanced – Options Explained</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-advanced-2"><a href="10_7_hidden.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>10.6 Advanced Options</h1>
+
+ <p class="gq-advanced-5">This section describes the options presented under the Advanced Tab of the preferences dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Full Screen</u>
+ </p>
+
+ <p class="gq-advanced-6"><b>Location</b>: Selects the location and position of the full screen window. 'Determined by window manager' will leave the window placement up to the window manager. 'Active screen' places the window on the same screen as the Geeqie main window. 'Active monitor' does the same, but limits the full screen window size to the monitor containing the main window. The remaining choices are dependent on the multiple monitor configuration.</p>
+
+ <p class="gq-advanced-6"><b>Stay above other windows:</b> Enable this to have Geeqie ask the window manager to keep the full screen window above other windows. Note that the window manager may ignore the request. This option is not relevant when the full screen location is determined by the window manager.</p>
+
+ <p class="gq-advanced-6"><b>Smooth image flip</b>: This option delays the image change in full screen until the next image is entirely decoded into memory, the result is a smoother transition between images.</p>
+
+ <p class="gq-advanced-6"><b>Disable screen saver</b>: This option will execute <i>xscreensaver-command --deactivate</i> once per minute to avoid the screen saver from activating when Geeqie is displayed full screen.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-advanced-7"><u>Delete</u>
+ </p>
+
+ <p class="gq-advanced-8"><b>Confirm file delete</b>: Prompts for confirmation before deleting files.</p>
+
+ <p class="gq-advanced-8"><b>Enable Delete key</b>: Disable this to disassociate the delete file function from the Delete key. This option does not effect the [Control] + D key sequence. May be useful in combination with “confirm file delete”, above, disabled so that accidentally hitting a single key will not result in deleted files.</p>
+
+ <p class="gq-advanced-8"><b>Safe Delete</b>: Moves deleted files to a temporary folder, for easy retrieval of deleted files. Files in the temporary folder are retained until the maximum size is reached, at which point deleting additional files will result in the removal of the oldest files to reclaim the space needed for the new files.</p>
+
+ <p class="gq-advanced-9"><i>Note:</i> Files moved to the Safe Delete folder are prefixed with a six digit number in the format:</p>
+
+ <p class="gq-advanced-10">nnnnnn_FILENAME</p>
+
+ <p class="gq-advanced-9">This is used by the delete feature to distinguish which files to remove first when clearing space for new files. The digit counter increments with each deleted file.</p>
+
+ <p class="gq-advanced-8"><b>Folder</b>: The location of the folder used by the Safe Delete feature.</p>
+
+ <p class="gq-advanced-6"><b>Maximum size</b>: The size to use for the Safe Delete folder, in megabytes.</p>
+
+ <p class="gq-advanced-6"><b>Clear</b> button: Removes all files contained in the Safe Delete folder.</p>
+
+ <p class="gq-advanced-6"><b>View</b> button: Changes the Geeqie main window to display the contents of the Safe Delete folder.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Behavior</u>
+ </p>
+
+ <p class="gq-advanced-11"><b>Rectangular selection in icon view:</b> Enable this to change the selection method used when selecting multiple items in an icon view.</p>
+
+ <p class="gq-advanced-6"><b>Descend folders in tree view</b>: This will allow Geeqie to read sub folder content to determine if it should display expander indicators in the folder tree view.</p>
+
+ <p class="gq-advanced-12"><i>Note:</i> Disable this if Geeqie wakes up auto mounted network shares, or takes too long to initially display the folder view.</p>
+
+ <p class="gq-advanced-6"><b>In place renaming</b>: When renaming a single file, this will allow the rename entry to appear directly over the original filename.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Navigation</u>
+ </p>
+
+ <p class="gq-advanced-6"><b>Progressive keyboard scrolling</b>: This will cause image panning speed to gradually accelerate when holding down the keyboard arrows.</p>
+
+ <p class="gq-advanced-6"><b>Mouse wheel scrolls image</b>: The default is for the mouse wheel to change the image, and to scroll the image when shift is used in combination with the wheel. Enabling this swaps the behavior so that operating the wheel will scroll the image, and holding down shift will change the image.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Miscellaneous</u>
+ </p>
+
+ <p class="gq-advanced-11"><b>Store keywords and comments local to source images:</b> When enabled, Geeqie attempts to store metadata such as keywords closer to the source image. The resulting location is the source image's folder, in a sub folder with the name "<b>.metadata"</b>. When the image source folder cannot be written, Geeqie falls back to saving the medata in "$HOME/.geeqie/metadata".</p>
+
+ <p class="gq-advanced-6"><b>Custom similarity threshold</b>: This setting is used by the compare method “similarity (custom)”, located in the Find Duplicates window.</p>
+
+ <p class="gq-advanced-6"><b>Offscreen cache size</b>: Geeqie only renders the visible portion of an image. To reduce rendering the same area frequently when panning an image, some memory is used to retain the recently rendered image data. This value controls the maximum amount of memory to use.</p>
+
+ <p class="gq-advanced-12"><i>Note:</i> This setting controls the amount of memory <span class="gq-advanced-13">for <u>each</u> image window.</span></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-advanced-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_5_editor_commands.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-advanced-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-advanced-2"><a href="10_7_hidden.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-advanced-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-advanced-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-advanced-14"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Hidden options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041222;16151200">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_6_advanced.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Hidden – Options Explained</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_reference.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>10.7 Hidden Options</H1>
-<P><U>geeqierc</U></P>
-<P STYLE="margin-left: 0.79in">This section describes the options not
-accessible by the graphical interface, these options exist to
-maintain behavior of older releases of Geeqie. To change these
-settings, edit the Geeqie configuration file:</P>
-<PRE STYLE="margin-left: 1.58in; margin-bottom: 0.2in">($HOME)/.geeqie/geeqierc</PRE><P>
-<BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in"><B>lazy_image_sync: [true | <U>false</U>]</B>:
-This will suppress the image view from changing when selecting a new
-folder; the current image will remain displayed until the user
-manually selects another image.</P>
-<P STYLE="margin-left: 0.79in"><B>display_dialogs_under_mouse: [true
-| <U>false</U>]</B>: Enabling this will cause new dialogs to
-initially position themselves such that they are under the current
-mouse position.</P>
-<P STYLE="margin-left: 0.79in"><B>scroll_reset_method: value</B>:
-This will set the method used to set the scroll position, or visible
-region of a new image, value can be:</P>
-<P STYLE="margin-left: 1.58in; font-weight: medium">0: Move to upper
-left corner.<BR>1: Center image.<BR>2: Maintain same visible region
-as previous image, if possible.</P>
-<P STYLE="margin-left: 0.79in; font-style: normal; font-weight: medium; text-decoration: none">
-<B>dither_quality:</B> Set the quality when dithering images on
-displays with a limited color pallet:</P>
-<P STYLE="margin-left: 1.58in; font-style: normal; font-weight: medium; text-decoration: none">
-0: No dithering<BR>1: Normal<BR>2: Best</P>
-<P><BR><BR>
-</P>
-<P><U>Find Duplicates window</U></P>
-<P STYLE="margin-left: 0.79in"><B>[Control] + [Shift] + [Right Mouse
-click]</B>: Use this to display a dialog containing the data stored
-for the clicked image file. This is usually only useful for debugging
-purposes.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_6_advanced.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_reference.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Hidden options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041222;16151200" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-hidden-10 {margin-bottom: 0in}
+ p.gq-hidden-9 {margin-left: 1.58in; font-style: normal; font-weight: medium; text-decoration: none}
+ p.gq-hidden-8 {margin-left: 0.79in; font-style: normal; font-weight: medium; text-decoration: none}
+ p.gq-hidden-7 {margin-left: 1.58in; font-weight: medium}
+ pre.gq-hidden-6 {margin-left: 1.58in; margin-bottom: 0.2in}
+ p.gq-hidden-5 {margin-left: 0.79in}
+ div.gq-hidden-4 {text-align: center}
+ table.gq-hidden-3 {page-break-before: always}
+ p.gq-hidden-2 {text-align: right}
+ p.gq-hidden-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-hidden-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-hidden-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_6_advanced.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-hidden-1">Hidden – Options Explained</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-hidden-2"><a href="11_reference.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>10.7 Hidden Options</h1>
+
+ <p><u>geeqierc</u>
+ </p>
+
+ <p class="gq-hidden-5">This section describes the options not accessible by the graphical interface, these options exist to maintain behavior of older releases of Geeqie. To change these settings, edit the Geeqie configuration file:</p>
+
+ <pre class="gq-hidden-6">
+($HOME)/.geeqie/geeqierc
+</pre>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-hidden-5"><b>lazy_image_sync: [true | <u>false</u>]</b>: This will suppress the image view from changing when selecting a new folder; the current image will remain displayed until the user manually selects another image.</p>
+
+ <p class="gq-hidden-5"><b>display_dialogs_under_mouse: [true | <u>false</u>]</b>: Enabling this will cause new dialogs to initially position themselves such that they are under the current mouse position.</p>
+
+ <p class="gq-hidden-5"><b>scroll_reset_method: value</b>: This will set the method used to set the scroll position, or visible region of a new image, value can be:</p>
+
+ <p class="gq-hidden-7">0: Move to upper left corner.<br />
+ 1: Center image.<br />
+ 2: Maintain same visible region as previous image, if possible.</p>
+
+ <p class="gq-hidden-8"><b>dither_quality:</b> Set the quality when dithering images on displays with a limited color pallet:</p>
+
+ <p class="gq-hidden-9">0: No dithering<br />
+ 1: Normal<br />
+ 2: Best</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Find Duplicates window</u>
+ </p>
+
+ <p class="gq-hidden-5"><b>[Control] + [Shift] + [Right Mouse click]</b>: Use this to display a dialog containing the data stored for the clicked image file. This is usually only useful for debugging purposes.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-hidden-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_6_advanced.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-hidden-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-hidden-2"><a href="11_reference.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-hidden-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-hidden-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-hidden-10"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;8411800">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="9_printing.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Options Explained</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_1_general.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>10. Options Explained</H1>
-<P>This chapter attempts to explain in detail the Geeqie preferences
-dialog. Sections 10.1 through 10.6 each correspond to a tab within
-the dialog; section 10.7 lists options not configurable within the
-graphical interface.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">10.1 <A HREF="10_1_general.html">General
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.2 <A HREF="10_2_image.html">Image
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.3 <A HREF="10_3_window.html">Window
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.4 <A HREF="10_4_filtering.html">Filtering
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.5 <A HREF="10_5_editor_commands.html">Editor
-Commands</A></P>
-<P STYLE="margin-left: 0.79in">10.6 <A HREF="10_6_advanced.html">Advanced
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.7 <A HREF="10_7_hidden.html">Hidden
-Options</A></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="9_printing.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_1_general.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;8411800" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-options-6 {margin-bottom: 0in}
+ p.gq-options-5 {margin-left: 0.79in}
+ div.gq-options-4 {text-align: center}
+ table.gq-options-3 {page-break-before: always}
+ p.gq-options-2 {text-align: right}
+ p.gq-options-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-options-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-options-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="9_printing.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-options-1">Options Explained</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-options-2"><a href="10_1_general.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>10. Options Explained</h1>
+
+ <p>This chapter attempts to explain in detail the Geeqie preferences dialog. Sections 10.1 through 10.6 each correspond to a tab within the dialog; section 10.7 lists options not configurable within the graphical interface.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-options-5">10.1 <a href="10_1_general.html">General Options</a></p>
+
+ <p class="gq-options-5">10.2 <a href="10_2_image.html">Image Options</a></p>
+
+ <p class="gq-options-5">10.3 <a href="10_3_window.html">Window Options</a></p>
+
+ <p class="gq-options-5">10.4 <a href="10_4_filtering.html">Filtering Options</a></p>
+
+ <p class="gq-options-5">10.5 <a href="10_5_editor_commands.html">Editor Commands</a></p>
+
+ <p class="gq-options-5">10.6 <a href="10_6_advanced.html">Advanced Options</a></p>
+
+ <p class="gq-options-5">10.7 <a href="10_7_hidden.html">Hidden Options</a></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-options-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="9_printing.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-options-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-options-2"><a href="10_1_general.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-options-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-options-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-options-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Command Line Options - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041224;15024300">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_reference.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Command Line Options - Reference</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_2_keyboard_shortcuts.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>11.1 Command Line Options</H1>
-<P>These are the command line options available to Geeqie:</P>
-<CENTER>
- <TABLE WIDTH=80% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=51*>
- <COL WIDTH=77*>
- <COL WIDTH=128*>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P><B>Short Option</B></P>
- </TD>
- <TD WIDTH=30%>
- <P><B>Long Option</B></P>
- </TD>
- <TD WIDTH=50%>
- <P><B>Description</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>+t</P>
- </TD>
- <TD WIDTH=30%>
- <P>--with-tools</P>
- </TD>
- <TD WIDTH=50%>
- <P>Show file list, menu, and statusbar.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-t</P>
- </TD>
- <TD WIDTH=30%>
- <P>--without-tools</P>
- </TD>
- <TD WIDTH=50%>
- <P>Hide file list, menu, and statusbar. Window contains image
- only.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-f</P>
- </TD>
- <TD WIDTH=30%>
- <P>--fullscreen</P>
- </TD>
- <TD WIDTH=50%>
- <P>Start up in fullscreen.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-s</P>
- </TD>
- <TD WIDTH=30%>
- <P>--slideshow</P>
- </TD>
- <TD WIDTH=50%>
- <P>Start up in slideshow mode.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-l</P>
- </TD>
- <TD WIDTH=30%>
- <P>--list</P>
- </TD>
- <TD WIDTH=50%>
- <P>Open collection window containing images specified on the
- command line. Any collections on the command line will also be
- appended to this collection.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-r</P>
- </TD>
- <TD WIDTH=30%>
- <P>--remote</P>
- </TD>
- <TD WIDTH=50%>
- <P>Send command line options to existing Geeqie process.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-rh</P>
- </TD>
- <TD WIDTH=30%>
- <P>--remote-help</P>
- </TD>
- <TD WIDTH=50%>
- <P>List command line options available to --remote.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-h</P>
- </TD>
- <TD WIDTH=30%>
- <P>--help</P>
- </TD>
- <TD WIDTH=50%>
- <P>Display brief command line option list.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-v</P>
- </TD>
- <TD WIDTH=30%>
- <P>--version</P>
- </TD>
- <TD WIDTH=50%>
- <P>Display version of Geeqie.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=30%>
- <P>--debug</P>
- </TD>
- <TD WIDTH=50%>
- <P>Enable Debug output to console.</P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><U>Remote commands</U></P>
-<P STYLE="margin-left: 0.79in">The --remote command line option will
-send all entered commands to an existing Geeqie process, a new
-process will be started if one does not exist. These are the
-additional commands that can be used with the remote command:</P>
-<CENTER>
- <TABLE WIDTH=80% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=51*>
- <COL WIDTH=77*>
- <COL WIDTH=128*>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P><B>Short Option</B></P>
- </TD>
- <TD WIDTH=30%>
- <P><B>Long Option</B></P>
- </TD>
- <TD WIDTH=50%>
- <P><B>Description</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-n</P>
- </TD>
- <TD WIDTH=30%>
- <P>--next</P>
- </TD>
- <TD WIDTH=50%>
- <P>Change main window to display next image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-b</P>
- </TD>
- <TD WIDTH=30%>
- <P>--back</P>
- </TD>
- <TD WIDTH=50%>
- <P>Change main window to display previous image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=30%>
- <P>--first</P>
- </TD>
- <TD WIDTH=50%>
- <P>Change main window to display first image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=30%>
- <P>--last</P>
- </TD>
- <TD WIDTH=50%>
- <P>Change main window to display last image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-f</P>
- </TD>
- <TD WIDTH=30%>
- <P>--fullscreen</P>
- </TD>
- <TD WIDTH=50%>
- <P>Toggle full screen mode of the main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-fs</P>
- </TD>
- <TD WIDTH=30%>
- <P>--fullscreen-start</P>
- </TD>
- <TD WIDTH=50%>
- <P>Start full screen mode for main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-fS</P>
- </TD>
- <TD WIDTH=30%>
- <P>--fullscreen-stop</P>
- </TD>
- <TD WIDTH=50%>
- <P>Stop full screen mode for main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-s</P>
- </TD>
- <TD WIDTH=30%>
- <P>--slideshow</P>
- </TD>
- <TD WIDTH=50%>
- <P>Toggle slide show for main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-ss</P>
- </TD>
- <TD WIDTH=30%>
- <P>--slideshow-start</P>
- </TD>
- <TD WIDTH=50%>
- <P>Start slide show for main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-sS</P>
- </TD>
- <TD WIDTH=30%>
- <P>--slideshow-stop</P>
- </TD>
- <TD WIDTH=50%>
- <P>Stop slide show for main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-sr<folder></P>
- </TD>
- <TD WIDTH=30%>
- <P>--slideshow-recurse<folder></P>
- </TD>
- <TD WIDTH=50%>
- <P>Start recursive slide show for <folder> in main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-d<n></P>
- </TD>
- <TD WIDTH=30%>
- <P>--delay=<n></P>
- </TD>
- <TD WIDTH=50%>
- <P>Set slide show delay to <n> seconds, range is 0.1 to
- 3600</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>+t</P>
- </TD>
- <TD WIDTH=30%>
- <P>--tools-show</P>
- </TD>
- <TD WIDTH=50%>
- <P>Show tools for main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-t</P>
- </TD>
- <TD WIDTH=30%>
- <P>--tools-hide</P>
- </TD>
- <TD WIDTH=50%>
- <P>Hide tools for main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P>-q</P>
- </TD>
- <TD WIDTH=30%>
- <P>--quit</P>
- </TD>
- <TD WIDTH=50%>
- <P>Quit Geeqie.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=30%>
- <P>file:<filename></P>
- </TD>
- <TD WIDTH=50%>
- <P>Change main window to display <filename></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=20%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=30%>
- <P>view:<filename></P>
- </TD>
- <TD WIDTH=50%>
- <P>Open new window containing <filename></P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_reference.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_2_keyboard_shortcuts.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Command Line Options - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041224;15024300" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-command-line-7 {margin-bottom: 0in}
+ p.gq-command-line-6 {margin-left: 0.79in}
+ p.gq-command-line-5 {font-weight: bold}
+ div.gq-command-line-4 {text-align: center}
+ table.gq-command-line-3 {page-break-before: always}
+ p.gq-command-line-2 {text-align: right}
+ p.gq-command-line-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr">
+ <div class="gq-command-line-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-command-line-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_reference.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-command-line-1">Command Line Options - Reference</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-command-line-2"><a href="11_2_keyboard_shortcuts.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>11.1 Command Line Options</h1>
+
+ <p>These are the command line options available to Geeqie:</p>
+
+ <div class="gq-command-line-4">
+ <table width="80%" border="1" cellpadding="4" cellspacing="0">
+ <col width="51*" />
+ <col width="77*" />
+ <col width="128*" />
+
+ <tr valign="top">
+ <td width="20%">
+ <p class="gq-command-line-5">Short Option</p>
+ </td>
+
+ <td width="30%">
+ <p class="gq-command-line-5">Long Option</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-command-line-5">Description</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>+t</p>
+ </td>
+
+ <td width="30%">
+ <p>--with-tools</p>
+ </td>
+
+ <td width="50%">
+ <p>Show file list, menu, and statusbar.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-t</p>
+ </td>
+
+ <td width="30%">
+ <p>--without-tools</p>
+ </td>
+
+ <td width="50%">
+ <p>Hide file list, menu, and statusbar. Window contains image only.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-f</p>
+ </td>
+
+ <td width="30%">
+ <p>--fullscreen</p>
+ </td>
+
+ <td width="50%">
+ <p>Start up in fullscreen.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-s</p>
+ </td>
+
+ <td width="30%">
+ <p>--slideshow</p>
+ </td>
+
+ <td width="50%">
+ <p>Start up in slideshow mode.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-l</p>
+ </td>
+
+ <td width="30%">
+ <p>--list</p>
+ </td>
+
+ <td width="50%">
+ <p>Open collection window containing images specified on the command line. Any collections on the command line will also be appended to this collection.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-r</p>
+ </td>
+
+ <td width="30%">
+ <p>--remote</p>
+ </td>
+
+ <td width="50%">
+ <p>Send command line options to existing Geeqie process.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-rh</p>
+ </td>
+
+ <td width="30%">
+ <p>--remote-help</p>
+ </td>
+
+ <td width="50%">
+ <p>List command line options available to --remote.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-h</p>
+ </td>
+
+ <td width="30%">
+ <p>--help</p>
+ </td>
+
+ <td width="50%">
+ <p>Display brief command line option list.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-v</p>
+ </td>
+
+ <td width="30%">
+ <p>--version</p>
+ </td>
+
+ <td width="50%">
+ <p>Display version of Geeqie.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="30%">
+ <p>--debug</p>
+ </td>
+
+ <td width="50%">
+ <p>Enable Debug output to console.</p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Remote commands</u>
+ </p>
+
+ <p class="gq-command-line-6">The --remote command line option will send all entered commands to an existing Geeqie process, a new process will be started if one does not exist. These are the additional commands that can be used with the remote command:</p>
+
+ <div class="gq-command-line-4">
+ <table width="80%" border="1" cellpadding="4" cellspacing="0">
+ <col width="51*" />
+ <col width="77*" />
+ <col width="128*" />
+
+ <tr valign="top">
+ <td width="20%">
+ <p class="gq-command-line-5">Short Option</p>
+ </td>
+
+ <td width="30%">
+ <p class="gq-command-line-5">Long Option</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-command-line-5">Description</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-n</p>
+ </td>
+
+ <td width="30%">
+ <p>--next</p>
+ </td>
+
+ <td width="50%">
+ <p>Change main window to display next image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-b</p>
+ </td>
+
+ <td width="30%">
+ <p>--back</p>
+ </td>
+
+ <td width="50%">
+ <p>Change main window to display previous image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="30%">
+ <p>--first</p>
+ </td>
+
+ <td width="50%">
+ <p>Change main window to display first image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="30%">
+ <p>--last</p>
+ </td>
+
+ <td width="50%">
+ <p>Change main window to display last image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-f</p>
+ </td>
+
+ <td width="30%">
+ <p>--fullscreen</p>
+ </td>
+
+ <td width="50%">
+ <p>Toggle full screen mode of the main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-fs</p>
+ </td>
+
+ <td width="30%">
+ <p>--fullscreen-start</p>
+ </td>
+
+ <td width="50%">
+ <p>Start full screen mode for main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-fS</p>
+ </td>
+
+ <td width="30%">
+ <p>--fullscreen-stop</p>
+ </td>
+
+ <td width="50%">
+ <p>Stop full screen mode for main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-s</p>
+ </td>
+
+ <td width="30%">
+ <p>--slideshow</p>
+ </td>
+
+ <td width="50%">
+ <p>Toggle slide show for main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-ss</p>
+ </td>
+
+ <td width="30%">
+ <p>--slideshow-start</p>
+ </td>
+
+ <td width="50%">
+ <p>Start slide show for main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-sS</p>
+ </td>
+
+ <td width="30%">
+ <p>--slideshow-stop</p>
+ </td>
+
+ <td width="50%">
+ <p>Stop slide show for main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-sr<folder></p>
+ </td>
+
+ <td width="30%">
+ <p>--slideshow-recurse<folder></p>
+ </td>
+
+ <td width="50%">
+ <p>Start recursive slide show for <folder> in main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-d<n></p>
+ </td>
+
+ <td width="30%">
+ <p>--delay=<n></p>
+ </td>
+
+ <td width="50%">
+ <p>Set slide show delay to <n> seconds, range is 0.1 to 3600</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>+t</p>
+ </td>
+
+ <td width="30%">
+ <p>--tools-show</p>
+ </td>
+
+ <td width="50%">
+ <p>Show tools for main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-t</p>
+ </td>
+
+ <td width="30%">
+ <p>--tools-hide</p>
+ </td>
+
+ <td width="50%">
+ <p>Hide tools for main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p>-q</p>
+ </td>
+
+ <td width="30%">
+ <p>--quit</p>
+ </td>
+
+ <td width="50%">
+ <p>Quit Geeqie.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="30%">
+ <p>file:<filename></p>
+ </td>
+
+ <td width="50%">
+ <p>Change main window to display <filename></p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="20%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="30%">
+ <p>view:<filename></p>
+ </td>
+
+ <td width="50%">
+ <p>Open new window containing <filename></p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p class="gq-command-line-7"><br />
+ </p>
+
+ <p class="gq-command-line-7"><br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-command-line-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_reference.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-command-line-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-command-line-2"><a href="11_2_keyboard_shortcuts.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-command-line-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-command-line-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-command-line-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Keyboard Shortcuts - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;8403200">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_1_command_line.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Keyboard Shortcuts - Reference</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_3_thumbnails.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>11.2 Keyboard Shortcuts</H1>
-<CENTER>
- <TABLE WIDTH=90% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=2 CELLSPACING=0 RULES=ROWS STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><B>Shortcut</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><B>Mouse</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>Action</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>Image Navigation</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>PageDown</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Left Click on image view<BR>Mouse Wheel down (*)</P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to next image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>PageUp</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Middle Click on image view<BR>Mouse Wheel up (*)</P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to previous image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Home</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to first image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>End</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to last image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD COLSPAN=2 WIDTH=67%>
- <P ALIGN=LEFT><B>Image panning</B> (image has keyboard focus)</P>
- </TD>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Left Drag on image view<BR>[Shift] + Mouse Wheel
- (*)</P>
- </TD>
- <TD WIDTH=33%>
- <P>Pan image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Shift] + Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Pan Image faster.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Pan to respective edge of image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>SpaceBar</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to next image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Backspace</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to previous image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>File Menu</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + N</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>New Window</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>C</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open a new empty collection window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>O</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Display open collection dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>F3</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open new search window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>D</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open new Find Duplicates window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Shift] + P</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open print dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + F</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Create new folder in current path.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + C</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Copy selected images, opens destination selection dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + M</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Move selected images, opens destination selection dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + R</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Rename selected images, opens rename dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + D<BR>[Delete]</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Delete selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + W</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Close window, Geeqie exits when last window is closed.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + Q</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Quit Geeqie.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>Edit Menu</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + 1 ... 0</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Run external edit command on selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + A</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Select all images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + [Shift] + A</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Unselect all images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + P</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open image properties window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + O</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open Geeqie preferences window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>]</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Rotate image clockwise 90 degrees.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Rotate image counterclockwise 90 degree.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Shift] + R</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Rotate image 180 degrees.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Shift] + M</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Flip image horizontally (mirror).</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Shift] + F</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Flip image vertically.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>View Menu</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>+, =</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + Mouse Wheel up</P>
- </TD>
- <TD WIDTH=33%>
- <P>Zoom image in.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>-</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control + Mouse Wheel down</P>
- </TD>
- <TD WIDTH=33%>
- <P>Zoom image out.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Z</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Reset zoom to original size (1:1).</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>X</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Fit image to window size.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>W</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Zoom image to fit window width.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>H</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Zoom image to fit window height.</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="1" SDNUM="1033;">
- <P ALIGN=CENTER>1</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P>Set zoom to 1:1</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="2" SDNUM="1033;">
- <P ALIGN=CENTER>2</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P>Set zoom to 2:1</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="3" SDNUM="1033;">
- <P ALIGN=CENTER>3</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P>Set zoom to 3:1</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="4" SDNUM="1033;">
- <P ALIGN=CENTER>4</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P>Set zoom to 4:1</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="7" SDNUM="1033;">
- <P ALIGN=CENTER>7</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P>Set zoom to 1:4</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="8" SDNUM="1033;">
- <P ALIGN=CENTER>8</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P>Set zoom to 1:3</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="9" SDNUM="1033;">
- <P ALIGN=CENTER>9</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P>Set zoom to 1:2</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>T</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle display of thumbnails when in list view.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + L</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Display file list as detailed list view.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + I</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Display file list as icon view.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + T</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle folder display between list and tree views.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>R</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Refresh file list.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>L</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle floating of file display.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + H</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle hiding of file display.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + E</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle EXIF sidebar.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + S</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle Sort Manager sidebar.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + K</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle Keywords sidebar.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>F</P>
- <P ALIGN=CENTER>V</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle full screen.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>I</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle information overlay in full screen.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>S</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle slideshow.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>P</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle pause of slideshow.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>Help Menu</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>F1</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open User Manual in browser.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>Collection Window</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Move selection.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Shift] + Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Select multiple images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Move focus without changing selection.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[SpaceBar]</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Select only image with focus.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + [SpaceBar]</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle selection of image with focus.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Home]</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Move focus to first image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[End]</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Move focus to last image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + A</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Select all images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + [Shift] + A</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Unselect all images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Delete]</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Remove selected image from collection, does not delete image
- from disk.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + L</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Add images from main window's file list.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + T</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Toggle display of icon filenames.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>N</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Sort collection by name.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>D</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Sort collection by file date.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>B</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Sort collection by file size.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>P</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Sort collection by file path.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>I</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Sort collection by natural numerical order.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Enter]</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>View image with focus in main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>V</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>View image with focus in new window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + 1 ... 0</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Run external edit command on selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>S</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Save collection.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + S</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Save collection as, opens destination dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>A</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Append to collection, opens append dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + C</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Copy selected images, opens destination selection dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + M</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Move selected images, opens destination selection dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + R</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Rename selected images, opens rename dialog.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + D</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Delete selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + P</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open image properties window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + W</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Close collection window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR>
- <TD COLSPAN=3 WIDTH=100% VALIGN=TOP>
- <P ALIGN=LEFT><B>Find Duplicates Window</B> (same as Collection
- Window above, with the following additions)</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="1" SDNUM="1033;">
- <P ALIGN=CENTER STYLE="font-weight: medium">1</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P STYLE="font-weight: medium">Select group 1 duplicates.</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=33% VALIGN=BOTTOM SDVAL="2" SDNUM="1033;">
- <P ALIGN=CENTER STYLE="font-weight: medium">2</P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33% VALIGN=TOP>
- <P STYLE="font-weight: medium">Select group 2 duplicates.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>C</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Open new collection window and add selected images.</P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">(*) Default Mouse wheel functions, can
-be altered by changing <SPAN STYLE="text-decoration: none">the <A HREF="10_6_advanced.html">Mouse
-wheel scrolls image</A> option.</SPAN></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_1_command_line.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_3_thumbnails.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Keyboard Shortcuts - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;8403200" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-keyboard-shortcuts-12 {margin-bottom: 0in}
+ p.gq-keyboard-shortcuts-11 {margin-left: 0.79in}
+ span.gq-keyboard-shortcuts-10 {text-decoration: none}
+ p.gq-keyboard-shortcuts-9 {font-weight: medium}
+ p.gq-keyboard-shortcuts-8 {font-weight: medium; text-align: center}
+ p.gq-keyboard-shortcuts-7 {text-align: left}
+ p.gq-keyboard-shortcuts-6 {font-weight: bold; text-align: left}
+ p.gq-keyboard-shortcuts-5 {font-weight: bold; text-align: center}
+ div.gq-keyboard-shortcuts-4 {text-align: center}
+ table.gq-keyboard-shortcuts-3 {page-break-before: always}
+ p.gq-keyboard-shortcuts-2 {text-align: right}
+ p.gq-keyboard-shortcuts-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr">
+ <div class="gq-keyboard-shortcuts-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-keyboard-shortcuts-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_1_command_line.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Keyboard Shortcuts - Reference</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-2"><a href="11_3_thumbnails.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>11.2 Keyboard Shortcuts</h1>
+
+ <div class="gq-keyboard-shortcuts-4">
+ <table width="90%" border="1" cellpadding="2" cellspacing="0" rules="ROWS" class="gq-keyboard-shortcuts-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-5">Shortcut</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-5">Mouse</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-6">Action</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-6">Image Navigation</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-7"><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">PageDown</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Left Click on image view<br />
+ Mouse Wheel down (*)</p>
+ </td>
+
+ <td width="33%">
+ <p>Change to next image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">PageUp</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Middle Click on image view<br />
+ Mouse Wheel up (*)</p>
+ </td>
+
+ <td width="33%">
+ <p>Change to previous image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Home</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Change to first image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">End</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Change to last image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td colspan="2" width="67%">
+ <p class="gq-keyboard-shortcuts-7"><b>Image panning</b> (image has keyboard focus)</p>
+ </td>
+
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Left Drag on image view<br />
+ [Shift] + Mouse Wheel (*)</p>
+ </td>
+
+ <td width="33%">
+ <p>Pan image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Shift] + Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Pan Image faster.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Pan to respective edge of image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">SpaceBar</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Change to next image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Backspace</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Change to previous image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-6">File Menu</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + N</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>New Window</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">C</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open a new empty collection window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">O</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Display open collection dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">F3</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open new search window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">D</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open new Find Duplicates window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Shift] + P</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open print dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + F</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Create new folder in current path.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + C</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Copy selected images, opens destination selection dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + M</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Move selected images, opens destination selection dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + R</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Rename selected images, opens rename dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + D<br />
+ [Delete]</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Delete selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + W</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Close window, Geeqie exits when last window is closed.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + Q</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Quit Geeqie.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-6">Edit Menu</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + 1 ... 0</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Run external edit command on selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + A</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Select all images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + [Shift] + A</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Unselect all images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + P</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open image properties window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + O</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open Geeqie preferences window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">]</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Rotate image clockwise 90 degrees.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Rotate image counterclockwise 90 degree.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Shift] + R</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Rotate image 180 degrees.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Shift] + M</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Flip image horizontally (mirror).</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Shift] + F</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Flip image vertically.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-6">View Menu</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">+, =</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + Mouse Wheel up</p>
+ </td>
+
+ <td width="33%">
+ <p>Zoom image in.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">-</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control + Mouse Wheel down</p>
+ </td>
+
+ <td width="33%">
+ <p>Zoom image out.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Z</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Reset zoom to original size (1:1).</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">X</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Fit image to window size.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">W</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Zoom image to fit window width.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">H</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Zoom image to fit window height.</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-1">1</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p>Set zoom to 1:1</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-1">2</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p>Set zoom to 2:1</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-1">3</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p>Set zoom to 3:1</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-1">4</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p>Set zoom to 4:1</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-1">7</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p>Set zoom to 1:4</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-1">8</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p>Set zoom to 1:3</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-1">9</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p>Set zoom to 1:2</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">T</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle display of thumbnails when in list view.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + L</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Display file list as detailed list view.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + I</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Display file list as icon view.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + T</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle folder display between list and tree views.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">R</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Refresh file list.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">L</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle floating of file display.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + H</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle hiding of file display.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + E</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle EXIF sidebar.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + S</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle Sort Manager sidebar.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + K</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle Keywords sidebar.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">F</p>
+
+ <p class="gq-keyboard-shortcuts-1">V</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle full screen.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">I</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle information overlay in full screen.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">S</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle slideshow.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">P</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle pause of slideshow.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-6">Help Menu</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">F1</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open User Manual in browser.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-6">Collection Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Move selection.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Shift] + Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Select multiple images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Move focus without changing selection.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[SpaceBar]</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Select only image with focus.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + [SpaceBar]</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle selection of image with focus.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Home]</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Move focus to first image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[End]</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Move focus to last image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + A</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Select all images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + [Shift] + A</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Unselect all images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Delete]</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Remove selected image from collection, does not delete image from disk.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + L</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Add images from main window's file list.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + T</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Toggle display of icon filenames.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">N</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Sort collection by name.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">D</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Sort collection by file date.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">B</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Sort collection by file size.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">P</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Sort collection by file path.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">I</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Sort collection by natural numerical order.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Enter]</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>View image with focus in main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">V</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>View image with focus in new window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + 1 ... 0</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Run external edit command on selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">S</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Save collection.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + S</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Save collection as, opens destination dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">A</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Append to collection, opens append dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + C</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Copy selected images, opens destination selection dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + M</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Move selected images, opens destination selection dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + R</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Rename selected images, opens rename dialog.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + D</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Delete selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + P</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open image properties window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">[Control] + W</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Close collection window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr>
+ <td colspan="3" width="100%" valign="top">
+ <p class="gq-keyboard-shortcuts-7"><b>Find Duplicates Window</b> (same as Collection Window above, with the following additions)</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-8">1</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-9">Select group 1 duplicates.</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="33%" valign="bottom">
+ <p class="gq-keyboard-shortcuts-8">2</p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%" valign="top">
+ <p class="gq-keyboard-shortcuts-9">Select group 2 duplicates.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1">C</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Open new collection window and add selected images.</p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-keyboard-shortcuts-11">(*) Default Mouse wheel functions, can be altered by changing <span class="gq-keyboard-shortcuts-10">the <a href="10_6_advanced.html">Mouse wheel scrolls image</a> option.</span></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-keyboard-shortcuts-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_1_command_line.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-2"><a href="11_3_thumbnails.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keyboard-shortcuts-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-keyboard-shortcuts-12"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Thumbnails - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;9432500">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_2_keyboard_shortcuts.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Thumbnails - Reference</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_4_management.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>11.3 Thumbnails</H1>
-<P STYLE="text-decoration: none"><I>Note: This page only refers the
-Geeqie thumbnail caching mechanism, the shared thumbnail cache
-mechanism is not explained here.</I></P>
-<P><U>Format</U></P>
-<P STYLE="margin-left: 0.79in">Thumbnails are stored in PNG image
-format. The thumbnail name is the name of the source image with
-“.png” appended.</P>
-<P STYLE="margin-left: 0.79in">The modification time (mtime) of the
-thumbnail is set to match the source file. Thumbnails are regenerated
-when the timestamps of the thumbnail and source file do not match.</P>
-<P STYLE="margin-left: 0.79in"><BR><BR>
-</P>
-<P><U>Location</U></P>
-<P STYLE="margin-left: 0.79in">Thumbnails are stored in:</P>
-<P STYLE="margin-left: 1.58in">($HOME)/.geeqie/thumbnails</P>
-<P STYLE="margin-left: 0.79in">The directory structure of the
-thumbnail cache duplicates the location of the source files, for
-example a source file with the name:</P>
-<P STYLE="margin-left: 1.58in">/path/to/image.jpg</P>
-<P STYLE="margin-left: 0.79in">will store the thumbnail in:</P>
-<P STYLE="margin-left: 1.58in">($HOME)/.geeqie/thumbnails/path/to/image.jpg.png</P>
-<P STYLE="margin-left: 0.79in">When thumbnails are to be stored local
-to the source file, the thumbnail will be placed in:</P>
-<P STYLE="margin-left: 1.58in">/path/to/.thumbnails/image.jpg.png</P>
-<P STYLE="margin-left: 0.79in">Local thumbnail caching is enabled
-with the option “Cache thumbnails into .thumbnails” on
-the <A HREF="10_1_general.html">General</A> tab of the options
-dialog. If it is not possible to store the thumbnail local to the
-source file (usually due to no write permissions), Geeqie will fall
-back to saving the thumbnail in the user's ($HOME)/.geeqie/thumbnails
-folder.</P>
-<P><BR><BR>
-</P>
-<P><U>Size</U></P>
-<P STYLE="margin-left: 0.79in">Geeqie allows the following sizes for
-thumbnails:</P>
-<P STYLE="margin-left: 1.58in">24x24, 32x32, 48x48, 64x64, 96x72,
-96x96, 129x96, 128x128, 160x120, 160x160, 192x144, 192x192, 256x192,
-256x256</P>
-<P STYLE="margin-left: 0.79in">The thumbnail is scaled to fit within
-the preferred size maintaining the aspect ratio. Thumbnails are not
-cached for images that are equal to or smaller than the preferred
-thumbnail size.</P>
-<P STYLE="margin-left: 0.79in">When a cached thumbnail's width and
-height do not match the preferred size, the thumbnail is regenerated.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_2_keyboard_shortcuts.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_4_management.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Thumbnails - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;9432500" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-thumbnails-8 {margin-bottom: 0in}
+ p.gq-thumbnails-7 {margin-left: 1.58in}
+ p.gq-thumbnails-6 {margin-left: 0.79in}
+ p.gq-thumbnails-5 {font-style: italic; text-decoration: none}
+ div.gq-thumbnails-4 {text-align: center}
+ table.gq-thumbnails-3 {page-break-before: always}
+ p.gq-thumbnails-2 {text-align: right}
+ p.gq-thumbnails-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-thumbnails-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-thumbnails-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_2_keyboard_shortcuts.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-thumbnails-1">Thumbnails - Reference</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-thumbnails-2"><a href="11_4_management.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>11.3 Thumbnails</h1>
+
+ <p class="gq-thumbnails-5">Note: This page only refers the Geeqie thumbnail caching mechanism, the shared thumbnail cache mechanism is not explained here.</p>
+
+ <p><u>Format</u>
+ </p>
+
+ <p class="gq-thumbnails-6">Thumbnails are stored in PNG image format. The thumbnail name is the name of the source image with “.png” appended.</p>
+
+ <p class="gq-thumbnails-6">The modification time (mtime) of the thumbnail is set to match the source file. Thumbnails are regenerated when the timestamps of the thumbnail and source file do not match.</p>
+
+ <p class="gq-thumbnails-6"><br />
+ <br />
+ </p>
+
+ <p><u>Location</u>
+ </p>
+
+ <p class="gq-thumbnails-6">Thumbnails are stored in:</p>
+
+ <p class="gq-thumbnails-7">($HOME)/.geeqie/thumbnails</p>
+
+ <p class="gq-thumbnails-6">The directory structure of the thumbnail cache duplicates the location of the source files, for example a source file with the name:</p>
+
+ <p class="gq-thumbnails-7">/path/to/image.jpg</p>
+
+ <p class="gq-thumbnails-6">will store the thumbnail in:</p>
+
+ <p class="gq-thumbnails-7">($HOME)/.geeqie/thumbnails/path/to/image.jpg.png</p>
+
+ <p class="gq-thumbnails-6">When thumbnails are to be stored local to the source file, the thumbnail will be placed in:</p>
+
+ <p class="gq-thumbnails-7">/path/to/.thumbnails/image.jpg.png</p>
+
+ <p class="gq-thumbnails-6">Local thumbnail caching is enabled with the option “Cache thumbnails into .thumbnails” on the <a href="10_1_general.html">General</a> tab of the options dialog. If it is not possible to store the thumbnail local to the source file (usually due to no write permissions), Geeqie will fall back to saving the thumbnail in the user's ($HOME)/.geeqie/thumbnails folder.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Size</u>
+ </p>
+
+ <p class="gq-thumbnails-6">Geeqie allows the following sizes for thumbnails:</p>
+
+ <p class="gq-thumbnails-7">24x24, 32x32, 48x48, 64x64, 96x72, 96x96, 129x96, 128x128, 160x120, 160x160, 192x144, 192x192, 256x192, 256x256</p>
+
+ <p class="gq-thumbnails-6">The thumbnail is scaled to fit within the preferred size maintaining the aspect ratio. Thumbnails are not cached for images that are equal to or smaller than the preferred thumbnail size.</p>
+
+ <p class="gq-thumbnails-6">When a cached thumbnail's width and height do not match the preferred size, the thumbnail is regenerated.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-thumbnails-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_2_keyboard_shortcuts.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-thumbnails-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-thumbnails-2"><a href="11_4_management.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-thumbnails-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-thumbnails-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-thumbnails-8"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Cache and Data Management - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050208;15085100">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_3_thumbnails.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Cache and Data Management - Reference</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="12_credits.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>11.4 Cache and Data Maintenance</H1>
-<P>Thumbnails and other cached data can be maintained from the dialog
-accessible by selecting Thumbnail maintenance from the Edit menu of
-the main window.</P>
-<P><BR><BR>
-</P>
-<P><U>Geeqie thumbnail cache</U></P>
-<P STYLE="margin-left: 0.79in">The utilities listed here operate on
-the Geeqie caching mechanism. This also includes the data cached for
-the <A HREF="5_1_search.html">search</A> and <A HREF="5_2_finding_duplicates.html">find
-duplicates</A> utilities.</P>
-<P STYLE="margin-left: 0.79in"><B>Clean up</B>: Removes thumbnails
-and data for which the source image is no longer present, or has been
-modified since the thumbnail was generated.</P>
-<P STYLE="margin-left: 0.79in"><B>Clear cache:</B> Removes all
-thumbnails and data stored in the user's home folder:
-$HOME/.geeqie/thumbnails.</P>
-<P><BR><BR>
-</P>
-<P><U>Shared thumbnail cache</U></P>
-<P STYLE="margin-left: 0.79in">The utilities listed here operate on
-the shared thumbnail mechanism.</P>
-<P STYLE="margin-left: 0.79in"><B>Clean up:</B> Removes thumbnails
-for which the source image is no longer present, or has been modified
-since the thumbnail was generated.</P>
-<P STYLE="margin-left: 0.79in"><B>Clear cache:</B> Removes all
-thumbnails stored in the user's home folder: $HOME/.thumbnails.</P>
-<P><BR><BR>
-</P>
-<P><U>Create thumbnails</U></P>
-<P STYLE="margin-left: 0.79in">This utility will render thumbnails
-using the current thumbnail caching mechanism, as determined in
-<A HREF="10_1_general.html">preferences</A>.</P>
-<P STYLE="margin-left: 0.79in"><B>Render:</B> Pre-render thumbnails
-for a specific folder, the utility has the following options:</P>
-<P STYLE="margin-left: 1.58in"><B>Include subfolders:</B> Enable to
-include all images contained in the subfolders of folder.</P>
-<P STYLE="margin-left: 1.58in"><B>Store thumbnails local to source
-images:</B> The generated thumbnails will be stored local to the
-source images, if you have the permissions to write to the folder
-containing the images.</P>
-<P><BR><BR>
-</P>
-<P><U>Metadata</U></P>
-<P STYLE="margin-left: 0.79in">This utility operates on the data
-store for <A HREF="7_3_keywords.html">keywords and comments</A>
-located in the user's home folder: $HOME/.geeqie/metadata.</P>
-<P STYLE="margin-left: 0.79in"><B>Clean up:</B> Removes keywords and
-comments for which the source image is no longer present.</P>
-<P><BR><BR>
-</P>
-<P><U>File locations</U></P>
-<P STYLE="margin-left: 0.79in">The various file locations and their
-use are listed below. <I><HOME></I> refers to your home folder
-and <I><SOURCE></I> refers to the folder containing the image.</P>
-<CENTER>
- <TABLE WIDTH=80% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=128*>
- <COL WIDTH=128*>
- <TR VALIGN=TOP>
- <TH WIDTH=50%>
- <P>Folder or File name</P>
- </TH>
- <TH WIDTH=50%>
- <P>Description</P>
- </TH>
- </TR>
- <TR>
- <TD COLSPAN=2 WIDTH=100% VALIGN=TOP>
- <P><B>Thumbnails</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><HOME></I>/.thumbnails</P>
- </TD>
- <TD WIDTH=50%>
- <P>Shared thumbnail cache folder.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><HOME></I>/.geeqie/thumbnails</P>
- </TD>
- <TD WIDTH=50%>
- <P>Classic Geeqie thumbnail cache folder. Also used to cache data
- used for the search and find duplicates utilities to increase the
- speed for subsequent searches.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><SOURCE>/.</I><SPAN STYLE="font-style: normal">thumbnails</SPAN></P>
- </TD>
- <TD WIDTH=50%>
- <P>Local thumbnail cache folder.</P>
- </TD>
- </TR>
- <TR>
- <TD COLSPAN=2 WIDTH=100% VALIGN=TOP>
- <P><B>Metadata</B><SPAN STYLE="font-weight: medium"> (keywords
- and comments)</SPAN></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><HOME></I>/.geeqie/metadata</P>
- </TD>
- <TD WIDTH=50%>
- <P>Metadata stored in user's home folder.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><SOURCE></I>/.metadata</P>
- </TD>
- <TD WIDTH=50%>
- <P>Metadata stored local to source image. Requires option to be
- enabled in advanced preferences.</P>
- </TD>
- </TR>
- <TR>
- <TD COLSPAN=2 WIDTH=100% VALIGN=TOP>
- <P><B>Collections</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><HOME></I>/.geeqie/collections</P>
- </TD>
- <TD WIDTH=50%>
- <P>Default location for Geeqie collections, collections in this
- folder will appear in the <A HREF="7_2_sort_manager.html">sort
- manager</A> sidebar.</P>
- </TD>
- </TR>
- <TR>
- <TD COLSPAN=2 WIDTH=100% VALIGN=TOP>
- <P><B>Preferences</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><HOME></I>/.geeqie</P>
- </TD>
- <TD WIDTH=50%>
- <P>Geeqie preferences folder.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><HOME></I>/.geeqie/geeqierc</P>
- </TD>
- <TD WIDTH=50%>
- <P>Geeqie preferences rc file.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><HOME></I>/.geeqie/history</P>
- </TD>
- <TD WIDTH=50%>
- <P>Historic data such as last several folders visited, bookmarks,
- and recently used collections. Also contains default print
- settings.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><I><HOME></I>/.geeqie/accels</P>
- </TD>
- <TD WIDTH=50%>
- <P>Keyboard shortcut mapping.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><B>Safe Delete</B></P>
- </TD>
- <TD WIDTH=50%>
- <P><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><SPAN STYLE="font-weight: medium"><I><HOME></I></SPAN>/.geeqie/trash</P>
- </TD>
- <TD WIDTH=50%>
- <P>Default location of the safe delete folder.</P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_3_thumbnails.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="12_credits.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Cache and Data Management - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050208;15085100" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-management-10 {margin-bottom: 0in}
+ span.gq-management-9 {font-weight: medium}
+ span.gq-management-8 {font-style: normal}
+ p.gq-management-7 {font-weight: bold}
+ p.gq-management-6 {margin-left: 1.58in}
+ p.gq-management-5 {margin-left: 0.79in}
+ div.gq-management-4 {text-align: center}
+ table.gq-management-3 {page-break-before: always}
+ p.gq-management-2 {text-align: right}
+ p.gq-management-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr">
+ <div class="gq-management-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-management-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_3_thumbnails.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-management-1">Cache and Data Management - Reference</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-management-2"><a href="12_credits.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>11.4 Cache and Data Maintenance</h1>
+
+ <p>Thumbnails and other cached data can be maintained from the dialog accessible by selecting Thumbnail maintenance from the Edit menu of the main window.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Geeqie thumbnail cache</u>
+ </p>
+
+ <p class="gq-management-5">The utilities listed here operate on the Geeqie caching mechanism. This also includes the data cached for the <a href="5_1_search.html">search</a> and <a href="5_2_finding_duplicates.html">find duplicates</a> utilities.</p>
+
+ <p class="gq-management-5"><b>Clean up</b>: Removes thumbnails and data for which the source image is no longer present, or has been modified since the thumbnail was generated.</p>
+
+ <p class="gq-management-5"><b>Clear cache:</b> Removes all thumbnails and data stored in the user's home folder: $HOME/.geeqie/thumbnails.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Shared thumbnail cache</u>
+ </p>
+
+ <p class="gq-management-5">The utilities listed here operate on the shared thumbnail mechanism.</p>
+
+ <p class="gq-management-5"><b>Clean up:</b> Removes thumbnails for which the source image is no longer present, or has been modified since the thumbnail was generated.</p>
+
+ <p class="gq-management-5"><b>Clear cache:</b> Removes all thumbnails stored in the user's home folder: $HOME/.thumbnails.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Create thumbnails</u>
+ </p>
+
+ <p class="gq-management-5">This utility will render thumbnails using the current thumbnail caching mechanism, as determined in <a href="10_1_general.html">preferences</a>.</p>
+
+ <p class="gq-management-5"><b>Render:</b> Pre-render thumbnails for a specific folder, the utility has the following options:</p>
+
+ <p class="gq-management-6"><b>Include subfolders:</b> Enable to include all images contained in the subfolders of folder.</p>
+
+ <p class="gq-management-6"><b>Store thumbnails local to source images:</b> The generated thumbnails will be stored local to the source images, if you have the permissions to write to the folder containing the images.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Metadata</u>
+ </p>
+
+ <p class="gq-management-5">This utility operates on the data store for <a href="7_3_keywords.html">keywords and comments</a> located in the user's home folder: $HOME/.geeqie/metadata.</p>
+
+ <p class="gq-management-5"><b>Clean up:</b> Removes keywords and comments for which the source image is no longer present.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>File locations</u>
+ </p>
+
+ <p class="gq-management-5">The various file locations and their use are listed below. <i><HOME></i> refers to your home folder and <i><SOURCE></i> refers to the folder containing the image.</p>
+
+ <div class="gq-management-4">
+ <table width="80%" border="1" cellpadding="4" cellspacing="0">
+ <col width="128*" />
+ <col width="128*" />
+
+ <tr valign="top">
+ <th width="50%">
+ <p>Folder or File name</p>
+ </th>
+
+ <th width="50%">
+ <p>Description</p>
+ </th>
+ </tr>
+
+ <tr>
+ <td colspan="2" width="100%" valign="top">
+ <p class="gq-management-7">Thumbnails</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><HOME></i>/.thumbnails</p>
+ </td>
+
+ <td width="50%">
+ <p>Shared thumbnail cache folder.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><HOME></i>/.geeqie/thumbnails</p>
+ </td>
+
+ <td width="50%">
+ <p>Classic Geeqie thumbnail cache folder. Also used to cache data used for the search and find duplicates utilities to increase the speed for subsequent searches.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><SOURCE>/.</i><span class="gq-management-8">thumbnails</span>
+ </p>
+ </td>
+
+ <td width="50%">
+ <p>Local thumbnail cache folder.</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td colspan="2" width="100%" valign="top">
+ <p><b>Metadata</b> <span class="gq-management-9">(keywords and comments)</span></p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><HOME></i>/.geeqie/metadata</p>
+ </td>
+
+ <td width="50%">
+ <p>Metadata stored in user's home folder.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><SOURCE></i>/.metadata</p>
+ </td>
+
+ <td width="50%">
+ <p>Metadata stored local to source image. Requires option to be enabled in advanced preferences.</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td colspan="2" width="100%" valign="top">
+ <p class="gq-management-7">Collections</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><HOME></i>/.geeqie/collections</p>
+ </td>
+
+ <td width="50%">
+ <p>Default location for Geeqie collections, collections in this folder will appear in the <a href="7_2_sort_manager.html">sort manager</a> sidebar.</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td colspan="2" width="100%" valign="top">
+ <p class="gq-management-7">Preferences</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><HOME></i>/.geeqie</p>
+ </td>
+
+ <td width="50%">
+ <p>Geeqie preferences folder.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><HOME></i>/.geeqie/geeqierc</p>
+ </td>
+
+ <td width="50%">
+ <p>Geeqie preferences rc file.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><HOME></i>/.geeqie/history</p>
+ </td>
+
+ <td width="50%">
+ <p>Historic data such as last several folders visited, bookmarks, and recently used collections. Also contains default print settings.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><i><HOME></i>/.geeqie/accels</p>
+ </td>
+
+ <td width="50%">
+ <p>Keyboard shortcut mapping.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p class="gq-management-7">Safe Delete</p>
+ </td>
+
+ <td width="50%">
+ <p><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p><span class="gq-management-9"><i><HOME></i></span>/.geeqie/trash</p>
+ </td>
+
+ <td width="50%">
+ <p>Default location of the safe delete folder.</p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-management-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_3_thumbnails.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-management-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-management-2"><a href="12_credits.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-management-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-management-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-management-10"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Reference - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040809;22213200">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_7_hidden.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Reference</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_1_command_line.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>11. Reference</H1>
-<P><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">11.1 <A HREF="11_1_command_line.html">Command
-Line</A> Options</P>
-<P STYLE="margin-left: 0.79in">11.2 <A HREF="11_2_keyboard_shortcuts.html">Keyboard
-Shortcuts</A></P>
-<P STYLE="margin-left: 0.79in">11.3 <A HREF="11_3_thumbnails.html">Thumbnails</A></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="10_7_hidden.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="11_1_command_line.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Reference - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040809;22213200" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-reference-6 {margin-bottom: 0in}
+ p.gq-reference-5 {margin-left: 0.79in}
+ div.gq-reference-4 {text-align: center}
+ table.gq-reference-3 {page-break-before: always}
+ p.gq-reference-2 {text-align: right}
+ p.gq-reference-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-reference-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-reference-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_7_hidden.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-reference-1">Reference</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-reference-2"><a href="11_1_command_line.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>11. Reference</h1>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-reference-5">11.1 <a href="11_1_command_line.html">Command Line</a> Options</p>
+
+ <p class="gq-reference-5">11.2 <a href="11_2_keyboard_shortcuts.html">Keyboard Shortcuts</a></p>
+
+ <p class="gq-reference-5">11.3 <a href="11_3_thumbnails.html">Thumbnails</a></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-reference-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="10_7_hidden.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-reference-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-reference-2"><a href="11_1_command_line.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-reference-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-reference-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-reference-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Credits - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;9424600">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_4_management.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Credits</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="gnu_fdl.txt">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>12. Credits</H1>
-<P><B>Authors</B></P>
-<P>Geeqie is maintained by John Ellis.</P>
-<P>The ever growing list of contributors and language translators can
-be found in the README file included with the latest release of the
-program. The Credits can also be viewed by selecting the Credits
-button located in the About dialog <I>(open Help Menu, select About,
-click Credits... button)</I>.</P>
-<P><BR><BR>
-</P>
-<P><B>Copyright</B></P>
-<P>Geeqie and this accompanying documentation is copyright <FONT FACE="Nimbus Roman No9 L">©</FONT>
-2006 John Ellis.</P>
-<P><BR><BR>
-</P>
-<P><B>License</B></P>
-<P>The Geeqie program is released under the “GNU General Public
-License”, the complete GNU GPL text can be found in the COPYING
-file included with each Geeqie release.</P>
-<P>This Geeqie documentation is released under the "<A HREF="gnu_fdl.txt">GNU
-Free Documentation License</A>".</P>
-<P><BR><BR>
-</P>
-<P><B>Legal Notice</B></P>
-<P>Copyright <FONT FACE="Nimbus Roman No9 L">©</FONT> 2006 John
-Ellis.</P>
-<P>Permission is granted to copy, distribute and/or modify this
-document under the terms of the GNU Free Documentation License,
-Version 1.2 or any later version published by the Free Software
-Foundation; with no Invariant Sections, no Front-Cover Texts, and no
-Back-Cover Texts. A copy of the license is included in the section
-entitled "<A HREF="gnu_fdl.txt">GNU Free Documentation License</A>".</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="11_4_management.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="gnu_fdl.txt">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Credits - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;9424600" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-credits-7 {margin-bottom: 0in}
+ span.gq-credits-6 {font-family: Nimbus Roman No9 L}
+ p.gq-credits-5 {font-weight: bold}
+ div.gq-credits-4 {text-align: center}
+ table.gq-credits-3 {page-break-before: always}
+ p.gq-credits-2 {text-align: right}
+ p.gq-credits-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-credits-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-credits-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_4_management.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-credits-1">Credits</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-credits-2"><a href="gnu_fdl.txt">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>12. Credits</h1>
+
+ <p class="gq-credits-5">Authors</p>
+
+ <p>Geeqie is maintained by John Ellis.</p>
+
+ <p>The ever growing list of contributors and language translators can be found in the README file included with the latest release of the program. The Credits can also be viewed by selecting the Credits button located in the About dialog <i>(open Help Menu, select About, click Credits... button)</i>.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-credits-5">Copyright</p>
+
+ <p>Geeqie and this accompanying documentation is copyright <span class="gq-credits-6">©</span> 2006 John Ellis.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-credits-5">License</p>
+
+ <p>The Geeqie program is released under the “GNU General Public License”, the complete GNU GPL text can be found in the COPYING file included with each Geeqie release.</p>
+
+ <p>This Geeqie documentation is released under the "<a href="gnu_fdl.txt">GNU Free Documentation License</a>".</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-credits-5">Legal Notice</p>
+
+ <p>Copyright <span class="gq-credits-6">©</span> 2006 John Ellis.</p>
+
+ <p>Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled "<a href="gnu_fdl.txt">GNU Free Documentation License</a>".</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-credits-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="11_4_management.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-credits-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-credits-2"><a href="gnu_fdl.txt">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-credits-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-credits-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-credits-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Introduction - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040822;10262400">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="index.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>1. Introduction</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_main_window.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<P><B>Legal Notice</B></P>
-<P>Copyright <FONT FACE="Nimbus Roman No9 L">©</FONT> 2004 John
-Ellis.</P>
-<P>Permission is granted to copy, distribute and/or modify this
-document under the terms of the GNU Free Documentation License,
-Version 1.2 or any later version published by the Free Software
-Foundation; with no Invariant Sections, no Front-Cover Texts, and no
-Back-Cover Texts. A copy of the license is included in the section
-entitled "<A HREF="gnu_fdl.txt">GNU Free Documentation License</A>".</P>
-<P><BR><BR>
-</P>
-<H1>1. Introduction</H1>
-<P>Geeqie is an image viewer, that makes navigation of images easy.
-Images can be viewed full screen, and a slide show function allows
-automatic changing of the displayed image.</P>
-<P>Geeqie is an image manager, with complete copy, move, rename, and
-delete functions available at the press of a button. Find the right
-image with the search feature. Image collectors can free up space
-with a function that finds duplicate images.</P>
-<P><BR><BR>
-</P>
-<P>The one thing Geeqie is not, and never be, is an image editor.
-However, Geeqie paired with an image editor, such as the Gimp, can be
-a very powerful combination.</P>
-<P><BR><BR>
-</P>
-<P><B>Basic Features</B></P>
-<UL>
- <LI><P STYLE="font-weight: medium">Thumbnail preview</P>
- <LI><P STYLE="font-weight: medium">Full screen</P>
- <LI><P STYLE="font-weight: medium">Slide show</P>
- <LI><P STYLE="font-weight: medium">Image Management</P>
- <LI><P STYLE="font-weight: medium">Image Collections</P>
-</UL>
-<P><B>Advanced Features</B></P>
-<UL>
- <LI><P STYLE="font-weight: medium">Image Search</P>
- <LI><P STYLE="font-weight: medium">Find image duplicates based on
- image content</P>
- <LI><P STYLE="font-weight: medium">View EXIF data stored in images</P>
- <LI><P STYLE="font-weight: medium">Simple Sort Manager to quickly
- sort a folder of images into other folders</P>
- <LI><P STYLE="font-weight: medium">Rename images in bulk</P>
- <LI><P STYLE="font-weight: medium">Add keywords to images, and
- recall those images with the search function</P>
- <LI><P STYLE="font-weight: medium">Very Configurable</P>
-</UL>
-<P><BR><BR>
-</P>
-<P>“An application that displays images.” - This was, and
-still is, the primary goal of Geeqie. Over time image management
-features have been added, but the core purpose of Geeqie remains the
-same.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="index.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_main_window.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Introduction - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040822;10262400" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-introduction-8 {margin-bottom: 0in}
+ p.gq-introduction-7 {font-weight: medium}
+ span.gq-introduction-6 {font-family: Nimbus Roman No9 L}
+ p.gq-introduction-5 {font-weight: bold}
+ div.gq-introduction-4 {text-align: center}
+ table.gq-introduction-3 {page-break-before: always}
+ p.gq-introduction-2 {text-align: right}
+ p.gq-introduction-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-introduction-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-introduction-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="index.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-introduction-1">1. Introduction</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-introduction-2"><a href="2_main_window.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <p class="gq-introduction-5">Legal Notice</p>
+
+ <p>Copyright <span class="gq-introduction-6">©</span> 2004 John Ellis.</p>
+
+ <p>Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled "<a href="gnu_fdl.txt">GNU Free Documentation License</a>".</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <h1>1. Introduction</h1>
+
+ <p>Geeqie is an image viewer, that makes navigation of images easy. Images can be viewed full screen, and a slide show function allows automatic changing of the displayed image.</p>
+
+ <p>Geeqie is an image manager, with complete copy, move, rename, and delete functions available at the press of a button. Find the right image with the search feature. Image collectors can free up space with a function that finds duplicate images.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>The one thing Geeqie is not, and never be, is an image editor. However, Geeqie paired with an image editor, such as the Gimp, can be a very powerful combination.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-introduction-5">Basic Features</p>
+
+ <ul>
+ <li>
+ <p class="gq-introduction-7">Thumbnail preview</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Full screen</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Slide show</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Image Management</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Image Collections</p>
+ </li>
+ </ul>
+
+ <p class="gq-introduction-5">Advanced Features</p>
+
+ <ul>
+ <li>
+ <p class="gq-introduction-7">Image Search</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Find image duplicates based on image content</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">View EXIF data stored in images</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Simple Sort Manager to quickly sort a folder of images into other folders</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Rename images in bulk</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Add keywords to images, and recall those images with the search function</p>
+ </li>
+
+ <li>
+ <p class="gq-introduction-7">Very Configurable</p>
+ </li>
+ </ul>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>“An application that displays images.” - This was, and still is, the primary goal of Geeqie. Over time image management features have been added, but the core purpose of Geeqie remains the same.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-introduction-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="index.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-introduction-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-introduction-2"><a href="2_main_window.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-introduction-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-introduction-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-introduction-8"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Navigation - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040930;15594600">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_main_window.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Navigation – Main Window</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_2_menus.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>2.1 Navigation</H1>
-<P><B>Moving around in the file system</B></P>
-<P STYLE="margin-left: 0.79in">To select the folder containing the
-desired images for display, change to the image's folder using the
-folder view. Single clicking a folder with the primary mouse button
-will change the main window to display that folder's contents. When
-the folder view is displayed as a list, use the folder named “..”
-to change to the parent folder (the parent folder is the folder that
-contains the current folder).</P>
-<P STYLE="margin-left: 0.79in">To select a folder with the keyboard,
-move the focus to the desired folder and press the Space or Enter
-key.</P>
-<P><B>Moving around within a folder</B></P>
-<P STYLE="margin-left: 0.79in">After selecting the desired folder as
-above, the desired image can be viewed by selecting it from the file
-list. To select a file for display single click it with the primary
-mouse button.</P>
-<P STYLE="margin-left: 0.79in">To select a file with the keyboard,
-move the focus to the desired file. As you move the focus within the
-file list the image display will update to match the highlighted
-file.</P>
-<P><B>Going home</B></P>
-<P STYLE="margin-left: 0.79in">To change to your home folder, click
-the Home button in the tool bar.</P>
-<P><B>Direct path entry</B></P>
-<P STYLE="margin-left: 0.79in">The current path is displayed in an
-entry field above the folder list. A folder or file can be typed into
-the entry to quickly change to a desired location or image, the main
-window will update after pressing the Enter key. Tab completion is
-also available in the path entry.</P>
-<P STYLE="margin-left: 0.79in">Next to the path entry is a button
-with a down arrow, clicking this will display a drop down list
-containing the most recent locations viewed. The list is ordered such
-that the most recent location is at the top. Selecting a location
-from the drop down list will change the window to display the
-location.</P>
-<P><B>Stepping through images sequentially</B></P>
-<P STYLE="margin-left: 0.79in">To change the displayed image to next
-or previous one within the same folder, use the respective PageDown
-and PageUp keys. The mouse can also be used to change the image by
-clicking the image display with the respective primary and middle
-buttons.</P>
-<P STYLE="margin-left: 0.79in">To change to beginning or end of the
-image list, use the respective Home or End keys.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_main_window.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_2_menus.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Navigation - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040930;15594600" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-navigation-7 {margin-bottom: 0in}
+ p.gq-navigation-6 {margin-left: 0.79in}
+ p.gq-navigation-5 {font-weight: bold}
+ div.gq-navigation-4 {text-align: center}
+ table.gq-navigation-3 {page-break-before: always}
+ p.gq-navigation-2 {text-align: right}
+ p.gq-navigation-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-navigation-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-navigation-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_main_window.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-navigation-1">Navigation – Main Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-navigation-2"><a href="2_2_menus.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>2.1 Navigation</h1>
+
+ <p class="gq-navigation-5">Moving around in the file system</p>
+
+ <p class="gq-navigation-6">To select the folder containing the desired images for display, change to the image's folder using the folder view. Single clicking a folder with the primary mouse button will change the main window to display that folder's contents. When the folder view is displayed as a list, use the folder named “..” to change to the parent folder (the parent folder is the folder that contains the current folder).</p>
+
+ <p class="gq-navigation-6">To select a folder with the keyboard, move the focus to the desired folder and press the Space or Enter key.</p>
+
+ <p class="gq-navigation-5">Moving around within a folder</p>
+
+ <p class="gq-navigation-6">After selecting the desired folder as above, the desired image can be viewed by selecting it from the file list. To select a file for display single click it with the primary mouse button.</p>
+
+ <p class="gq-navigation-6">To select a file with the keyboard, move the focus to the desired file. As you move the focus within the file list the image display will update to match the highlighted file.</p>
+
+ <p class="gq-navigation-5">Going home</p>
+
+ <p class="gq-navigation-6">To change to your home folder, click the Home button in the tool bar.</p>
+
+ <p class="gq-navigation-5">Direct path entry</p>
+
+ <p class="gq-navigation-6">The current path is displayed in an entry field above the folder list. A folder or file can be typed into the entry to quickly change to a desired location or image, the main window will update after pressing the Enter key. Tab completion is also available in the path entry.</p>
+
+ <p class="gq-navigation-6">Next to the path entry is a button with a down arrow, clicking this will display a drop down list containing the most recent locations viewed. The list is ordered such that the most recent location is at the top. Selecting a location from the drop down list will change the window to display the location.</p>
+
+ <p class="gq-navigation-5">Stepping through images sequentially</p>
+
+ <p class="gq-navigation-6">To change the displayed image to next or previous one within the same folder, use the respective PageDown and PageUp keys. The mouse can also be used to change the image by clicking the image display with the respective primary and middle buttons.</p>
+
+ <p class="gq-navigation-6">To change to beginning or end of the image list, use the respective Home or End keys.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-navigation-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_main_window.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-navigation-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-navigation-2"><a href="2_2_menus.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-navigation-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-navigation-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-navigation-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Menus - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;8375900">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_1_navigation.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Menus – Main Window</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_3_layout.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>2.2 Menus</H1>
-<P>This section describes the functions of each item on the menu bar
-in the Geeqie main window.</P>
-<P><BR><BR>
-</P>
-<P><U>File Menu</U></P>
-<P STYLE="margin-left: 0.79in"><B>New window</B>: Opens a new main
-window, with the initial path set to the current folder.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>New
-collection</B>: Opens a new collection window, the new collection
-will be empty.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Open
-collection</B>: Displays a dialog to open a collection stored on
-disk, the selected collection will then appear in a new window.</P>
-<P STYLE="margin-left: 0.79in"><B>Open recent</B>: This menu item
-lists the recently active collections, selecting an item from the
-list will open that collection in a new window. The most recent item
-will appear at the top of the list.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Search...</B>:
-Opens a new Search window.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Find
-duplicates...</B>: Opens a new Find Duplicates window.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Print..</B>:
-Opens a print dialog.</P>
-<P STYLE="margin-left: 0.79in"><B>New folder...</B>: Creates a new
-folder in the current path.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Copy...</B>:
-Opens a dialog to select a destination to copy the currently selected
-files.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Move...</B>:
-Opens a dialog to select a destination to move currently selected
-files.</P>
-<P STYLE="margin-left: 0.79in"><B>Rename...</B>: Renames the current
-file selection.</P>
-<P STYLE="margin-left: 0.79in"><B>Delete...</B>: Deletes the current
-file selection.</P>
-<P STYLE="margin-left: 0.79in"><B>Close window</B>: Closes the window
-containing the menu, if the window is the last main window Geeqie
-will quit.</P>
-<P STYLE="margin-left: 0.79in"><B>Quit</B>: Quits the Geeqie
-application, if collections have been changed but not saved, the user
-will be prompted for confirmation.</P>
-<P><U>Edit menu</U></P>
-<P STYLE="margin-left: 0.79in"><B>in <command name>...</B>:
-This will execute the external command associated with <command
-name>, these can be changed edited on the <A HREF="10_5_editor_commands.html">Editors
-tab</A> of the Option dialog.</P>
-<P STYLE="margin-left: 0.79in"><B>Adjust</B> sub menu:</P>
-<P STYLE="margin-left: 1.58in"><B>Rotate clockwise</B>: Rotates the
-current image clockwise 90 degrees, does not effect the file on disk.</P>
-<P STYLE="margin-left: 1.58in"><B>Rotate counterclockwise</B>:
-Rotates the current image counterclockwise 90 degrees, does not
-effect the file on disk.</P>
-<P STYLE="margin-left: 1.58in"><B>Rotate 180</B>: Rotates the current
-image 180 degrees, does not effect the file on disk.</P>
-<P STYLE="margin-left: 1.58in"><B>Mirror</B>: Swaps the left and
-right sides of the image so that the result is similar to that of
-looking at the image in a mirror, does not effect the file on disk.</P>
-<P STYLE="margin-left: 1.58in"><B>Flip</B>: Swaps the top and bottom
-sides of the image, does not effect the file on disk.</P>
-<P STYLE="margin-left: 0.79in"><B>Properties</B>: Opens a Properties
-Window for the currently selected files.</P>
-<P STYLE="margin-left: 0.79in"><B>Select all</B>: Selects all files
-displayed in the file list.</P>
-<P STYLE="margin-left: 0.79in"><B>Select none</B>: Clears the current
-file selection.</P>
-<P STYLE="margin-left: 0.79in"><B>Preferences...</B>: Opens the
-<A HREF="10_options.html">Preferences Dialog</A> for changing of user
-preferences.</P>
-<P STYLE="margin-left: 0.79in"><B>Thumbnail maintenance</B>: Opens a
-dialog with utilities to manage cached thumbnails and keywords data.</P>
-<P STYLE="margin-left: 0.79in"><B>Set as wallpaper</B>: Renders the
-current image to the root window (desktop). The resulting image will
-be tiled to fit the root window if zoom is not set to <U>fit to
-window</U>; when zoom is set to <U>fit to window</U>, the image will
-be scaled to fill the root window.</P>
-<P><U>View menu</U></P>
-<P STYLE="margin-left: 0.79in"><B>Zoom in</B>: Increases the zoom by
-one increment, resulting in a larger image.</P>
-<P STYLE="margin-left: 0.79in"><B>Zoom out</B>: Decreases the zoom by
-one increment, resulting in a smaller image.</P>
-<P STYLE="margin-left: 0.79in"><B>Zoom 1:1</B>: Resets the zoom to
-the original size of the image.</P>
-<P STYLE="margin-left: 0.79in"><B>Zoom to fit</B>: Automatically
-adjusts the zoom so that the image will fit within the display pane.
-The effect on images with an original size smaller than the display
-pane can be changed with the <U>Allow enlargement of image for zoom
-to fit</U><SPAN STYLE="text-decoration: none"> option located on the
-<A HREF="10_2_image.html">Image tab</A> of the preferences dialog</SPAN>.</P>
-<P STYLE="margin-left: 0.79in"><B>Thumbnails</B>: Toggles the display
-of image thumbnails in the file list, this item is not available when
-the file list is in icon view mode. A check appears next to this item
-when thumbnails are enabled.</P>
-<P STYLE="margin-left: 0.79in"><B>List</B>: Changes the file list to
-display files in list format.</P>
-<P STYLE="margin-left: 0.79in"><B>Icons</B>: Changes the file list to
-display files as icons.</P>
-<P STYLE="margin-left: 0.79in"><B>Tree</B>: Toggles the folder list
-between simple and tree modes. A check appears next to this item when
-the folder is in tree mode.</P>
-<P STYLE="margin-left: 0.79in"><B>Full screen</B>: Toggles the full
-screen window display.</P>
-<P STYLE="margin-left: 0.79in"><B>Float file list</B>: Toggles the
-location of the menu bar, tool bar, status bar, and file lists
-between the main window and a second window. A check appears next to
-this item when the location is the second window.</P>
-<P STYLE="margin-left: 0.79in"><B>Hide file list</B>: Toggles
-visibility of the menu bar, tool bar, status bar, and file lists.</P>
-<P STYLE="margin-left: 0.79in"><B>Hide toolbar</B>: Toggles
-visibility of the tool bar. A check appears next to this item when
-the tool bar is not visible.</P>
-<P STYLE="margin-left: 0.79in"><B>Keywords</B>: Toggles display of
-the Keywords sidebar.</P>
-<P STYLE="margin-left: 0.79in"><B>Exif data</B>: Toggles display of
-the EXIF sidebar.</P>
-<P STYLE="margin-left: 0.79in"><B>Sort manager</B>: Toggles display
-of the Sort Manager sidebar.</P>
-<P STYLE="margin-left: 0.79in"><B>Toggle slideshow</B>: Begins or
-ends a slide show, the slide show status is displayed in the status
-bar.</P>
-<P STYLE="margin-left: 0.79in"><B>Refresh</B>: Updates the contents
-of the folder and file lists to match what is currently on disk, the
-current image will also be reread from disk.</P>
-<P><U>Help menu</U></P>
-<P STYLE="margin-left: 0.79in"><B>Contents</B>: Open the Geeqie user
-manual in a new browser window.</P>
-<P STYLE="margin-left: 0.79in"><B>Keyboard shortcuts</B>: Displays a
-window listing the default keyboard shortcuts.</P>
-<P STYLE="margin-left: 0.79in"><B>Release notes</B>: Displays a
-window containing the release notes for the version of Geeqie in use.</P>
-<P STYLE="margin-left: 0.79in"><B>About</B>: Opens a window
-containing the Geeqie version, credits, website, and email contact
-information.</P>
-<P><BR><BR>
-</P>
-<P><U>Tear off menus</U></P>
-<P>Menus can be permanently displayed by selecting the dotted line
-item at the top of each menu category. A tear off menu will behave
-the same as an ordinary window. To close a tear off menu, select the
-dotted line item at the top of the menu.</P>
-<P><BR><BR>
-</P>
-<P><U>Keyboard shortcuts</U></P>
-<P>The keyboard sequence associated to each menu entry is listed
-within the main window menu bar. For reference, the complete list of
-default keyboard shortcuts can be found in section <A HREF="11_2_keyboard_shortcuts.html">11.2
-Keyboard Shortcuts</A>.</P>
-<P><BR><BR>
-</P>
-<P><U>Changing the main window menu bar keyboard shortcuts</U></P>
-<P STYLE="text-decoration: none">The keyboard shortcuts associated
-with the menu bar items can be changed by editing the accels file
-located in the Geeqie configuration folder <B>while the Geeqie
-application is not running</B>:</P>
-<P STYLE="margin-left: 0.79in"><CODE><SPAN STYLE="text-decoration: none">($HOME)/.geeqie/accels</SPAN></CODE></P>
-<P><SPAN STYLE="text-decoration: none">To change a menu item, first
-find the line corresponding to the menu item</SPAN> to change. For
-example the File menu Quit line originally looks like this:</P>
-<P STYLE="margin-left: 0.79in"><CODE><SPAN STYLE="text-decoration: none">;
-(gtk_accel_path "<main>/File/Quit" "<Control>q")</SPAN></CODE></P>
-<P STYLE="text-decoration: none">To change this menu's keyboard
-shortcut, first remove the leading semicolon (;), removing the
-semicolon will tell Geeqie that this menu item has been customized.
-Then change the keyboard shortcut defined by the text in quotes at
-the end of the line, be sure to only change the text within the
-quotes; in this case the text “<control>q”. For
-example changing the shortcut associated with Quit to the Q key will
-result in this line:</P>
-<P STYLE="margin-left: 0.79in"><CODE><SPAN STYLE="text-decoration: none">(gtk_accel_path
-"<main>/File/Quit" "q")</SPAN></CODE></P>
-<P STYLE="text-decoration: none">Please note the removed semicolon
-and the change of “<control>q” to “q”,
-be careful not to change any of the other text on the line or Geeqie
-may ignore the customization. The keyboard modifiers and their
-respective text are listed below:</P>
-<DL>
- <DL>
- <DD>
- <TABLE WIDTH=60% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=128*>
- <COL WIDTH=128*>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P ALIGN=CENTER><B>Key</B></P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER><B>Text to use in accels file</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>[Shift]</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER><shift></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>[Control]</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER><control></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>[Alt]</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER><alt></P>
- </TD>
- </TR>
- </TABLE>
- </DL>
-</DL>
-<P><BR><BR>
-</P>
-<P>Modifiers can be combined, for example in the exit line above, the
-text would be “<control><shift>q” to set the
-exit shortcut to [Control] + [Shift] + Q.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_1_navigation.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_3_layout.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Menus - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;8375900" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-menus-11 {margin-bottom: 0in}
+ p.gq-menus-10 {font-weight: bold; text-align: center}
+ p.gq-menus-9 {text-decoration: none}
+ span.gq-menus-8 {text-decoration: none}
+ p.gq-menus-7 {margin-left: 1.58in}
+ p.gq-menus-6 {margin-left: 0.79in; font-weight: medium}
+ p.gq-menus-5 {margin-left: 0.79in}
+ div.gq-menus-4 {text-align: center}
+ table.gq-menus-3 {page-break-before: always}
+ p.gq-menus-2 {text-align: right}
+ p.gq-menus-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-menus-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-menus-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_1_navigation.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-menus-1">Menus – Main Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-menus-2"><a href="2_3_layout.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>2.2 Menus</h1>
+
+ <p>This section describes the functions of each item on the menu bar in the Geeqie main window.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>File Menu</u>
+ </p>
+
+ <p class="gq-menus-5"><b>New window</b>: Opens a new main window, with the initial path set to the current folder.</p>
+
+ <p class="gq-menus-6"><b>New collection</b>: Opens a new collection window, the new collection will be empty.</p>
+
+ <p class="gq-menus-6"><b>Open collection</b>: Displays a dialog to open a collection stored on disk, the selected collection will then appear in a new window.</p>
+
+ <p class="gq-menus-5"><b>Open recent</b>: This menu item lists the recently active collections, selecting an item from the list will open that collection in a new window. The most recent item will appear at the top of the list.</p>
+
+ <p class="gq-menus-6"><b>Search...</b>: Opens a new Search window.</p>
+
+ <p class="gq-menus-6"><b>Find duplicates...</b>: Opens a new Find Duplicates window.</p>
+
+ <p class="gq-menus-6"><b>Print..</b>: Opens a print dialog.</p>
+
+ <p class="gq-menus-5"><b>New folder...</b>: Creates a new folder in the current path.</p>
+
+ <p class="gq-menus-6"><b>Copy...</b>: Opens a dialog to select a destination to copy the currently selected files.</p>
+
+ <p class="gq-menus-6"><b>Move...</b>: Opens a dialog to select a destination to move currently selected files.</p>
+
+ <p class="gq-menus-5"><b>Rename...</b>: Renames the current file selection.</p>
+
+ <p class="gq-menus-5"><b>Delete...</b>: Deletes the current file selection.</p>
+
+ <p class="gq-menus-5"><b>Close window</b>: Closes the window containing the menu, if the window is the last main window Geeqie will quit.</p>
+
+ <p class="gq-menus-5"><b>Quit</b>: Quits the Geeqie application, if collections have been changed but not saved, the user will be prompted for confirmation.</p>
+
+ <p><u>Edit menu</u>
+ </p>
+
+ <p class="gq-menus-5"><b>in <command name>...</b>: This will execute the external command associated with <command name>, these can be changed edited on the <a href="10_5_editor_commands.html">Editors tab</a> of the Option dialog.</p>
+
+ <p class="gq-menus-5"><b>Adjust</b> sub menu:</p>
+
+ <p class="gq-menus-7"><b>Rotate clockwise</b>: Rotates the current image clockwise 90 degrees, does not effect the file on disk.</p>
+
+ <p class="gq-menus-7"><b>Rotate counterclockwise</b>: Rotates the current image counterclockwise 90 degrees, does not effect the file on disk.</p>
+
+ <p class="gq-menus-7"><b>Rotate 180</b>: Rotates the current image 180 degrees, does not effect the file on disk.</p>
+
+ <p class="gq-menus-7"><b>Mirror</b>: Swaps the left and right sides of the image so that the result is similar to that of looking at the image in a mirror, does not effect the file on disk.</p>
+
+ <p class="gq-menus-7"><b>Flip</b>: Swaps the top and bottom sides of the image, does not effect the file on disk.</p>
+
+ <p class="gq-menus-5"><b>Properties</b>: Opens a Properties Window for the currently selected files.</p>
+
+ <p class="gq-menus-5"><b>Select all</b>: Selects all files displayed in the file list.</p>
+
+ <p class="gq-menus-5"><b>Select none</b>: Clears the current file selection.</p>
+
+ <p class="gq-menus-5"><b>Preferences...</b>: Opens the <a href="10_options.html">Preferences Dialog</a> for changing of user preferences.</p>
+
+ <p class="gq-menus-5"><b>Thumbnail maintenance</b>: Opens a dialog with utilities to manage cached thumbnails and keywords data.</p>
+
+ <p class="gq-menus-5"><b>Set as wallpaper</b>: Renders the current image to the root window (desktop). The resulting image will be tiled to fit the root window if zoom is not set to <u>fit to window</u>; when zoom is set to <u>fit to window</u>, the image will be scaled to fill the root window.</p>
+
+ <p><u>View menu</u>
+ </p>
+
+ <p class="gq-menus-5"><b>Zoom in</b>: Increases the zoom by one increment, resulting in a larger image.</p>
+
+ <p class="gq-menus-5"><b>Zoom out</b>: Decreases the zoom by one increment, resulting in a smaller image.</p>
+
+ <p class="gq-menus-5"><b>Zoom 1:1</b>: Resets the zoom to the original size of the image.</p>
+
+ <p class="gq-menus-5"><b>Zoom to fit</b>: Automatically adjusts the zoom so that the image will fit within the display pane. The effect on images with an original size smaller than the display pane can be changed with the <u>Allow enlargement of image for zoom to fit</u> <span class="gq-menus-8">option located on the <a href="10_2_image.html">Image tab</a> of the preferences dialog</span>.</p>
+
+ <p class="gq-menus-5"><b>Thumbnails</b>: Toggles the display of image thumbnails in the file list, this item is not available when the file list is in icon view mode. A check appears next to this item when thumbnails are enabled.</p>
+
+ <p class="gq-menus-5"><b>List</b>: Changes the file list to display files in list format.</p>
+
+ <p class="gq-menus-5"><b>Icons</b>: Changes the file list to display files as icons.</p>
+
+ <p class="gq-menus-5"><b>Tree</b>: Toggles the folder list between simple and tree modes. A check appears next to this item when the folder is in tree mode.</p>
+
+ <p class="gq-menus-5"><b>Full screen</b>: Toggles the full screen window display.</p>
+
+ <p class="gq-menus-5"><b>Float file list</b>: Toggles the location of the menu bar, tool bar, status bar, and file lists between the main window and a second window. A check appears next to this item when the location is the second window.</p>
+
+ <p class="gq-menus-5"><b>Hide file list</b>: Toggles visibility of the menu bar, tool bar, status bar, and file lists.</p>
+
+ <p class="gq-menus-5"><b>Hide toolbar</b>: Toggles visibility of the tool bar. A check appears next to this item when the tool bar is not visible.</p>
+
+ <p class="gq-menus-5"><b>Keywords</b>: Toggles display of the Keywords sidebar.</p>
+
+ <p class="gq-menus-5"><b>Exif data</b>: Toggles display of the EXIF sidebar.</p>
+
+ <p class="gq-menus-5"><b>Sort manager</b>: Toggles display of the Sort Manager sidebar.</p>
+
+ <p class="gq-menus-5"><b>Toggle slideshow</b>: Begins or ends a slide show, the slide show status is displayed in the status bar.</p>
+
+ <p class="gq-menus-5"><b>Refresh</b>: Updates the contents of the folder and file lists to match what is currently on disk, the current image will also be reread from disk.</p>
+
+ <p><u>Help menu</u>
+ </p>
+
+ <p class="gq-menus-5"><b>Contents</b>: Open the Geeqie user manual in a new browser window.</p>
+
+ <p class="gq-menus-5"><b>Keyboard shortcuts</b>: Displays a window listing the default keyboard shortcuts.</p>
+
+ <p class="gq-menus-5"><b>Release notes</b>: Displays a window containing the release notes for the version of Geeqie in use.</p>
+
+ <p class="gq-menus-5"><b>About</b>: Opens a window containing the Geeqie version, credits, website, and email contact information.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Tear off menus</u>
+ </p>
+
+ <p>Menus can be permanently displayed by selecting the dotted line item at the top of each menu category. A tear off menu will behave the same as an ordinary window. To close a tear off menu, select the dotted line item at the top of the menu.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Keyboard shortcuts</u>
+ </p>
+
+ <p>The keyboard sequence associated to each menu entry is listed within the main window menu bar. For reference, the complete list of default keyboard shortcuts can be found in section <a href="11_2_keyboard_shortcuts.html">11.2 Keyboard Shortcuts</a>.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Changing the main window menu bar keyboard shortcuts</u>
+ </p>
+
+ <p class="gq-menus-9">The keyboard shortcuts associated with the menu bar items can be changed by editing the accels file located in the Geeqie configuration folder <b>while the Geeqie application is not running</b>:</p>
+
+ <p class="gq-menus-5"><code><span class="gq-menus-8">($HOME)/.geeqie/accels</span></code>
+ </p>
+
+ <p><span class="gq-menus-8">To change a menu item, first find the line corresponding to the menu item</span> to change. For example the File menu Quit line originally looks like this:</p>
+
+ <p class="gq-menus-5"><code><span class="gq-menus-8">; (gtk_accel_path "<main>/File/Quit" "<Control>q")</span></code>
+ </p>
+
+ <p class="gq-menus-9">To change this menu's keyboard shortcut, first remove the leading semicolon (;), removing the semicolon will tell Geeqie that this menu item has been customized. Then change the keyboard shortcut defined by the text in quotes at the end of the line, be sure to only change the text within the quotes; in this case the text “<control>q”. For example changing the shortcut associated with Quit to the Q key will result in this line:</p>
+
+ <p class="gq-menus-5"><code><span class="gq-menus-8">(gtk_accel_path "<main>/File/Quit" "q")</span></code>
+ </p>
+
+ <p class="gq-menus-9">Please note the removed semicolon and the change of “<control>q” to “q”, be careful not to change any of the other text on the line or Geeqie may ignore the customization. The keyboard modifiers and their respective text are listed below:</p>
+
+ <dl>
+ <dd>
+ <dl>
+ <dd>
+ <table width="60%" border="0" cellpadding="4" cellspacing="0">
+ <col width="128*" />
+ <col width="128*" />
+
+ <tr valign="top">
+ <td width="50%">
+ <p class="gq-menus-10">Key</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-menus-10">Text to use in accels file</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p class="gq-menus-1">[Shift]</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-menus-1"><shift></p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p class="gq-menus-1">[Control]</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-menus-1"><control></p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p class="gq-menus-1">[Alt]</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-menus-1"><alt></p>
+ </td>
+ </tr>
+ </table>
+ </dd>
+ </dl>
+ </dd>
+ </dl>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>Modifiers can be combined, for example in the exit line above, the text would be “<control><shift>q” to set the exit shortcut to [Control] + [Shift] + Q.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-menus-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_1_navigation.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-menus-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-menus-2"><a href="2_3_layout.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-menus-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-menus-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-menus-11"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Layout - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040930;21160600">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_2_menus.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Layout – Main Window</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_4_file_pane.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>2.3 Layout</H1>
-<P>The main window consists of four areas, the <A HREF="2_5_folder_pane.html">folder
-pane</A>, <A HREF="2_4_file_pane.html">file pane</A>, <A HREF="2_6_image_pane.html">image
-pane</A>, and the <A HREF="2_7_status_bar.html">status bar</A>. The
-status bar is always at the bottom of the window. The three remaining
-areas, or panes, can be arranged and sized by the user.</P>
-<P><U>Selecting the location of each pane</U></P>
-<P STYLE="margin-left: 0.79in">The arrangement of the folder, file,
-and image pane is selected on the <A HREF="10_3_window.html">Windows
-tab</A> of the Options window. There are four choices for the layout,
-the difference is that each has the larger pane in a different
-location: right, bottom, left, and top.</P>
-<P STYLE="margin-left: 0.79in">The order in which the panes are
-filled is determined by the three row list located below the layout
-selection. The three numbered rows correspond to the three numbered
-regions of the selected layout, to change the order of the list drag
-a row to the desired location within the list. To drag a row move the
-mouse over the selected row, press and hold the primary mouse button,
-then drag the row to the desired location and release the button.</P>
-<P STYLE="margin-left: 0.79in; text-decoration: none"><I>Note: In the
-options window the file and image panes are labeled similarly,
-however the folder pane is labeled as tools.</I></P>
-<P><U>Changing the size of a pane</U></P>
-<P STYLE="margin-left: 0.79in">Between the panes of the main window
-are two dividers that can be moved with the mouse to adjust the size
-of each pane. Press and hold the primary button, then move the
-divider to the desired location and release the button.</P>
-<P><B>Folder pane</B></P>
-<P STYLE="margin-left: 0.79in">The <A HREF="2_5_folder_pane.html">folder
-pane</A> contains the menu bar, tool bar, path entry, and folder
-list. The list can be set to display the sub folders of the active
-folder or a tree that starts with the root folder and contains all
-folders in the file system.</P>
-<P><B>File pane</B></P>
-<P STYLE="margin-left: 0.79in">The <A HREF="2_4_file_pane.html">file
-pane</A> lists the images contained in the active folder. The file
-pane can be set to display as a vertical list or an icon view.</P>
-<P><B>Image pane</B></P>
-<P STYLE="margin-left: 0.79in">The <A HREF="2_6_image_pane.html">image
-pane</A> is where the active image is displayed.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_2_menus.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_4_file_pane.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Layout - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040930;21160600" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-layout-8 {margin-bottom: 0in}
+ p.gq-layout-7 {font-weight: bold}
+ p.gq-layout-6 {font-style: italic; margin-left: 0.79in; text-decoration: none}
+ p.gq-layout-5 {margin-left: 0.79in}
+ div.gq-layout-4 {text-align: center}
+ table.gq-layout-3 {page-break-before: always}
+ p.gq-layout-2 {text-align: right}
+ p.gq-layout-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-layout-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-layout-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_2_menus.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-layout-1">Layout – Main Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-layout-2"><a href="2_4_file_pane.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>2.3 Layout</h1>
+
+ <p>The main window consists of four areas, the <a href="2_5_folder_pane.html">folder pane</a>, <a href="2_4_file_pane.html">file pane</a>, <a href="2_6_image_pane.html">image pane</a>, and the <a href="2_7_status_bar.html">status bar</a>. The status bar is always at the bottom of the window. The three remaining areas, or panes, can be arranged and sized by the user.</p>
+
+ <p><u>Selecting the location of each pane</u>
+ </p>
+
+ <p class="gq-layout-5">The arrangement of the folder, file, and image pane is selected on the <a href="10_3_window.html">Windows tab</a> of the Options window. There are four choices for the layout, the difference is that each has the larger pane in a different location: right, bottom, left, and top.</p>
+
+ <p class="gq-layout-5">The order in which the panes are filled is determined by the three row list located below the layout selection. The three numbered rows correspond to the three numbered regions of the selected layout, to change the order of the list drag a row to the desired location within the list. To drag a row move the mouse over the selected row, press and hold the primary mouse button, then drag the row to the desired location and release the button.</p>
+
+ <p class="gq-layout-6">Note: In the options window the file and image panes are labeled similarly, however the folder pane is labeled as tools.</p>
+
+ <p><u>Changing the size of a pane</u>
+ </p>
+
+ <p class="gq-layout-5">Between the panes of the main window are two dividers that can be moved with the mouse to adjust the size of each pane. Press and hold the primary button, then move the divider to the desired location and release the button.</p>
+
+ <p class="gq-layout-7">Folder pane</p>
+
+ <p class="gq-layout-5">The <a href="2_5_folder_pane.html">folder pane</a> contains the menu bar, tool bar, path entry, and folder list. The list can be set to display the sub folders of the active folder or a tree that starts with the root folder and contains all folders in the file system.</p>
+
+ <p class="gq-layout-7">File pane</p>
+
+ <p class="gq-layout-5">The <a href="2_4_file_pane.html">file pane</a> lists the images contained in the active folder. The file pane can be set to display as a vertical list or an icon view.</p>
+
+ <p class="gq-layout-7">Image pane</p>
+
+ <p class="gq-layout-5">The <a href="2_6_image_pane.html">image pane</a> is where the active image is displayed.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-layout-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_2_menus.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-layout-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-layout-2"><a href="2_4_file_pane.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-layout-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-layout-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-layout-8"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>File Pane - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041022;16274600">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_3_layout.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>File Pane – Main Window</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_5_folder_pane.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>2.4 File Pane</H1>
-<P>The file pane displays the images contained in the active folder.
-It has two modes of display, allows multiple selection, and can
-initiate drag and drop operations.</P>
-<P>A <B>context menu</B> can be displayed by clicking the right mouse
-button on the file pane or pressing the menu key while the file pane
-has the focus.</P>
-<P><BR><BR>
-</P>
-<P><U>List view</U></P>
-<P STYLE="margin-left: 0.79in">This mode can be enabled by selecting
-“List” from the View menu, pressing Control + L on the
-keyboard, or unselecting “View as icons” from the context
-menu.</P>
-<P STYLE="margin-left: 0.79in">The list view mode displays images in
-a standard vertical list. Three columns provide the file name, size
-in bytes, and the time the contents were last modified.</P>
-<P STYLE="margin-left: 0.79in"><B>Thumbnails</B> can be displayed
-next to each file in the list, to toggle thumbnails on or off by
-selecting “Thumbnails” from the View menu, pressing the T
-key, clicking the thumbnail button on the tool bar, or selecting
-“Show thumbnails” from the context menu.</P>
-<P><BR><BR>
-</P>
-<P><U>Icon view</U></P>
-<P STYLE="margin-left: 0.79in">This mode can be enabled by selecting
-“Icons” from the View menu, pressing Control + I on the
-keyboard, or selecting “View as icons” from the context
-menu.</P>
-<P STYLE="margin-left: 0.79in">The icon view mode displays images as
-thumbnails in a grid, and by default a file name below each
-thumbnail.</P>
-<P STYLE="margin-left: 0.79in">The <B>file name</B> displayed below
-each thumbnail can be turned on or off by selecting “Show
-filename text” from the context menu.</P>
-<P><BR><BR>
-</P>
-<P><U>Multiple selection</U></P>
-<P STYLE="margin-left: 0.79in">It is possible to select more than one
-image from the file pane. Multiple files can be selected with several
-methods:</P>
-<P STYLE="margin-left: 0.79in"><B>Mouse:</B></P>
-<UL>
- <LI><P>Control + Primary mouse button will add or remove the file
- from the selection.</P>
- <LI><P>Middle mouse button will toggle selection of the file.</P>
- <LI><P>Shift + Primary mouse button will select all images between
- the clicked and focused image, or it will unselect all those images
- if the clicked image is already selected.</P>
- <LI><P>Shift + Control + Primary mouse works as Shift + Primary, but
- will not change the selection of files outside the region between
- the focus and clicked image.</P>
-</UL>
-<P STYLE="margin-left: 0.79in"><B>Keyboard:</B></P>
-<UL>
- <LI><P>Control + Arrows will move the focus without changing the
- selection.</P>
- <LI><P>Control + Space will toggle selection of the focused image.</P>
- <LI><P>Shift + Arrows will select a region of images.</P>
- <LI><P>Shift + Control + Arrows works as Shift + Arrows, but will
- not change the selection of files outside the current focus region.</P>
-</UL>
-<P STYLE="margin-left: 0.79in">To select all files press Control + A,
-or to unselect all image press Control + Shift + A. These operations
-are also available from the Edit menu as “Select all” and
-“Select none”.</P>
-<P STYLE="margin-left: 0.79in">The current number of selected images
-and their total size will be indicated in the File list section of
-the <A HREF="2_7_status_bar.html">status bar</A>.</P>
-<P><BR><BR>
-</P>
-<P><U>Sorting</U></P>
-<P STYLE="margin-left: 0.79in">The order of the images can be changed
-by clicking the sort area of the status bar or from the context menu.
-The sort methods are by file name, number, file date, or file size.
-The number method will sort file names by their natural order, for
-example files with names of file_10, file_12, and file_9 will appear
-in order file_9, file_10, and file_12.</P>
-<P STYLE="margin-left: 0.79in">Selecting the ascending menu item will
-toggle between increasing and decreasing sort order.</P>
-<P><BR><BR>
-</P>
-<P><U>Context menu</U></P>
-<P>Right clicking the mouse or pressing the menu key while the file
-pane has focus will display a menu. The menu functions will perform
-the same as those that match the window's <A HREF="2_2_menus.html">menu
-bar</A>, however a few functions are unique to the context menu:</P>
-<P STYLE="margin-left: 0.79in"><B>View in new window:</B> Opens a new
-window containing a list of the currently selected images.</P>
-<P STYLE="margin-left: 0.79in"><B>Sort:</B> Changes the sort order of
-file pane.</P>
-<P STYLE="margin-left: 0.79in"><B>View as icons:</B> Toggles between
-the list and icon view modes.</P>
-<P STYLE="margin-left: 0.79in"><B>Show thumbnails:</B> Toggles
-display of thumbnails in the list view display mode.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Show filename
-text:</B> Toggles display of file names in the icon view display
-mode.</P>
-<P><BR><BR>
-</P>
-<P><U>Drag and Drop</U></P>
-<P STYLE="margin-left: 0.79in">Drag and drop can be initialized with
-the primary or middle mouse buttons in the file pane. Dragging a file
-that is selected will include all selected files in the drag.
-Dragging a file that is not selected will first change the selection
-to the dragged file, and clear the previous selection.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_3_layout.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_5_folder_pane.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>File Pane - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041022;16274600" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-file-pane-8 {margin-bottom: 0in}
+ p.gq-file-pane-7 {margin-left: 0.79in; font-weight: medium}
+ p.gq-file-pane-6 {font-weight: bold; margin-left: 0.79in}
+ p.gq-file-pane-5 {margin-left: 0.79in}
+ div.gq-file-pane-4 {text-align: center}
+ table.gq-file-pane-3 {page-break-before: always}
+ p.gq-file-pane-2 {text-align: right}
+ p.gq-file-pane-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-file-pane-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-file-pane-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_3_layout.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-file-pane-1">File Pane – Main Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-file-pane-2"><a href="2_5_folder_pane.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>2.4 File Pane</h1>
+
+ <p>The file pane displays the images contained in the active folder. It has two modes of display, allows multiple selection, and can initiate drag and drop operations.</p>
+
+ <p>A <b>context menu</b> can be displayed by clicking the right mouse button on the file pane or pressing the menu key while the file pane has the focus.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>List view</u>
+ </p>
+
+ <p class="gq-file-pane-5">This mode can be enabled by selecting “List” from the View menu, pressing Control + L on the keyboard, or unselecting “View as icons” from the context menu.</p>
+
+ <p class="gq-file-pane-5">The list view mode displays images in a standard vertical list. Three columns provide the file name, size in bytes, and the time the contents were last modified.</p>
+
+ <p class="gq-file-pane-5"><b>Thumbnails</b> can be displayed next to each file in the list, to toggle thumbnails on or off by selecting “Thumbnails” from the View menu, pressing the T key, clicking the thumbnail button on the tool bar, or selecting “Show thumbnails” from the context menu.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Icon view</u>
+ </p>
+
+ <p class="gq-file-pane-5">This mode can be enabled by selecting “Icons” from the View menu, pressing Control + I on the keyboard, or selecting “View as icons” from the context menu.</p>
+
+ <p class="gq-file-pane-5">The icon view mode displays images as thumbnails in a grid, and by default a file name below each thumbnail.</p>
+
+ <p class="gq-file-pane-5">The <b>file name</b> displayed below each thumbnail can be turned on or off by selecting “Show filename text” from the context menu.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Multiple selection</u>
+ </p>
+
+ <p class="gq-file-pane-5">It is possible to select more than one image from the file pane. Multiple files can be selected with several methods:</p>
+
+ <p class="gq-file-pane-6">Mouse:</p>
+
+ <ul>
+ <li>
+ <p>Control + Primary mouse button will add or remove the file from the selection.</p>
+ </li>
+
+ <li>
+ <p>Middle mouse button will toggle selection of the file.</p>
+ </li>
+
+ <li>
+ <p>Shift + Primary mouse button will select all images between the clicked and focused image, or it will unselect all those images if the clicked image is already selected.</p>
+ </li>
+
+ <li>
+ <p>Shift + Control + Primary mouse works as Shift + Primary, but will not change the selection of files outside the region between the focus and clicked image.</p>
+ </li>
+ </ul>
+
+ <p class="gq-file-pane-6">Keyboard:</p>
+
+ <ul>
+ <li>
+ <p>Control + Arrows will move the focus without changing the selection.</p>
+ </li>
+
+ <li>
+ <p>Control + Space will toggle selection of the focused image.</p>
+ </li>
+
+ <li>
+ <p>Shift + Arrows will select a region of images.</p>
+ </li>
+
+ <li>
+ <p>Shift + Control + Arrows works as Shift + Arrows, but will not change the selection of files outside the current focus region.</p>
+ </li>
+ </ul>
+
+ <p class="gq-file-pane-5">To select all files press Control + A, or to unselect all image press Control + Shift + A. These operations are also available from the Edit menu as “Select all” and “Select none”.</p>
+
+ <p class="gq-file-pane-5">The current number of selected images and their total size will be indicated in the File list section of the <a href="2_7_status_bar.html">status bar</a>.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Sorting</u>
+ </p>
+
+ <p class="gq-file-pane-5">The order of the images can be changed by clicking the sort area of the status bar or from the context menu. The sort methods are by file name, number, file date, or file size. The number method will sort file names by their natural order, for example files with names of file_10, file_12, and file_9 will appear in order file_9, file_10, and file_12.</p>
+
+ <p class="gq-file-pane-5">Selecting the ascending menu item will toggle between increasing and decreasing sort order.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Context menu</u>
+ </p>
+
+ <p>Right clicking the mouse or pressing the menu key while the file pane has focus will display a menu. The menu functions will perform the same as those that match the window's <a href="2_2_menus.html">menu bar</a>, however a few functions are unique to the context menu:</p>
+
+ <p class="gq-file-pane-5"><b>View in new window:</b> Opens a new window containing a list of the currently selected images.</p>
+
+ <p class="gq-file-pane-5"><b>Sort:</b> Changes the sort order of file pane.</p>
+
+ <p class="gq-file-pane-5"><b>View as icons:</b> Toggles between the list and icon view modes.</p>
+
+ <p class="gq-file-pane-5"><b>Show thumbnails:</b> Toggles display of thumbnails in the list view display mode.</p>
+
+ <p class="gq-file-pane-7"><b>Show filename text:</b> Toggles display of file names in the icon view display mode.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Drag and Drop</u>
+ </p>
+
+ <p class="gq-file-pane-5">Drag and drop can be initialized with the primary or middle mouse buttons in the file pane. Dragging a file that is selected will include all selected files in the drag. Dragging a file that is not selected will first change the selection to the dragged file, and clear the previous selection.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-file-pane-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_3_layout.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-file-pane-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-file-pane-2"><a href="2_5_folder_pane.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-file-pane-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-file-pane-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-file-pane-8"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Folder Pane - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050107;1544700">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_4_file_pane.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Folder Pane – Main Window</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_6_image_pane.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>2.5 Folder pane</H1>
-<P>The folder pane contains the menu bar, tool bar, path entry, and
-folder list.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>Menu
-bar</FONT></FONT></P>
-<P STYLE="margin-left: 0.79in">The main menu of the window. The
-functions available from the main menu are described in the <A HREF="2_2_menus.html">Menus</A>
-chapter.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>Tool
-bar</FONT></FONT></P>
-<P STYLE="margin-left: 0.79in">The tool bar includes buttons for
-often used operations. The tool bar can be hidden or shown by
-selecting “Hide toolbar” from the view menu.
-</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><I>Note: These
-buttons are only displayed as an icon, the text below refers to the
-tool tip that appears by hovering the mouse over each button.</I></P>
-<P STYLE="margin-left: 0.79in"><B>Show thumbnails:</B> This button is
-active when the file list is in list view mode, and activating it
-will toggle the display of thumbnails.</P>
-<P STYLE="margin-left: 0.79in"><B>Change to home folder:</B> Change
-the main window to display the contents of the user's home folder.</P>
-<P STYLE="margin-left: 0.79in"><B>Refresh file list:</B> This will
-check for changes to the active folder and update the window.</P>
-<P STYLE="margin-left: 0.79in"><B>Zoom in:</B> Increase the image
-display size.</P>
-<P STYLE="margin-left: 0.79in"><B>Zoom out:</B> Decrease the image
-display size.</P>
-<P STYLE="margin-left: 0.79in"><B>Fit image to window:</B> This will
-size the image to fit within the image view.</P>
-<P STYLE="margin-left: 0.79in"><B>Set zoom 1:1:</B> Restore zoom to
-the image's original size.</P>
-<P STYLE="margin-left: 0.79in"><B>Configure options:</B> Displays the
-<A HREF="10_options.html">Options window</A>.</P>
-<P STYLE="margin-left: 0.79in"><B>Float controls:</B> Toggle the
-folder pane, file pane, and status bar between the main window and a
-secondary window.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>Path
-entry</FONT></FONT></P>
-<P STYLE="margin-left: 0.79in">This displays the active folder of the
-window and allows typing a location.</P>
-<P STYLE="margin-left: 0.79in">A folder or file can be typed into the
-entry to quickly change to a desired location or image, the main
-window will update after pressing the Enter key. Tab completion is
-also available in the path entry.</P>
-<P STYLE="margin-left: 1.58in"><I>Note: Tab completion uses the tab
-key, press the down arrow to move the focus from the entry.</I></P>
-<P STYLE="margin-left: 0.79in">Next to the path entry is a button
-with a down arrow, clicking this will display a drop down list
-containing the most recent locations viewed. The list is ordered such
-that the most recent location is at the top. Selecting a location
-from the drop down list will change the window to display the
-location.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>Folder
-list</FONT></FONT></P>
-<P STYLE="margin-left: 0.79in">This displays a list of sub folders
-contained in the active folder, or a tree that includes all folders
-in the file system.</P>
-<P STYLE="margin-left: 0.79in">A <B>context menu</B> can be displayed
-by clicking the right mouse button on the folder pane or pressing the
-menu key while the folder pane has the focus</P>
-<P><U>List view</U></P>
-<P STYLE="margin-left: 0.79in">This mode can be enabled by
-unselecting “Tree” from the View menu, pressing Control +
-T, or unselecting “View as tree” from the context menu.</P>
-<P STYLE="margin-left: 0.79in">The list view mode displays sub
-folders contained in the active folder in a standard vertical list.
-The parent folder can be selected with the folder named “..”.</P>
-<P><U>Tree view</U></P>
-<P STYLE="margin-left: 0.79in">This mode can be enabled by selecting
-“Tree” from the View menu, pressing Control + T, or
-selecting “View as tree” from the context menu.</P>
-<P STYLE="margin-left: 0.79in">The tree view mode displays all
-folders in the file system, starting with the root folder and
-branching out to include sub folders. A folder branch can be expanded
-or collapsed by clicking the expander next to each folder icon, or by
-pressing the respective “+” or “-” keys when
-the folder branch has the focus.</P>
-<P><U>Sorting</U></P>
-<P STYLE="margin-left: 0.79in">The order of the folder names will
-match the order selected for the file pane. Sort order can be changed
-by clicking the sort area of the status bar or from the context menu
-of the file pane.</P>
-<P><U>Context menu</U></P>
-<P>Right clicking the mouse or pressing the menu key while the folder
-pane has focus will display a menu. The menu functions will perform
-the same as those that match the window's <A HREF="2_2_menus.html">menu
-bar</A>, however a few functions are unique to the context menu:</P>
-<P STYLE="margin-left: 0.79in"><B>Up to parent:</B> This will change
-the window to display the contents of the parent folder.</P>
-<P STYLE="margin-left: 0.79in"><B>Slide show:</B> Start a <A HREF="8_1_slideshow.html">slide
-show</A> that contains all images in the selected folder.</P>
-<P STYLE="margin-left: 0.79in"><B>Slide show recursive:</B> Start a
-<A HREF="8_1_slideshow.html">slide show</A> that contains all images
-in the selected folder, and all images in the sub folders of that
-folder.</P>
-<P STYLE="margin-left: 0.79in"><B>Find duplicates:</B> This will open
-a new <A HREF="5_2_finding_duplicates.html">find duplicates</A>
-window containing all images in the selected folder.</P>
-<P STYLE="margin-left: 0.79in"><B>Find duplicates recursive:</B> This
-will open a new <A HREF="5_2_finding_duplicates.html">find duplicates</A>
-window containing all image in the selected folder, and all images in
-the sub folders of that folder.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>New folder:</B>
-Creates a new folder that is a sub folder of the selected folder.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Rename:</B>
-Renames the selected folder.</P>
-<P STYLE="margin-left: 1.58in; font-weight: medium"><I>Note: Renaming
-a folder will not update metadata, such as keywords, or cached
-thumbnails for images contained in that folder, the data will be
-lost.</I></P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>View as tree:</B>
-Toggles between the list and tree modes of the folder pane.</P>
-<P><U>Drag and drop</U></P>
-<P STYLE="margin-left: 0.79in">Image files can be dropped onto
-folders displayed in the folder pane. A menu will appear allowing you
-to select to move or copy the dropped images into the target folder.
-The list will automatically scroll up or down when the drag pointer
-is near the respective top or bottom of the list. When in tree mode,
-hovering over a folder for a brief period of time will expand that
-folder.</P>
-<P STYLE="margin-left: 0.79in">The folders can used as a drag source
-for drag and drop, for example to add images in a folder to a
-collection window. However drag and drop can not be used to move or
-copy folders in Geeqie.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_4_file_pane.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_6_image_pane.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Folder Pane - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050107;1544700" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-folder-pane-12 {margin-bottom: 0in}
+ p.gq-folder-pane-11 {font-style: italic; font-weight: medium; margin-left: 1.58in}
+ p.gq-folder-pane-10 {margin-left: 0.79in; font-weight: medium}
+ p.gq-folder-pane-9 {font-style: italic; margin-left: 1.58in}
+ p.gq-folder-pane-8 {font-style: italic; font-weight: medium; margin-left: 0.79in}
+ p.gq-folder-pane-7 {margin-left: 0.79in}
+ p.gq-folder-pane-6 {font-family: Albany, sans-serif; margin-top: 0.17in; page-break-after: avoid}
+ span.gq-folder-pane-5 {font-size: 120%}
+ div.gq-folder-pane-4 {text-align: center}
+ table.gq-folder-pane-3 {page-break-before: always}
+ p.gq-folder-pane-2 {text-align: right}
+ p.gq-folder-pane-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-folder-pane-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-folder-pane-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_4_file_pane.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-folder-pane-1">Folder Pane – Main Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-folder-pane-2"><a href="2_6_image_pane.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>2.5 Folder pane</h1>
+
+ <p>The folder pane contains the menu bar, tool bar, path entry, and folder list.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-folder-pane-6"><span class="gq-folder-pane-5">Menu bar</span>
+ </p>
+
+ <p class="gq-folder-pane-7">The main menu of the window. The functions available from the main menu are described in the <a href="2_2_menus.html">Menus</a> chapter.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-folder-pane-6"><span class="gq-folder-pane-5">Tool bar</span>
+ </p>
+
+ <p class="gq-folder-pane-7">The tool bar includes buttons for often used operations. The tool bar can be hidden or shown by selecting “Hide toolbar” from the view menu.</p>
+
+ <p class="gq-folder-pane-8">Note: These buttons are only displayed as an icon, the text below refers to the tool tip that appears by hovering the mouse over each button.</p>
+
+ <p class="gq-folder-pane-7"><b>Show thumbnails:</b> This button is active when the file list is in list view mode, and activating it will toggle the display of thumbnails.</p>
+
+ <p class="gq-folder-pane-7"><b>Change to home folder:</b> Change the main window to display the contents of the user's home folder.</p>
+
+ <p class="gq-folder-pane-7"><b>Refresh file list:</b> This will check for changes to the active folder and update the window.</p>
+
+ <p class="gq-folder-pane-7"><b>Zoom in:</b> Increase the image display size.</p>
+
+ <p class="gq-folder-pane-7"><b>Zoom out:</b> Decrease the image display size.</p>
+
+ <p class="gq-folder-pane-7"><b>Fit image to window:</b> This will size the image to fit within the image view.</p>
+
+ <p class="gq-folder-pane-7"><b>Set zoom 1:1:</b> Restore zoom to the image's original size.</p>
+
+ <p class="gq-folder-pane-7"><b>Configure options:</b> Displays the <a href="10_options.html">Options window</a>.</p>
+
+ <p class="gq-folder-pane-7"><b>Float controls:</b> Toggle the folder pane, file pane, and status bar between the main window and a secondary window.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-folder-pane-6"><span class="gq-folder-pane-5">Path entry</span>
+ </p>
+
+ <p class="gq-folder-pane-7">This displays the active folder of the window and allows typing a location.</p>
+
+ <p class="gq-folder-pane-7">A folder or file can be typed into the entry to quickly change to a desired location or image, the main window will update after pressing the Enter key. Tab completion is also available in the path entry.</p>
+
+ <p class="gq-folder-pane-9">Note: Tab completion uses the tab key, press the down arrow to move the focus from the entry.</p>
+
+ <p class="gq-folder-pane-7">Next to the path entry is a button with a down arrow, clicking this will display a drop down list containing the most recent locations viewed. The list is ordered such that the most recent location is at the top. Selecting a location from the drop down list will change the window to display the location.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-folder-pane-6"><span class="gq-folder-pane-5">Folder list</span>
+ </p>
+
+ <p class="gq-folder-pane-7">This displays a list of sub folders contained in the active folder, or a tree that includes all folders in the file system.</p>
+
+ <p class="gq-folder-pane-7">A <b>context menu</b> can be displayed by clicking the right mouse button on the folder pane or pressing the menu key while the folder pane has the focus</p>
+
+ <p><u>List view</u>
+ </p>
+
+ <p class="gq-folder-pane-7">This mode can be enabled by unselecting “Tree” from the View menu, pressing Control + T, or unselecting “View as tree” from the context menu.</p>
+
+ <p class="gq-folder-pane-7">The list view mode displays sub folders contained in the active folder in a standard vertical list. The parent folder can be selected with the folder named “..”.</p>
+
+ <p><u>Tree view</u>
+ </p>
+
+ <p class="gq-folder-pane-7">This mode can be enabled by selecting “Tree” from the View menu, pressing Control + T, or selecting “View as tree” from the context menu.</p>
+
+ <p class="gq-folder-pane-7">The tree view mode displays all folders in the file system, starting with the root folder and branching out to include sub folders. A folder branch can be expanded or collapsed by clicking the expander next to each folder icon, or by pressing the respective “+” or “-” keys when the folder branch has the focus.</p>
+
+ <p><u>Sorting</u>
+ </p>
+
+ <p class="gq-folder-pane-7">The order of the folder names will match the order selected for the file pane. Sort order can be changed by clicking the sort area of the status bar or from the context menu of the file pane.</p>
+
+ <p><u>Context menu</u>
+ </p>
+
+ <p>Right clicking the mouse or pressing the menu key while the folder pane has focus will display a menu. The menu functions will perform the same as those that match the window's <a href="2_2_menus.html">menu bar</a>, however a few functions are unique to the context menu:</p>
+
+ <p class="gq-folder-pane-7"><b>Up to parent:</b> This will change the window to display the contents of the parent folder.</p>
+
+ <p class="gq-folder-pane-7"><b>Slide show:</b> Start a <a href="8_1_slideshow.html">slide show</a> that contains all images in the selected folder.</p>
+
+ <p class="gq-folder-pane-7"><b>Slide show recursive:</b> Start a <a href="8_1_slideshow.html">slide show</a> that contains all images in the selected folder, and all images in the sub folders of that folder.</p>
+
+ <p class="gq-folder-pane-7"><b>Find duplicates:</b> This will open a new <a href="5_2_finding_duplicates.html">find duplicates</a> window containing all images in the selected folder.</p>
+
+ <p class="gq-folder-pane-7"><b>Find duplicates recursive:</b> This will open a new <a href="5_2_finding_duplicates.html">find duplicates</a> window containing all image in the selected folder, and all images in the sub folders of that folder.</p>
+
+ <p class="gq-folder-pane-10"><b>New folder:</b> Creates a new folder that is a sub folder of the selected folder.</p>
+
+ <p class="gq-folder-pane-10"><b>Rename:</b> Renames the selected folder.</p>
+
+ <p class="gq-folder-pane-11">Note: Renaming a folder will not update metadata, such as keywords, or cached thumbnails for images contained in that folder, the data will be lost.</p>
+
+ <p class="gq-folder-pane-10"><b>View as tree:</b> Toggles between the list and tree modes of the folder pane.</p>
+
+ <p><u>Drag and drop</u>
+ </p>
+
+ <p class="gq-folder-pane-7">Image files can be dropped onto folders displayed in the folder pane. A menu will appear allowing you to select to move or copy the dropped images into the target folder. The list will automatically scroll up or down when the drag pointer is near the respective top or bottom of the list. When in tree mode, hovering over a folder for a brief period of time will expand that folder.</p>
+
+ <p class="gq-folder-pane-7">The folders can used as a drag source for drag and drop, for example to add images in a folder to a collection window. However drag and drop can not be used to move or copy folders in Geeqie.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-folder-pane-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_4_file_pane.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-folder-pane-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-folder-pane-2"><a href="2_6_image_pane.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-folder-pane-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-folder-pane-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-folder-pane-12"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Image Pane - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041222;16353200">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_5_folder_pane.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Image Pane - Main Window</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_7_status_bar.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>2.6 Image Pane</H1>
-<P>The image pane is the region of the main window that displays the
-selected image. The image pane allows adjustment of display size and
-orientation; it also provides several methods to manipulate the image
-with the mouse and keyboard.</P>
-<P><BR><BR>
-</P>
-<P><U>Image display</U></P>
-<P>The image is drawn to the screen as it is decoded from disk. The
-image can be panned and zoomed while it is still loading. Image
-adjustment operations for rotation, mirror, and flip will delay until
-the image is completed. The adjustment queue will remember one
-operation and will retain the most recently requested function, which
-will be performed once the image has finished loading.</P>
-<P>The quality of the image, especially when using the zoom feature,
-is dependent on the settings that are available on the <A HREF="10_2_image.html">Image
-tab</A> of the preferences dialog.</P>
-<P>To increase the speed of loading the next image when navigating
-the image list in sequence, enable the <A HREF="10_2_image.html">Preload
-next image</A> option.</P>
-<P><BR><BR>
-</P>
-<P><U>Image panning and manipulation</U></P>
-<P STYLE="text-decoration: none">When the image size is larger than
-the image pane, the visible region can be changed with the keyboard
-or mouse. The keyboard can also be used to adjust the orientation of
-the image.</P>
-<P STYLE="margin-left: 0.79in"><SPAN STYLE="text-decoration: none"><B>Keyboard</B>:
-Use the arrow keys to pan the image in the desired direction, to
-increase the panning speed hold down the Shift key while pressing an
-arrow key.</SPAN> Press Control and an arrow key to move to the
-respective edge of the image. The image can only be panned with the
-keyboard when the image has the focus, indicated by a dotted line
-surrounding the image pane.</P>
-<P STYLE="margin-left: 0.79in">To scale the image size, use the [+]
-or [=] key to zoom in and the [-] key to zoom out. The [X] or keypad
-[*] key will scale the image to fit the available display area, the
-[Z] or keypad [/] key will reset the zoom to original image size.
-There are also keys to select a preset zoom factor: [1] = 1:1, [2] =
-2:1, [3] =3:1, [4] = 4:1, [7] = 1:4, [8] = 1:3, and [9] = 1:2.</P>
-<P STYLE="margin-left: 0.79in">To rotate the image clockwise 90
-degrees press the “]” key, to rotate counterclockwise 90
-degrees press the “[“ key. To rotate the image 180
-degrees use [Shift] + [R], the image can also be flipped horizontally
-or vertically with the respective [Shift] + [M] (mirror) and [Shift]
-+ [F] (flip) keys.</P>
-<P STYLE="margin-left: 1.58in"><I>Note: The rotation, mirror, and
-flip functions will not change the image file on disk.</I></P>
-<P STYLE="margin-left: 0.79in"><SPAN STYLE="text-decoration: none"><B>Mouse</B>:</SPAN>
-Press the primary mouse button on the image and hold it, then move
-the mouse to pan the image in the desired direction. Releasing the
-mouse button will stop the panning operation. The mouse wheel can
-also be used to scroll the image when holding down the [Shift] key
-(*).</P>
-<P STYLE="margin-left: 0.79in">To scale the image size hold down the
-[Control] key and scroll the mouse wheel up to zoom in, or down to
-zoom out.</P>
-<P STYLE="margin-left: 0.79in"><B>Smooth Scroll:</B> To start the
-smooth scroll function hold down the [Shift] key and click the
-primary mouse button. An icon will appear at the location of the
-mouse pointer, the mouse can then be positioned to pan the image. The
-image will pan in the direction of the mouse pointer relative to the
-icon. The pan speed will increase in proportion to the distance that
-the pointer is from the center of the icon. To end the smooth scroll
-function click the primary mouse button within the image pane.</P>
-<P><BR><BR>
-</P>
-<P><U>Navigation</U></P>
-<P STYLE="font-weight: medium">The displayed image can be changed to
-the next or previous image using the keyboard or mouse.</P>
-<P STYLE="margin-left: 0.79in"><B>Keyboard</B>: The Page Down and
-Page Up keys will change the image to the next or previous image,
-respectively, in the list. The Home and End keys will jump to the
-first and last image, respectively. When the image has the focus, the
-Space and Back Space keys can also be used to change the image.</P>
-<P STYLE="margin-left: 0.79in"><B>Mouse</B>: To change to the next
-image in the list click the left mouse button, click the middle mouse
-button to change to the previous image. The mouse wheel can also be
-used to change the current image (*).</P>
-<P><BR><BR>
-</P>
-<P><U>Context menu</U></P>
-<P>Right clicking the mouse or pressing the menu key while the image
-has the focus will display a menu. The menu functions will perform
-the same as those that match the window's <A HREF="2_2_menus.html">menu
-bar</A>, however a few functions are unique to the context menu:</P>
-<P STYLE="margin-left: 0.79in"><B>View in new window:</B> Opens a new
-window containing a second copy of the current image.</P>
-<P STYLE="margin-left: 0.79in"><B>Pause slide show</B>, <B>Continue
-slide show</B>: Controls the pause state of an active slide show, the
-text of the menu will change to reflect the action that will be
-performed.</P>
-<P><BR><BR>
-</P>
-<P><U>Drag and Drop</U></P>
-<P STYLE="margin-left: 0.79in">Files and folders can be dropped onto
-the image pane, dropping a file will display the file and dropping a
-folder will change the main window to display the contents of the
-folder. When dropping multiple items on the image pane, only the
-first item in the list will be used, all additional items will be
-ignored.</P>
-<P STYLE="margin-left: 0.79in">A drag and drop operation can be
-initiated from the image pane with the middle mouse button, the
-dragged item will contain the file path of the displayed image.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P>(*) Note: The mouse wheel behavior for scrolling and image step
-can be swapped with the <U>Mouse wheel scrolls image</U> option
-located on the <A HREF="10_6_advanced.html">Advanced tab</A> of the
-preferences dialog.</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_5_folder_pane.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_7_status_bar.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Image Pane - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041222;16353200" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-image-pane-10 {margin-bottom: 0in}
+ p.gq-image-pane-9 {font-weight: medium}
+ p.gq-image-pane-8 {font-style: italic; margin-left: 1.58in}
+ p.gq-image-pane-7 {margin-left: 0.79in}
+ span.gq-image-pane-6 {text-decoration: none}
+ p.gq-image-pane-5 {text-decoration: none}
+ div.gq-image-pane-4 {text-align: center}
+ table.gq-image-pane-3 {page-break-before: always}
+ p.gq-image-pane-2 {text-align: right}
+ p.gq-image-pane-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-image-pane-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-image-pane-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_5_folder_pane.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-pane-1">Image Pane - Main Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-pane-2"><a href="2_7_status_bar.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>2.6 Image Pane</h1>
+
+ <p>The image pane is the region of the main window that displays the selected image. The image pane allows adjustment of display size and orientation; it also provides several methods to manipulate the image with the mouse and keyboard.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Image display</u>
+ </p>
+
+ <p>The image is drawn to the screen as it is decoded from disk. The image can be panned and zoomed while it is still loading. Image adjustment operations for rotation, mirror, and flip will delay until the image is completed. The adjustment queue will remember one operation and will retain the most recently requested function, which will be performed once the image has finished loading.</p>
+
+ <p>The quality of the image, especially when using the zoom feature, is dependent on the settings that are available on the <a href="10_2_image.html">Image tab</a> of the preferences dialog.</p>
+
+ <p>To increase the speed of loading the next image when navigating the image list in sequence, enable the <a href="10_2_image.html">Preload next image</a> option.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Image panning and manipulation</u>
+ </p>
+
+ <p class="gq-image-pane-5">When the image size is larger than the image pane, the visible region can be changed with the keyboard or mouse. The keyboard can also be used to adjust the orientation of the image.</p>
+
+ <p class="gq-image-pane-7"><span class="gq-image-pane-6"><b>Keyboard</b>: Use the arrow keys to pan the image in the desired direction, to increase the panning speed hold down the Shift key while pressing an arrow key.</span> Press Control and an arrow key to move to the respective edge of the image. The image can only be panned with the keyboard when the image has the focus, indicated by a dotted line surrounding the image pane.</p>
+
+ <p class="gq-image-pane-7">To scale the image size, use the [+] or [=] key to zoom in and the [-] key to zoom out. The [X] or keypad [*] key will scale the image to fit the available display area, the [Z] or keypad [/] key will reset the zoom to original image size. There are also keys to select a preset zoom factor: [1] = 1:1, [2] = 2:1, [3] =3:1, [4] = 4:1, [7] = 1:4, [8] = 1:3, and [9] = 1:2.</p>
+
+ <p class="gq-image-pane-7">To rotate the image clockwise 90 degrees press the “]” key, to rotate counterclockwise 90 degrees press the “[“ key. To rotate the image 180 degrees use [Shift] + [R], the image can also be flipped horizontally or vertically with the respective [Shift] + [M] (mirror) and [Shift] + [F] (flip) keys.</p>
+
+ <p class="gq-image-pane-8">Note: The rotation, mirror, and flip functions will not change the image file on disk.</p>
+
+ <p class="gq-image-pane-7"><span class="gq-image-pane-6"><b>Mouse</b>:</span> Press the primary mouse button on the image and hold it, then move the mouse to pan the image in the desired direction. Releasing the mouse button will stop the panning operation. The mouse wheel can also be used to scroll the image when holding down the [Shift] key (*).</p>
+
+ <p class="gq-image-pane-7">To scale the image size hold down the [Control] key and scroll the mouse wheel up to zoom in, or down to zoom out.</p>
+
+ <p class="gq-image-pane-7"><b>Smooth Scroll:</b> To start the smooth scroll function hold down the [Shift] key and click the primary mouse button. An icon will appear at the location of the mouse pointer, the mouse can then be positioned to pan the image. The image will pan in the direction of the mouse pointer relative to the icon. The pan speed will increase in proportion to the distance that the pointer is from the center of the icon. To end the smooth scroll function click the primary mouse button within the image pane.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Navigation</u>
+ </p>
+
+ <p class="gq-image-pane-9">The displayed image can be changed to the next or previous image using the keyboard or mouse.</p>
+
+ <p class="gq-image-pane-7"><b>Keyboard</b>: The Page Down and Page Up keys will change the image to the next or previous image, respectively, in the list. The Home and End keys will jump to the first and last image, respectively. When the image has the focus, the Space and Back Space keys can also be used to change the image.</p>
+
+ <p class="gq-image-pane-7"><b>Mouse</b>: To change to the next image in the list click the left mouse button, click the middle mouse button to change to the previous image. The mouse wheel can also be used to change the current image (*).</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Context menu</u>
+ </p>
+
+ <p>Right clicking the mouse or pressing the menu key while the image has the focus will display a menu. The menu functions will perform the same as those that match the window's <a href="2_2_menus.html">menu bar</a>, however a few functions are unique to the context menu:</p>
+
+ <p class="gq-image-pane-7"><b>View in new window:</b> Opens a new window containing a second copy of the current image.</p>
+
+ <p class="gq-image-pane-7"><b>Pause slide show</b>, <b>Continue slide show</b>: Controls the pause state of an active slide show, the text of the menu will change to reflect the action that will be performed.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Drag and Drop</u>
+ </p>
+
+ <p class="gq-image-pane-7">Files and folders can be dropped onto the image pane, dropping a file will display the file and dropping a folder will change the main window to display the contents of the folder. When dropping multiple items on the image pane, only the first item in the list will be used, all additional items will be ignored.</p>
+
+ <p class="gq-image-pane-7">A drag and drop operation can be initiated from the image pane with the middle mouse button, the dragged item will contain the file path of the displayed image.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>(*) Note: The mouse wheel behavior for scrolling and image step can be swapped with the <u>Mouse wheel scrolls image</u> option located on the <a href="10_6_advanced.html">Advanced tab</a> of the preferences dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-image-pane-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_5_folder_pane.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-pane-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-pane-2"><a href="2_7_status_bar.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-pane-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-pane-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-image-pane-10"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Status Bar - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040814;9084700">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_6_image_pane.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Status Bar - Main Window</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="3_other_windows.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>2.7 Status Bar</H1>
-<P>The status bar contains information and details about the contents
-of the main window. Information displayed includes the progress of
-generating thumbnails, the number of files in the file list with byte
-size, the current file selection count including byte size, details
-about the currently displayed image, and the zoom setting. The
-current sort preference is also displayed, and can be adjusted from
-the status bar.</P>
-<P>The status bar is comprised of five sections, from left to right
-these are a progress bar, sort method, file list counts, image
-details, and zoom setting. Each section is described below.</P>
-<P><U>Progress Bar</U></P>
-<P>The Progress bar updates to display the current state of thumbnail
-generation. When this section contains no text, thumbnail generation
-is idle. When “Loading thumbs...” is displayed,
-thumbnails are currently being generated when Geeqie is idle; the
-progress bar will update to display the percentage of thumbnails that
-are completed.</P>
-<P><U>Sort method</U></P>
-<P>This is the method used to sort image names in the file list.
-Clicking or activating this field will display a menu to allow
-selection of the sort method.</P>
-<P STYLE="margin-left: 0.79in"><B>Name</B>: Images are sorted by file
-name.<BR><B>Number</B>: Images are sorted by natural numerical order,
-such that, for example, 9_name.jpg will be listed before
-10_name.jpg.<BR><B>Date</B>: Images are sorted by file date on
-disk.<BR><B>Size</B>: Image are sorted by file size on
-disk.<BR><B>Ascending</B>: Toggles between increasing and decreasing
-sort order. A check will appear next to this entry to indicate
-ascending sort order.</P>
-<P><U>File list</U></P>
-<P>This section displays the count of files that appear in the file
-list, including the total byte size. The number of files selected is
-displayed in parenthesis, including the total byte size of the
-selected files. The slide show status is also displayed here; when a
-slide show is running, “Slideshow” will appear, the text
-will change to “Paused” when a slide show is in the
-paused state.</P>
-<P><U>Image Details</U></P>
-<P>This section displays the dimensions (width x height) and file
-byte size of the image that is active in the image pane. When the
-format of the file in the image pane can not be determined the
-dimensions will show as “(0 x 0)”, in addition “(no
-read permision)” may appear if the file permissions do not
-allow reading the contents of the file.</P>
-<P><U>Zoom</U></P>
-<P>This section displays the current zoom ratio. A ratio of 1:1 is
-the image's original size. When the left number is larger the image
-is displayed larger than original size, when the right number is
-larger the image is displayed smaller.</P>
-<P>A tilde (~) appears within the ratio display when the zoom is set
-to fit the image within the display area. In this zoom mode the ratio
-is automatically adjusted, and the displayed ratio may not be the
-actual ratio because the status bar display rounds the actual value
-to the nearest tenth (0.1).</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_6_image_pane.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="3_other_windows.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Status Bar - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040814;9084700" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-status-bar-6 {margin-bottom: 0in}
+ p.gq-status-bar-5 {margin-left: 0.79in}
+ div.gq-status-bar-4 {text-align: center}
+ table.gq-status-bar-3 {page-break-before: always}
+ p.gq-status-bar-2 {text-align: right}
+ p.gq-status-bar-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-status-bar-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-status-bar-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_6_image_pane.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-status-bar-1">Status Bar - Main Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-status-bar-2"><a href="3_other_windows.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>2.7 Status Bar</h1>
+
+ <p>The status bar contains information and details about the contents of the main window. Information displayed includes the progress of generating thumbnails, the number of files in the file list with byte size, the current file selection count including byte size, details about the currently displayed image, and the zoom setting. The current sort preference is also displayed, and can be adjusted from the status bar.</p>
+
+ <p>The status bar is comprised of five sections, from left to right these are a progress bar, sort method, file list counts, image details, and zoom setting. Each section is described below.</p>
+
+ <p><u>Progress Bar</u>
+ </p>
+
+ <p>The Progress bar updates to display the current state of thumbnail generation. When this section contains no text, thumbnail generation is idle. When “Loading thumbs...” is displayed, thumbnails are currently being generated when Geeqie is idle; the progress bar will update to display the percentage of thumbnails that are completed.</p>
+
+ <p><u>Sort method</u>
+ </p>
+
+ <p>This is the method used to sort image names in the file list. Clicking or activating this field will display a menu to allow selection of the sort method.</p>
+
+ <p class="gq-status-bar-5"><b>Name</b>: Images are sorted by file name.<br />
+ <b>Number</b>: Images are sorted by natural numerical order, such that, for example, 9_name.jpg will be listed before 10_name.jpg.<br />
+ <b>Date</b>: Images are sorted by file date on disk.<br />
+ <b>Size</b>: Image are sorted by file size on disk.<br />
+ <b>Ascending</b>: Toggles between increasing and decreasing sort order. A check will appear next to this entry to indicate ascending sort order.</p>
+
+ <p><u>File list</u>
+ </p>
+
+ <p>This section displays the count of files that appear in the file list, including the total byte size. The number of files selected is displayed in parenthesis, including the total byte size of the selected files. The slide show status is also displayed here; when a slide show is running, “Slideshow” will appear, the text will change to “Paused” when a slide show is in the paused state.</p>
+
+ <p><u>Image Details</u>
+ </p>
+
+ <p>This section displays the dimensions (width x height) and file byte size of the image that is active in the image pane. When the format of the file in the image pane can not be determined the dimensions will show as “(0 x 0)”, in addition “(no read permision)” may appear if the file permissions do not allow reading the contents of the file.</p>
+
+ <p><u>Zoom</u>
+ </p>
+
+ <p>This section displays the current zoom ratio. A ratio of 1:1 is the image's original size. When the left number is larger the image is displayed larger than original size, when the right number is larger the image is displayed smaller.</p>
+
+ <p>A tilde (~) appears within the ratio display when the zoom is set to fit the image within the display area. In this zoom mode the ratio is automatically adjusted, and the displayed ratio may not be the actual ratio because the status bar display rounds the actual value to the nearest tenth (0.1).</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-status-bar-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_6_image_pane.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-status-bar-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-status-bar-2"><a href="3_other_windows.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-status-bar-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-status-bar-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-status-bar-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Main Window - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040822;10265200">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="1_introduction.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Main Window</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_1_navigation.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>2. Main Window</H1>
-<P>The Geeqie main window is designed for quick and easy navigation
-of images. The window consists of three regions: the file pane, the
-folder pane, and the image pane.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">2.1 <A HREF="2_1_navigation.html">Navigation</A></P>
-<P STYLE="margin-left: 0.79in">2.2 <A HREF="2_2_menus.html">Menus</A></P>
-<P STYLE="margin-left: 0.79in">2.3 <A HREF="2_3_layout.html">Layout</A></P>
-<P STYLE="margin-left: 0.79in">2.4 <A HREF="2_4_file_pane.html">File
-Pane</A></P>
-<P STYLE="margin-left: 0.79in">2.5 <A HREF="2_5_folder_pane.html">Folder
-Pane</A></P>
-<P STYLE="margin-left: 0.79in">2.6 <A HREF="2_6_image_pane.html">Image
-Pane</A></P>
-<P STYLE="margin-left: 0.79in">2.7 <A HREF="2_7_status_bar.html">Status
-Bar</A></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="1_introduction.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="2_1_navigation.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Main Window - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040822;10265200" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-main-window-6 {margin-bottom: 0in}
+ p.gq-main-window-5 {margin-left: 0.79in}
+ div.gq-main-window-4 {text-align: center}
+ table.gq-main-window-3 {page-break-before: always}
+ p.gq-main-window-2 {text-align: right}
+ p.gq-main-window-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-main-window-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-main-window-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="1_introduction.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-main-window-1">Main Window</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-main-window-2"><a href="2_1_navigation.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>2. Main Window</h1>
+
+ <p>The Geeqie main window is designed for quick and easy navigation of images. The window consists of three regions: the file pane, the folder pane, and the image pane.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-main-window-5">2.1 <a href="2_1_navigation.html">Navigation</a></p>
+
+ <p class="gq-main-window-5">2.2 <a href="2_2_menus.html">Menus</a></p>
+
+ <p class="gq-main-window-5">2.3 <a href="2_3_layout.html">Layout</a></p>
+
+ <p class="gq-main-window-5">2.4 <a href="2_4_file_pane.html">File Pane</a></p>
+
+ <p class="gq-main-window-5">2.5 <a href="2_5_folder_pane.html">Folder Pane</a></p>
+
+ <p class="gq-main-window-5">2.6 <a href="2_6_image_pane.html">Image Pane</a></p>
+
+ <p class="gq-main-window-5">2.7 <a href="2_7_status_bar.html">Status Bar</a></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-main-window-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="1_introduction.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-main-window-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-main-window-2"><a href="2_1_navigation.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-main-window-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-main-window-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-main-window-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Image Window - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041022;15583700">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="3_other_windows.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Image Window - Other Windows</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="3_2_image_properties.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>3.1 Image Window</H1>
-<P>An image window is a window that displays only the image.</P>
-<P>An image window can always be opened from the context menu of all
-images and files. Keyboard shortcuts exist for most windows that
-display images or files, however the shortcut can vary dependent on
-the type of window containing them.</P>
-<P><BR><BR>
-</P>
-<P>The image pane contained in an image window behaves and operates
-similar to the image pane of a <A HREF="2_6_image_pane.html">Main
-Window</A>. The keyboard shortcuts are the same, and the context menu
-is the same except “Hide file list” is replaced by “Close
-window”. The <A HREF="8_1_slideshow.html">slide show</A> and
-<A HREF="8_2_fillscreen.html">full screen</A> functions are also
-available.</P>
-<P><BR><BR>
-</P>
-<P><U>Navigation</U></P>
-<P>When the image window contains a list of images or is linked to a
-collection, the displayed image can be changed forward or backward in
-the list with the respective PageDown and PageUp keys. In addition,
-all navigation methods for the mouse and keyboard are similar to that
-of the image pane of a <A HREF="2_6_image_pane.html">Main Window</A>.</P>
-<P><BR><BR>
-</P>
-<P><U>Changing the image</U></P>
-<P>To change the contents of an image window, drop the items onto the
-window with drag and drop. The dropped item can be one or more files,
-folders, or an image from a collection window:</P>
-<P STYLE="margin-left: 0.79in">One or more <B>files</B>: The image
-window will display the first image; the list of dropped images can
-be navigated similar to a main window's image pane.</P>
-<P STYLE="margin-left: 0.79in">One or more <B>folders</B>: When the
-dropped list of items includes a folder, a menu will appear allowing
-to skip the folders, add their contents, or add their contents
-recursively. After choosing from the menu the requested files will be
-added to the image window.</P>
-<P STYLE="margin-left: 0.79in">Image from a <B>collection</B>: The
-image window will change to display the image and become linked to
-the collection containing the image. Images in the collection can
-then be navigated and viewed from the image window.</P>
-<P>Changing the image window by dropping a new item onto it will
-cause the previous list of images or linked collection to be
-discarded.</P>
-<P>To update the image display in the event that the source file has
-changed, press the R key.</P>
-<P><BR><BR>
-</P>
-<P><U>Information Overlay</U></P>
-<P STYLE="margin-left: 0.79in">A small overlay can be turned on and
-off by pressing the I key. This overlay displays the image file name,
-dimensions, file date, and file size. The count of the current image
-and of all images contained by the window are also displayed in
-parenthesis. When the window is linked to a collection, the
-collection title will also appear in the overlay in italics above the
-file name.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="previous.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="3_2_image_properties.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Image Window - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041022;15583700" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-image-window-6 {margin-bottom: 0in}
+ p.gq-image-window-5 {margin-left: 0.79in}
+ div.gq-image-window-4 {text-align: center}
+ table.gq-image-window-3 {page-break-before: always}
+ p.gq-image-window-2 {text-align: right}
+ p.gq-image-window-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-image-window-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-image-window-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="3_other_windows.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-window-1">Image Window - Other Windows</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-window-2"><a href="3_2_image_properties.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>3.1 Image Window</h1>
+
+ <p>An image window is a window that displays only the image.</p>
+
+ <p>An image window can always be opened from the context menu of all images and files. Keyboard shortcuts exist for most windows that display images or files, however the shortcut can vary dependent on the type of window containing them.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>The image pane contained in an image window behaves and operates similar to the image pane of a <a href="2_6_image_pane.html">Main Window</a>. The keyboard shortcuts are the same, and the context menu is the same except “Hide file list” is replaced by “Close window”. The <a href="8_1_slideshow.html">slide show</a> and <a href="8_2_fillscreen.html">full screen</a> functions are also available.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Navigation</u>
+ </p>
+
+ <p>When the image window contains a list of images or is linked to a collection, the displayed image can be changed forward or backward in the list with the respective PageDown and PageUp keys. In addition, all navigation methods for the mouse and keyboard are similar to that of the image pane of a <a href="2_6_image_pane.html">Main Window</a>.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Changing the image</u>
+ </p>
+
+ <p>To change the contents of an image window, drop the items onto the window with drag and drop. The dropped item can be one or more files, folders, or an image from a collection window:</p>
+
+ <p class="gq-image-window-5">One or more <b>files</b>: The image window will display the first image; the list of dropped images can be navigated similar to a main window's image pane.</p>
+
+ <p class="gq-image-window-5">One or more <b>folders</b>: When the dropped list of items includes a folder, a menu will appear allowing to skip the folders, add their contents, or add their contents recursively. After choosing from the menu the requested files will be added to the image window.</p>
+
+ <p class="gq-image-window-5">Image from a <b>collection</b>: The image window will change to display the image and become linked to the collection containing the image. Images in the collection can then be navigated and viewed from the image window.</p>
+
+ <p>Changing the image window by dropping a new item onto it will cause the previous list of images or linked collection to be discarded.</p>
+
+ <p>To update the image display in the event that the source file has changed, press the R key.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Information Overlay</u>
+ </p>
+
+ <p class="gq-image-window-5">A small overlay can be turned on and off by pressing the I key. This overlay displays the image file name, dimensions, file date, and file size. The count of the current image and of all images contained by the window are also displayed in parenthesis. When the window is linked to a collection, the collection title will also appear in the overlay in italics above the file name.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-image-window-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="previous.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-window-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-window-2"><a href="3_2_image_properties.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-window-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-window-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-image-window-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Image Properties Window - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041022;13464500">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="3_1_image_window.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Image Properties - Other Windows</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_image_management.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>3.2 Image Properties Window</H1>
-<P>The image properties window is a dialog that displays various
-information about a file.</P>
-<P>To display a properties window for a an image select Properties
-from it's context menu, in most windows pressing Control + P will
-display the properties of the selected images or files.</P>
-<P><BR><BR>
-</P>
-<P>The properties window contains a scaled down image of the file and
-information about the file under several tabs. If the window contains
-more than one file, they can be navigated by activating the left and
-right arrow buttons, or by clicking the primary and middle mouse
-buttons on the image preview.</P>
-<P><BR><BR>
-</P>
-<P><U>Image preview</U></P>
-<P STYLE="margin-left: 0.79in">This displays the contents of the
-active file. When the window contains more than one file, they can be
-navigated with the primary and middle mouse buttons. The image
-display is also a drag source for drag and drop, start the drag
-operation by pressing the middle mouse button and dragging the file
-to the desired target.</P>
-<P><BR><BR>
-</P>
-<P><U>General tab</U></P>
-<P STYLE="margin-left: 0.79in">This displays information about the
-active file. It includes:</P>
-<P STYLE="margin-left: 1.58in"><B>File attributes:</B> Modification
-date and time, size, owner, group, and permissions.</P>
-<P STYLE="margin-left: 1.58in"><B>Image attributes:</B> Dimensions,
-uncompressed size, file or mime type, and existence of an alpha
-channel.</P>
-<P STYLE="margin-left: 1.58in"><B>Compress ratio:</B> The percentage
-of file size compared to the size of the image when decoded into
-memory.</P>
-<P><BR><BR>
-</P>
-<P><U>Keywords tab</U></P>
-<P STYLE="margin-left: 0.79in">The keywords tab contains the same
-information that is in the Keywords sidebar, please refer to the
-<A HREF="7_3_keywords.html">Keywords Sidebar</A> page for details.</P>
-<P><BR><BR>
-</P>
-<P><U>EXIF tab</U></P>
-<P STYLE="margin-left: 0.79in">The EXIF tab contains the same
-information that is in the EXIF sidebar, please refer to the <A HREF="7_1_exif.html">EXIF
-Sidebar</A> page for details.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="3_1_image_window.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_image_management.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Image Properties Window - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041022;13464500" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-image-properties-7 {margin-bottom: 0in}
+ p.gq-image-properties-6 {margin-left: 1.58in}
+ p.gq-image-properties-5 {margin-left: 0.79in}
+ div.gq-image-properties-4 {text-align: center}
+ table.gq-image-properties-3 {page-break-before: always}
+ p.gq-image-properties-2 {text-align: right}
+ p.gq-image-properties-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-image-properties-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-image-properties-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="3_1_image_window.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-properties-1">Image Properties - Other Windows</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-properties-2"><a href="4_image_management.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>3.2 Image Properties Window</h1>
+
+ <p>The image properties window is a dialog that displays various information about a file.</p>
+
+ <p>To display a properties window for a an image select Properties from it's context menu, in most windows pressing Control + P will display the properties of the selected images or files.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>The properties window contains a scaled down image of the file and information about the file under several tabs. If the window contains more than one file, they can be navigated by activating the left and right arrow buttons, or by clicking the primary and middle mouse buttons on the image preview.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Image preview</u>
+ </p>
+
+ <p class="gq-image-properties-5">This displays the contents of the active file. When the window contains more than one file, they can be navigated with the primary and middle mouse buttons. The image display is also a drag source for drag and drop, start the drag operation by pressing the middle mouse button and dragging the file to the desired target.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>General tab</u>
+ </p>
+
+ <p class="gq-image-properties-5">This displays information about the active file. It includes:</p>
+
+ <p class="gq-image-properties-6"><b>File attributes:</b> Modification date and time, size, owner, group, and permissions.</p>
+
+ <p class="gq-image-properties-6"><b>Image attributes:</b> Dimensions, uncompressed size, file or mime type, and existence of an alpha channel.</p>
+
+ <p class="gq-image-properties-6"><b>Compress ratio:</b> The percentage of file size compared to the size of the image when decoded into memory.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Keywords tab</u>
+ </p>
+
+ <p class="gq-image-properties-5">The keywords tab contains the same information that is in the Keywords sidebar, please refer to the <a href="7_3_keywords.html">Keywords Sidebar</a> page for details.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>EXIF tab</u>
+ </p>
+
+ <p class="gq-image-properties-5">The EXIF tab contains the same information that is in the EXIF sidebar, please refer to the <a href="7_1_exif.html">EXIF Sidebar</a> page for details.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-image-properties-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="3_1_image_window.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-properties-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-properties-2"><a href="4_image_management.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-properties-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-properties-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-image-properties-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Other Windows - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041006;15403300">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_7_status_bar.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Other Windows</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="3_1_image_window.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>3. Other Windows</H1>
-<P>This section describes the windows available in Geeqie that can be
-thought of as general purpose, they are not designed for a specific
-purpose.</P>
-<P STYLE="margin-left: 0.79in">3.1 <A HREF="3_1_image_window.html">Image
-Window</A></P>
-<P STYLE="margin-left: 0.79in">3.2 <A HREF="3_2_image_properties.html">Image
-Properties</A> Window</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="2_7_status_bar.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="3_1_image_window.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Other Windows - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041006;15403300" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-other-windows-6 {margin-bottom: 0in}
+ p.gq-other-windows-5 {margin-left: 0.79in}
+ div.gq-other-windows-4 {text-align: center}
+ table.gq-other-windows-3 {page-break-before: always}
+ p.gq-other-windows-2 {text-align: right}
+ p.gq-other-windows-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-other-windows-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-other-windows-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_7_status_bar.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-other-windows-1">Other Windows</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-other-windows-2"><a href="3_1_image_window.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>3. Other Windows</h1>
+
+ <p>This section describes the windows available in Geeqie that can be thought of as general purpose, they are not designed for a specific purpose.</p>
+
+ <p class="gq-other-windows-5">3.1 <a href="3_1_image_window.html">Image Window</a></p>
+
+ <p class="gq-other-windows-5">3.2 <a href="3_2_image_properties.html">Image Properties</a> Window</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-other-windows-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="2_7_status_bar.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-other-windows-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-other-windows-2"><a href="3_1_image_window.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-other-windows-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-other-windows-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-other-windows-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Copy and Move - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041222;16410800">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_image_management.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Copy and Move - Image Management</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_2_rename.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>4.1 Copy and Move</H1>
-<P>To copy an file in Geeqie press Control + C, to move an file press
-Control + M. These operations also appear under File in the main
-menu, and in the context menu of all images and files.</P>
-<P>The Copy and Move operations and dialogs behave the same in
-Geeqie, with the only difference being the final result. The
-remaining text of this page applies equally to the Copy and Move
-operations, for the remainder of this page these will be referred to
-as a Copy/Move operation.</P>
-<P><BR><BR>
-</P>
-<P>Initiating a Copy/Move operation will display a dialog to select
-the destination folder to Copy/Move the selected file, after the
-destination folder is selected Geeqie will proceed to Copy/Move the
-images to the destination. If an error occurs or a file exists with
-the same name as one of the files being Copy/Moved, a dialog will
-appear prompting how to handle the situation.</P>
-<P><BR><BR>
-</P>
-<P><U>The Copy/Move dialog</U></P>
-<P STYLE="margin-left: 0.79in">This is the dialog that is displayed
-when initiating a Copy/Move operation. The dialog contains a row of
-buttons near the top, vertical list of bookmarks along the left side,
-a vertical list of folders in the current path, a text entry field,
-and a row of buttons along the bottom.</P>
-<P STYLE="margin-left: 0.79in"><B>Home button:</B> Activate this
-button to change the active path to your home folder.</P>
-<P STYLE="margin-left: 0.79in"><B>New Folder button:</B> Activate
-this to create a new empty folder as a sub folder of the active path.
-The new folder will appear in the folder list ready for you to type
-in the desired name.</P>
-<P STYLE="margin-left: 0.79in"><B>Show Hidden check box:</B> Enabling
-this check box will cause hidden folders to appear in the folder
-list.</P>
-<P STYLE="margin-left: 0.79in"><B>Bookmark list:</B> This list on the
-left side of the window allows you to save links to folders that are
-frequently used. Activating a bookmark will change the active path to
-that pointed to by the link. To add items to the bookmark list
-highlight a folder and press Control + B, select “Add bookmark”
-from the folder's context menu, or drag a folder onto the bookmark
-list.</P>
-<P STYLE="margin-left: 0.79in">The bookmark has a context menu that
-can be displayed by clicking the right mouse button, or pressing the
-Menu key when a bookmark has the focus. From the context menu you can
-edit a bookmark, move it up or down in the list, or remove the
-bookmark from the list. A bookmark can also be moved by pressing
-Shift + Up or Shift + Down while it has the focus.</P>
-<P STYLE="margin-left: 0.79in"><B>Folder list:</B> This is the list
-that displays the folders contained in the active path. To change the
-active path to a folder displayed in this list double click the
-primary mouse button or highlight the folder with the keyboard and
-press Enter or Space. This list has a context menu that allows
-renaming or bookmarking the selected folder. A folder can also be
-dragged onto the bookmark list to add a bookmark.</P>
-<P STYLE="margin-left: 0.79in"><B>Path entry:</B> This text entry
-displays the active path of the dialog. The path can be directly
-edited using this entry. Tab completion is supported, and the drop
-down arrow will display a list of recently selected folders.</P>
-<P STYLE="margin-left: 0.79in"><B>Copy/Move button:</B> The name of
-this button will differ depending on the selected operation,
-activating it will start the operation with the folder displayed in
-the path entry as the destination.</P>
-<P STYLE="margin-left: 0.79in"><B>Cancel button:</B> Activate this
-button to close the dialog, the operation will be aborted.</P>
-<P><BR><BR>
-</P>
-<P><U>The error dialog</U></P>
-<P STYLE="margin-left: 0.79in">If a problem occurs because Geeqie is
-unable to Copy or Move a selected file a dialog will appear to notify
-the user. The dialog will also ask if the operation should continue
-if one or more files remain to be Copied or Moved.</P>
-<P><BR><BR>
-</P>
-<P><U>The overwrite dialog</U></P>
-<P STYLE="margin-left: 0.79in">If a file with the same name exists in
-the selected destination a dialog will appear to notify the user and
-ask how to resolve the conflict. The dialog will also display the
-source and destination images. The following possible solutions will
-be offered:</P>
-<P STYLE="margin-left: 0.79in"><B>Auto rename:</B> Enabling this
-check box to have Geeqie select a unique name for the destination
-file, the proposed new name will appear in the rename entry field.</P>
-<P STYLE="margin-left: 0.79in"><B>Rename:</B> Enable this check box
-to manually enter a new name for the file.</P>
-<P STYLE="margin-left: 0.79in"><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in"><B>Overwrite:</B> Activate this will
-overwrite the existing file, or rename it if one of the rename check
-boxes are enabled.</P>
-<P STYLE="margin-left: 0.79in"><B>Overwrite all:</B> Activating this
-will perform the same operation as the Yes button, however any
-further file name conflicts will be handled quietly in the same
-method as is selected for the current file.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Skip:</B> This
-button will skip doing anything to the file in question, and resume
-the operation with the next file. The source file will remain
-untouched.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Skip All:</B>
-This will perform the same as the Skip button, however any further
-file name conflicts will be quietly ignored for all remaining files.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Cancel:</B>
-This will close the dialog and stop the operation, all remaining
-files will be ignored.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_image_management.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_2_rename.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Copy and Move - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041222;16410800" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-copy-move-7 {margin-bottom: 0in}
+ p.gq-copy-move-6 {margin-left: 0.79in; font-weight: medium}
+ p.gq-copy-move-5 {margin-left: 0.79in}
+ div.gq-copy-move-4 {text-align: center}
+ table.gq-copy-move-3 {page-break-before: always}
+ p.gq-copy-move-2 {text-align: right}
+ p.gq-copy-move-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-copy-move-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-copy-move-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_image_management.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-copy-move-1">Copy and Move - Image Management</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-copy-move-2"><a href="4_2_rename.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>4.1 Copy and Move</h1>
+
+ <p>To copy an file in Geeqie press Control + C, to move an file press Control + M. These operations also appear under File in the main menu, and in the context menu of all images and files.</p>
+
+ <p>The Copy and Move operations and dialogs behave the same in Geeqie, with the only difference being the final result. The remaining text of this page applies equally to the Copy and Move operations, for the remainder of this page these will be referred to as a Copy/Move operation.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>Initiating a Copy/Move operation will display a dialog to select the destination folder to Copy/Move the selected file, after the destination folder is selected Geeqie will proceed to Copy/Move the images to the destination. If an error occurs or a file exists with the same name as one of the files being Copy/Moved, a dialog will appear prompting how to handle the situation.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>The Copy/Move dialog</u>
+ </p>
+
+ <p class="gq-copy-move-5">This is the dialog that is displayed when initiating a Copy/Move operation. The dialog contains a row of buttons near the top, vertical list of bookmarks along the left side, a vertical list of folders in the current path, a text entry field, and a row of buttons along the bottom.</p>
+
+ <p class="gq-copy-move-5"><b>Home button:</b> Activate this button to change the active path to your home folder.</p>
+
+ <p class="gq-copy-move-5"><b>New Folder button:</b> Activate this to create a new empty folder as a sub folder of the active path. The new folder will appear in the folder list ready for you to type in the desired name.</p>
+
+ <p class="gq-copy-move-5"><b>Show Hidden check box:</b> Enabling this check box will cause hidden folders to appear in the folder list.</p>
+
+ <p class="gq-copy-move-5"><b>Bookmark list:</b> This list on the left side of the window allows you to save links to folders that are frequently used. Activating a bookmark will change the active path to that pointed to by the link. To add items to the bookmark list highlight a folder and press Control + B, select “Add bookmark” from the folder's context menu, or drag a folder onto the bookmark list.</p>
+
+ <p class="gq-copy-move-5">The bookmark has a context menu that can be displayed by clicking the right mouse button, or pressing the Menu key when a bookmark has the focus. From the context menu you can edit a bookmark, move it up or down in the list, or remove the bookmark from the list. A bookmark can also be moved by pressing Shift + Up or Shift + Down while it has the focus.</p>
+
+ <p class="gq-copy-move-5"><b>Folder list:</b> This is the list that displays the folders contained in the active path. To change the active path to a folder displayed in this list double click the primary mouse button or highlight the folder with the keyboard and press Enter or Space. This list has a context menu that allows renaming or bookmarking the selected folder. A folder can also be dragged onto the bookmark list to add a bookmark.</p>
+
+ <p class="gq-copy-move-5"><b>Path entry:</b> This text entry displays the active path of the dialog. The path can be directly edited using this entry. Tab completion is supported, and the drop down arrow will display a list of recently selected folders.</p>
+
+ <p class="gq-copy-move-5"><b>Copy/Move button:</b> The name of this button will differ depending on the selected operation, activating it will start the operation with the folder displayed in the path entry as the destination.</p>
+
+ <p class="gq-copy-move-5"><b>Cancel button:</b> Activate this button to close the dialog, the operation will be aborted.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>The error dialog</u>
+ </p>
+
+ <p class="gq-copy-move-5">If a problem occurs because Geeqie is unable to Copy or Move a selected file a dialog will appear to notify the user. The dialog will also ask if the operation should continue if one or more files remain to be Copied or Moved.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>The overwrite dialog</u>
+ </p>
+
+ <p class="gq-copy-move-5">If a file with the same name exists in the selected destination a dialog will appear to notify the user and ask how to resolve the conflict. The dialog will also display the source and destination images. The following possible solutions will be offered:</p>
+
+ <p class="gq-copy-move-5"><b>Auto rename:</b> Enabling this check box to have Geeqie select a unique name for the destination file, the proposed new name will appear in the rename entry field.</p>
+
+ <p class="gq-copy-move-5"><b>Rename:</b> Enable this check box to manually enter a new name for the file.</p>
+
+ <p class="gq-copy-move-5"><br />
+ <br />
+ </p>
+
+ <p class="gq-copy-move-5"><b>Overwrite:</b> Activate this will overwrite the existing file, or rename it if one of the rename check boxes are enabled.</p>
+
+ <p class="gq-copy-move-5"><b>Overwrite all:</b> Activating this will perform the same operation as the Yes button, however any further file name conflicts will be handled quietly in the same method as is selected for the current file.</p>
+
+ <p class="gq-copy-move-6"><b>Skip:</b> This button will skip doing anything to the file in question, and resume the operation with the next file. The source file will remain untouched.</p>
+
+ <p class="gq-copy-move-6"><b>Skip All:</b> This will perform the same as the Skip button, however any further file name conflicts will be quietly ignored for all remaining files.</p>
+
+ <p class="gq-copy-move-6"><b>Cancel:</b> This will close the dialog and stop the operation, all remaining files will be ignored.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-copy-move-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_image_management.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-copy-move-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-copy-move-2"><a href="4_2_rename.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-copy-move-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-copy-move-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-copy-move-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Rename - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041005;1064200">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_1_copy_move.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Rename - Image Management</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_3_delete.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>4.2 Rename</H1>
-<P>To rename a file in Geeqie press Control + R, or select Rename
-from the File menu. Rename is also available in the context menu of
-all images and files.</P>
-<P>When renaming a file, a dialog will display allowing entry of the
-new name for the file. The dialog will be different depending on the
-number of files selected to be renamed. A simple dialog will appear
-when renaming a single file, however when renaming multiple files the
-dialog will include a list of the file to be renamed and additional
-options.</P>
-<P><BR><BR>
-</P>
-<P><U>Rename single file dialog</U></P>
-<P STYLE="margin-left: 0.79in">The dialog that appears when renaming
-a single file includes an image of the file, an entry to type the new
-name of the file, a Rename button, and a Cancel button. Type the new
-name into the text entry and press Enter or activate the Rename
-button to rename the file. Press Escape or activate the Cancel button
-to close the dialog and abort renaming the file.</P>
-<P STYLE="margin-left: 0.79in">When renaming a file and the new name
-already exists on the file system a dialog will appear showing the
-renamed and existing files. To overwrite the existing file press
-enter or activate the Overwrite button. Press Escape or activate the
-Cancel button to close the dialog abort renaming the file.</P>
-<P STYLE="margin-left: 0.79in"><BR><BR>
-</P>
-<P><U>Rename multiple files dialog</U></P>
-<P STYLE="margin-left: 0.79in">The dialog that appears when renaming
-multiple files includes the list of files to be renamed, a preview
-image of the active file, an entry to enter the new file name, an
-auto rename check box, a Rename button, and a Cancel button.</P>
-<P STYLE="margin-left: 0.79in"><B>Manually enter new file names:</B>
-To manually enter the new name of each file, the active file will be
-displayed in the image preview and it's original name will be
-displayed above the text entry. To rename the file type the new name
-and press Enter or activate the Rename button. When a file is
-successfully renamed it will be removed from the list and the next
-one will become the active file. After all files have been renamed,
-the dialog will close.</P>
-<P STYLE="margin-left: 0.79in">Files do not have to be renamed in the
-order that they appear in the list, highlighting a name in the list
-will make it become the active file.</P>
-<P STYLE="margin-left: 0.79in">When renaming a file and the new name
-already exists on the file system a dialog will appear showing the
-renamed and existing files. To overwrite the existing file press
-enter or activate the Overwrite button. Press Escape or activate the
-Cancel button to return to the original rename dialog, the file that
-prompted the overwrite dialog will remain active.</P>
-<P STYLE="margin-left: 0.79in"><B>Automatic renaming of multiple
-files:</B> To automatically rename the files in the list, enable the
-Auto rename check box. The dialog will change to batch mode for
-numerical naming of files.</P>
-<P STYLE="margin-left: 0.79in">The file name list will change to
-include a preview column that will show the resulting name of each
-file. The text entry will change to three entries; the first
-represents the text that appears in the new names before the number,
-the second will be the start number to use when incrementing the file
-number, and the third represents the text to append to the name after
-the number. The end text should include the file name extension,
-therefore batch renaming multiple types of files (those with
-different extensions) all at once is not recommended.</P>
-<P STYLE="margin-left: 0.79in">The padding number can be used to
-change the minimum length of characters to use for the number portion
-of the new name. When the file number results in fewer characters
-than the padding size, the result will be padded with leading zeros
-to fill the remaining space. For example if padding size is 3, a file
-with the number 24 will appear in the file name as “024”.</P>
-<P STYLE="margin-left: 0.79in">The order of the file list can be
-changed by dragging a name to the desired location within the list.
-The preview column will update to reflect the new order.</P>
-<P STYLE="margin-left: 0.79in">When the preview of new names is
-satisfactory, press Enter or activate the Rename button to rename the
-files to match the name in the preview column. Press Escape or
-activate the Cancel button to close the dialog and abort the rename
-operation.</P>
-<P STYLE="margin-left: 0.79in">If the resulting new names match any
-existing files, a warning dialog will notify you. The rename dialog
-will remain so that you can select a different set of names.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_1_copy_move.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_3_delete.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Rename - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041005;1064200" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-rename-6 {margin-bottom: 0in}
+ p.gq-rename-5 {margin-left: 0.79in}
+ div.gq-rename-4 {text-align: center}
+ table.gq-rename-3 {page-break-before: always}
+ p.gq-rename-2 {text-align: right}
+ p.gq-rename-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-rename-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-rename-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_1_copy_move.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-rename-1">Rename - Image Management</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-rename-2"><a href="4_3_delete.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>4.2 Rename</h1>
+
+ <p>To rename a file in Geeqie press Control + R, or select Rename from the File menu. Rename is also available in the context menu of all images and files.</p>
+
+ <p>When renaming a file, a dialog will display allowing entry of the new name for the file. The dialog will be different depending on the number of files selected to be renamed. A simple dialog will appear when renaming a single file, however when renaming multiple files the dialog will include a list of the file to be renamed and additional options.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Rename single file dialog</u>
+ </p>
+
+ <p class="gq-rename-5">The dialog that appears when renaming a single file includes an image of the file, an entry to type the new name of the file, a Rename button, and a Cancel button. Type the new name into the text entry and press Enter or activate the Rename button to rename the file. Press Escape or activate the Cancel button to close the dialog and abort renaming the file.</p>
+
+ <p class="gq-rename-5">When renaming a file and the new name already exists on the file system a dialog will appear showing the renamed and existing files. To overwrite the existing file press enter or activate the Overwrite button. Press Escape or activate the Cancel button to close the dialog abort renaming the file.</p>
+
+ <p class="gq-rename-5"><br />
+ <br />
+ </p>
+
+ <p><u>Rename multiple files dialog</u>
+ </p>
+
+ <p class="gq-rename-5">The dialog that appears when renaming multiple files includes the list of files to be renamed, a preview image of the active file, an entry to enter the new file name, an auto rename check box, a Rename button, and a Cancel button.</p>
+
+ <p class="gq-rename-5"><b>Manually enter new file names:</b> To manually enter the new name of each file, the active file will be displayed in the image preview and it's original name will be displayed above the text entry. To rename the file type the new name and press Enter or activate the Rename button. When a file is successfully renamed it will be removed from the list and the next one will become the active file. After all files have been renamed, the dialog will close.</p>
+
+ <p class="gq-rename-5">Files do not have to be renamed in the order that they appear in the list, highlighting a name in the list will make it become the active file.</p>
+
+ <p class="gq-rename-5">When renaming a file and the new name already exists on the file system a dialog will appear showing the renamed and existing files. To overwrite the existing file press enter or activate the Overwrite button. Press Escape or activate the Cancel button to return to the original rename dialog, the file that prompted the overwrite dialog will remain active.</p>
+
+ <p class="gq-rename-5"><b>Automatic renaming of multiple files:</b> To automatically rename the files in the list, enable the Auto rename check box. The dialog will change to batch mode for numerical naming of files.</p>
+
+ <p class="gq-rename-5">The file name list will change to include a preview column that will show the resulting name of each file. The text entry will change to three entries; the first represents the text that appears in the new names before the number, the second will be the start number to use when incrementing the file number, and the third represents the text to append to the name after the number. The end text should include the file name extension, therefore batch renaming multiple types of files (those with different extensions) all at once is not recommended.</p>
+
+ <p class="gq-rename-5">The padding number can be used to change the minimum length of characters to use for the number portion of the new name. When the file number results in fewer characters than the padding size, the result will be padded with leading zeros to fill the remaining space. For example if padding size is 3, a file with the number 24 will appear in the file name as “024”.</p>
+
+ <p class="gq-rename-5">The order of the file list can be changed by dragging a name to the desired location within the list. The preview column will update to reflect the new order.</p>
+
+ <p class="gq-rename-5">When the preview of new names is satisfactory, press Enter or activate the Rename button to rename the files to match the name in the preview column. Press Escape or activate the Cancel button to close the dialog and abort the rename operation.</p>
+
+ <p class="gq-rename-5">If the resulting new names match any existing files, a warning dialog will notify you. The rename dialog will remain so that you can select a different set of names.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-rename-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_1_copy_move.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-rename-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-rename-2"><a href="4_3_delete.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-rename-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-rename-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-rename-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Delete - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041004;18015900">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_2_rename.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Delete - Image Management</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_4_external_editing.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>4.3 Delete</H1>
-<P>To delete a file in Geeqie press Control + D, or select Delete
-from the file menu. Delete is also available in the context menu of
-all images and files. If <A HREF="10_6_advanced.html">Enable delete
-key</A> is enabled in Options, pressing the Delete key can also be
-used to delete files.</P>
-<P>The behavior when starting a delete operation depends on the
-<A HREF="10_6_advanced.html">Confirm file delete</A> option in
-Options. If the option is enabled a dialog will appear to confirm the
-operation, if it is not enabled the files will be deleted without
-further interaction. In all cases if the file is unable to be
-deleted you will be notified by a dialog.</P>
-<P><BR><BR>
-</P>
-<P><U>Confirm delete dialog</U></P>
-<P STYLE="margin-left: 0.79in">The dialog that appears when delete
-confirmation is enabled will show the file or files to be deleted. To
-delete the file press Enter or activate the Delete button. Pressing
-Escape or activating the Cancel button will close the dialog and
-abort the operation.</P>
-<P STYLE="margin-left: 0.79in">When deleting multiple files, the
-dialog will include two arrow buttons to step the image preview
-through the list of files to be deleted. Initially the preview will
-be blank, activate the right arrow to display the first file.</P>
-<P STYLE="margin-left: 0.79in">The dialog will also display the
-status of the <A HREF="10_6_advanced.html">Safe Delete</A> feature.
-Use this to determine if a file to be Deleted will be immediately
-lost, or if the file can possibly be recovered from the Safe Delete
-folder.</P>
-<P STYLE="margin-left: 0.79in">If a file is unable to be deleted, a
-dialog will appear to notify you. If multiple files were selected and
-any remain, the dialog will include a Continue button, activating
-this button or pressing Enter will delete the remaining files.
-Pressing Escape or activating the Cancel button will close the dialog
-and the remaining files will not be deleted.</P>
-<P><BR><BR>
-</P>
-<P><U>Safe Delete</U></P>
-<P STYLE="margin-left: 0.79in">Geeqie includes a feature to
-temporarily store deleted files in a selected folder, to use this
-feature enable <A HREF="10_6_advanced.html">Safe Delete</A> on the
-advanced tab of the preferences dialog. Safe Delete includes these
-options:</P>
-<P STYLE="margin-left: 1.58in"><B>Folder:</B> The folder to use for
-temporarily retaining deleted files.</P>
-<P STYLE="margin-left: 1.58in"><B>Maximum size:</B> The maximum
-amount of disk space to use when storing deleted files, in megabytes.</P>
-<P STYLE="margin-left: 0.79in">When the total size of the deleted
-files stored in the Safe Delete folder exceeds the Maximum size, the
-oldest files are removed from the folder to make space for the new
-deleted files. <SPAN STYLE="font-style: normal">Files moved to the
-Safe Delete folder are prefixed with a six digit number in the
-format:</SPAN></P>
-<P STYLE="margin-left: 1.58in"><I>nnnnnn_FILENAME</I></P>
-<P STYLE="margin-left: 0.79in; font-style: normal">This is used to
-distinguish which files to remove first when clearing space for new
-files. The digit counter increments with each deleted file.</P>
-<P STYLE="margin-left: 0.79in; font-style: normal">To clear the
-contents of the Safe Delete folder, activate the Clear button
-provided for this purpose on the <A HREF="10_6_advanced.html">Advanced
-tab</A> in Options.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_2_rename.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_4_external_editing.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Delete - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041004;18015900" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-delete-10 {margin-bottom: 0in}
+ p.gq-delete-9 {margin-left: 0.79in; font-style: normal}
+ p.gq-delete-8 {font-style: italic; margin-left: 1.58in}
+ span.gq-delete-7 {font-style: normal}
+ p.gq-delete-6 {margin-left: 1.58in}
+ p.gq-delete-5 {margin-left: 0.79in}
+ div.gq-delete-4 {text-align: center}
+ table.gq-delete-3 {page-break-before: always}
+ p.gq-delete-2 {text-align: right}
+ p.gq-delete-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-delete-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-delete-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_2_rename.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-delete-1">Delete - Image Management</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-delete-2"><a href="4_4_external_editing.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>4.3 Delete</h1>
+
+ <p>To delete a file in Geeqie press Control + D, or select Delete from the file menu. Delete is also available in the context menu of all images and files. If <a href="10_6_advanced.html">Enable delete key</a> is enabled in Options, pressing the Delete key can also be used to delete files.</p>
+
+ <p>The behavior when starting a delete operation depends on the <a href="10_6_advanced.html">Confirm file delete</a> option in Options. If the option is enabled a dialog will appear to confirm the operation, if it is not enabled the files will be deleted without further interaction. In all cases if the file is unable to be deleted you will be notified by a dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Confirm delete dialog</u>
+ </p>
+
+ <p class="gq-delete-5">The dialog that appears when delete confirmation is enabled will show the file or files to be deleted. To delete the file press Enter or activate the Delete button. Pressing Escape or activating the Cancel button will close the dialog and abort the operation.</p>
+
+ <p class="gq-delete-5">When deleting multiple files, the dialog will include two arrow buttons to step the image preview through the list of files to be deleted. Initially the preview will be blank, activate the right arrow to display the first file.</p>
+
+ <p class="gq-delete-5">The dialog will also display the status of the <a href="10_6_advanced.html">Safe Delete</a> feature. Use this to determine if a file to be Deleted will be immediately lost, or if the file can possibly be recovered from the Safe Delete folder.</p>
+
+ <p class="gq-delete-5">If a file is unable to be deleted, a dialog will appear to notify you. If multiple files were selected and any remain, the dialog will include a Continue button, activating this button or pressing Enter will delete the remaining files. Pressing Escape or activating the Cancel button will close the dialog and the remaining files will not be deleted.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Safe Delete</u>
+ </p>
+
+ <p class="gq-delete-5">Geeqie includes a feature to temporarily store deleted files in a selected folder, to use this feature enable <a href="10_6_advanced.html">Safe Delete</a> on the advanced tab of the preferences dialog. Safe Delete includes these options:</p>
+
+ <p class="gq-delete-6"><b>Folder:</b> The folder to use for temporarily retaining deleted files.</p>
+
+ <p class="gq-delete-6"><b>Maximum size:</b> The maximum amount of disk space to use when storing deleted files, in megabytes.</p>
+
+ <p class="gq-delete-5">When the total size of the deleted files stored in the Safe Delete folder exceeds the Maximum size, the oldest files are removed from the folder to make space for the new deleted files. <span class="gq-delete-7">Files moved to the Safe Delete folder are prefixed with a six digit number in the format:</span></p>
+
+ <p class="gq-delete-8">nnnnnn_FILENAME</p>
+
+ <p class="gq-delete-9">This is used to distinguish which files to remove first when clearing space for new files. The digit counter increments with each deleted file.</p>
+
+ <p class="gq-delete-9">To clear the contents of the Safe Delete folder, activate the Clear button provided for this purpose on the <a href="10_6_advanced.html">Advanced tab</a> in Options.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-delete-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_2_rename.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-delete-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-delete-2"><a href="4_4_external_editing.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-delete-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-delete-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-delete-10"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>External Editing - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041004;19232900">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_3_delete.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>External Editing - Image Management</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="5_image_search.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>4.4 External Editing</H1>
-<P>Geeqie provides the ability to execute commands, such as running
-an image editor, on a selected image. In Geeqie these are called the
-external editing commands.</P>
-<P>These commands are executed by pressing Control and a number key,
-from the Edit menu, or from the context menu available to all images
-and files. The keyboards shortcuts are Control + 1 through Control +
-9, and Control + 0, they correspond respectively to commands 1
-through 10 on the <A HREF="10_5_editor_commands.html">Editors tab</A>
-in Options.</P>
-<P>To edit the command list refer to section 10.5 <A HREF="10_5_editor_commands.html">Editor
-Commands</A>.</P>
-<P><BR><BR>
-</P>
-<P><U>Result dialog</U></P>
-<P STYLE="margin-left: 0.79in">Commands that are set to display the
-command's output in a window will show a dialog when the command is
-executed.</P>
-<P STYLE="margin-left: 0.79in">To specify a command to show a dialog
-begin the command with the %V or %v macros, details for these an all
-macros are listed on the <A HREF="10_5_editor_commands.html">Editors
-tab</A> in Options.</P>
-<P STYLE="margin-left: 0.79in">The result dialog will display the
-command's text output. If the editor command will result in multiple
-runs of the same command for each file, the Stop button will be
-enabled, activate it to stop Geeqie from executing the command for
-remaining files.</P>
-<P STYLE="margin-left: 0.79in">Once all commands have completed or if
-the Stop button was activated and the pending command has completed,
-the Close button will be enabled, activate it or press Escape to
-close the result dialog. The result dialog can not be closed while a
-command is still running.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_3_delete.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="5_image_search.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>External Editing - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041004;19232900" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-external-editing-6 {margin-bottom: 0in}
+ p.gq-external-editing-5 {margin-left: 0.79in}
+ div.gq-external-editing-4 {text-align: center}
+ table.gq-external-editing-3 {page-break-before: always}
+ p.gq-external-editing-2 {text-align: right}
+ p.gq-external-editing-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-external-editing-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-external-editing-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_3_delete.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-external-editing-1">External Editing - Image Management</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-external-editing-2"><a href="5_image_search.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>4.4 External Editing</h1>
+
+ <p>Geeqie provides the ability to execute commands, such as running an image editor, on a selected image. In Geeqie these are called the external editing commands.</p>
+
+ <p>These commands are executed by pressing Control and a number key, from the Edit menu, or from the context menu available to all images and files. The keyboards shortcuts are Control + 1 through Control + 9, and Control + 0, they correspond respectively to commands 1 through 10 on the <a href="10_5_editor_commands.html">Editors tab</a> in Options.</p>
+
+ <p>To edit the command list refer to section 10.5 <a href="10_5_editor_commands.html">Editor Commands</a>.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Result dialog</u>
+ </p>
+
+ <p class="gq-external-editing-5">Commands that are set to display the command's output in a window will show a dialog when the command is executed.</p>
+
+ <p class="gq-external-editing-5">To specify a command to show a dialog begin the command with the %V or %v macros, details for these an all macros are listed on the <a href="10_5_editor_commands.html">Editors tab</a> in Options.</p>
+
+ <p class="gq-external-editing-5">The result dialog will display the command's text output. If the editor command will result in multiple runs of the same command for each file, the Stop button will be enabled, activate it to stop Geeqie from executing the command for remaining files.</p>
+
+ <p class="gq-external-editing-5">Once all commands have completed or if the Stop button was activated and the pending command has completed, the Close button will be enabled, activate it or press Escape to close the result dialog. The result dialog can not be closed while a command is still running.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-external-editing-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_3_delete.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-external-editing-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-external-editing-2"><a href="5_image_search.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-external-editing-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-external-editing-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-external-editing-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Image Management - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041004;14414700">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="3_2_image_properties.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Image Management</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_1_copy_move.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>4. Image Management</H1>
-<P>Geeqie includes a set of utilities to copy, move, rename, and
-delete images.</P>
-<P STYLE="margin-left: 0.79in">4.1 <A HREF="4_1_copy_move.html">Copy
-and Move</A></P>
-<P STYLE="margin-left: 0.79in">4.2 <A HREF="4_2_rename.html">Rename</A></P>
-<P STYLE="margin-left: 0.79in">4.3 <A HREF="4_3_delete.html">Delete</A></P>
-<P STYLE="margin-left: 0.79in">4.4 <A HREF="4_4_external_editing.html">External
-Editing</A></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="3_2_image_properties.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="4_1_copy_move.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Image Management - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041004;14414700" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-image-management-6 {margin-bottom: 0in}
+ p.gq-image-management-5 {margin-left: 0.79in}
+ div.gq-image-management-4 {text-align: center}
+ table.gq-image-management-3 {page-break-before: always}
+ p.gq-image-management-2 {text-align: right}
+ p.gq-image-management-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-image-management-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-image-management-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="3_2_image_properties.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-management-1">Image Management</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-management-2"><a href="4_1_copy_move.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>4. Image Management</h1>
+
+ <p>Geeqie includes a set of utilities to copy, move, rename, and delete images.</p>
+
+ <p class="gq-image-management-5">4.1 <a href="4_1_copy_move.html">Copy and Move</a></p>
+
+ <p class="gq-image-management-5">4.2 <a href="4_2_rename.html">Rename</a></p>
+
+ <p class="gq-image-management-5">4.3 <a href="4_3_delete.html">Delete</a></p>
+
+ <p class="gq-image-management-5">4.4 <a href="4_4_external_editing.html">External Editing</a></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-image-management-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="3_2_image_properties.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-management-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-management-2"><a href="4_1_copy_move.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-management-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-management-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-image-management-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Search Window - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041227;15443800">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="5_image_search.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Search Window - Image Search</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="5_2_finding_duplicates.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>5.1 Search Window</H1>
-<P>Geeqie provides a utility to find one or more images based on
-various parameters.</P>
-<P>To display a new Search Window press F3 or select Search from the
-File menu.</P>
-<P><BR><BR>
-</P>
-<P>To start a search activate the Find button. A search in progress
-can be stopped by activating the Stop button.</P>
-<P>The progress of an active search is displayed as a progress bar at
-the bottom of the window. The progress bar will also display the
-total files that match the search parameters, and the total number of
-files searched.</P>
-<P>When a search is completed, the total number of files found and
-their total size will be displayed in the status bar.</P>
-<P><BR><BR>
-</P>
-<P><U>Search location</U></P>
-<P STYLE="margin-left: 0.79in">One of several locations can be chosen
-as the source to use in the search.</P>
-<P STYLE="margin-left: 0.79in"><B>Path:</B> The search will include
-files located in the selected folder, enable the Recurse check box to
-include the contents of all sub folders.</P>
-<P STYLE="margin-left: 0.79in"><B>Comments:</B> The search will
-include all files that have a keyword or comment associated to it.</P>
-<P STYLE="margin-left: 1.58in">Note: Only keyword and comment
-associations stored in the user's home folder are included in this
-search type.</P>
-<P STYLE="margin-left: 0.79in"><B>Results:</B> The search will
-include all files currently listed in the results list, use this to
-refine a previous search.</P>
-<P><BR><BR>
-</P>
-<P><U>Search parameters</U></P>
-<P STYLE="margin-left: 0.79in">Each search parameter can be enabled
-or disabled with the check box to it's left. For a file to be a
-match, all enabled parameters must be true.</P>
-<P STYLE="margin-left: 0.79in"><B>File name:</B> The search will
-match if the entered text appears within the file name, or if the
-text exactly matches the file name, depending on the method selected
-from the drop down menu. The text comparison can be made to be case
-sensitive by enabling the Match case checkbox.</P>
-<P STYLE="margin-left: 0.79in"><B>File size:</B> The search will
-match if the file size on disk is equal to, less than, greater than,
-or between the entered value, depending on the method selected from
-the drop down menu. The between test is inclusive, for example a file
-of size 10 will match if the size parameters are between 10 and 15.</P>
-<P STYLE="margin-left: 0.79in"><B>File date:</B> The search will
-match if the file modification time on disk is equal to, before,
-after, or between the entered date, depending on the method selected
-from the drop down menu. The between test is inclusive, for example a
-file with date of 10/04/2003 will match if the date parameters are
-between 10/04/2003 and 12/31/2003.</P>
-<P STYLE="margin-left: 0.79in">For convenience, the button with the
-down arrow displays a pop up calendar to enter the date.</P>
-<P STYLE="margin-left: 0.79in"><B>Image dimensions:</B> The search
-will match if the image dimensions are equal to, less than, greater
-than, or between the entered values, depending on the method selected
-from the drop down menu. The between test is inclusive.</P>
-<P STYLE="margin-left: 0.79in">The image dimensions test is simple,
-both width and height must be within the allowed values for a match.</P>
-<P STYLE="margin-left: 0.79in"><B>Image content:</B> The search will
-match if the image contents are similar within the percentage value,
-inclusive. This uses the same test and data that is used to determine
-image similarity when <A HREF="5_2_finding_duplicates.html">Finding
-Duplicates</A>. The entry is for entering the path for the image to
-use in this test.</P>
-<P STYLE="margin-left: 0.79in"><B>Keywords:</B> The search will match
-if the file's associated keywords match all, match any, or exclude
-the entered keywords, depending on the method selected from the drop
-down menu. Keywords can be separated with a space, comma, or tab
-character.</P>
-<P><BR><BR>
-</P>
-<P><U>Results list</U></P>
-<P STYLE="margin-left: 0.79in">Files that match the parameters of the
-search are shown in the list. By default they are displayed in the
-order that they are found, to sort the results list by a column
-activate or click the column title. Activating a column that is
-already used to sort the list will toggle between increasing and
-decreasing sort order.</P>
-<P STYLE="margin-left: 0.79in">A <B>context menu</B> is available for
-the result list by right clicking the mouse or pressing the Menu key
-when a row has the focus.</P>
-<P STYLE="margin-left: 0.79in"><B>Keyboard shortcuts</B> available in
-the results list:</P>
-<CENTER>
- <TABLE WIDTH=80% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=2 CELLSPACING=0>
- <COL WIDTH=64*>
- <COL WIDTH=64*>
- <COL WIDTH=128*>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><B>Shortcut</B></P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><B>Context menu name</B></P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER><B>Description</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Enter</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>View</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens selected image in main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>V</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>View in new window</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens selected image in a new window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + A</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Select all</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Selects all images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + Shift + A</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Select none</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Clear the image selection.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + 1 through<BR>Control + 0</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Edit sub menu</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Executes the respective editor command.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + P</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Properties</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens a properties window for selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>C</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Add to new collection</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Creates a new collection containing the selected
- images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Print</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens a print dialog for selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + C</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Copy</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Copy selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + M</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Move</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Move selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + R</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Rename</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Rename selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + D</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Delete</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Delete selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Delete</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Remove</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Remove selected images from result list.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + Delete</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Clear</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Cleared the result list.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Menu</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Displays the context menu.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + T</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Toggle display of thumbnails.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + W</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Close window.</P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">The <B>selection</B> can be changed
-using the keyboard and mouse the same as in a <A HREF="2_4_file_pane.html">file
-pane</A> of the main window.</P>
-<P STYLE="margin-left: 0.79in">The image Dimensions column of the
-result list will only contain dimension information when dimensions
-are included in the search parameters.</P>
-<P><BR><BR>
-</P>
-<P><U>Status bar</U></P>
-<P STYLE="margin-left: 0.79in">At the bottom of the search window is
-an area that includes the following items from left to right:</P>
-<P STYLE="margin-left: 0.79in"><B>Thumbnails:</B> Enable this check
-box to display a thumbnail next to each image in the results list.</P>
-<P STYLE="margin-left: 0.79in"><B>File count display:</B> Displays
-the total count of files in the results list, and their size on disk.
-The count of selected files will appear in parenthesis.</P>
-<P STYLE="margin-left: 0.79in"><B>Search progress:</B> When a search
-is active, the text “Searching...” will appear here. Two
-numbers in parenthesis will also be displayed, the first number is
-the number of files that match the search parameters and the second
-number is the total number of files that were searched.</P>
-<P STYLE="margin-left: 0.79in"><B>Find:</B> Activate the find button
-to start a search with the selected parameters.</P>
-<P STYLE="margin-left: 0.79in"><B>Stop:</B> Activate the stop button
-to end a search that is in progress.</P>
-<P><BR><BR>
-</P>
-<P><U>Drag and Drop</U></P>
-<P STYLE="margin-left: 0.79in">Drag and drop can be initiated with
-the primary or middle mouse buttons. Dragging a file that is selected
-will include all selected files in the drag. Dragging a file that is
-not selected will first change the selection to the dragged file, and
-clear the previous selection.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="5_image_search.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="5_2_finding_duplicates.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Search Window - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041227;15443800" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-search-8 {margin-bottom: 0in}
+ p.gq-search-7 {font-weight: bold; text-align: center}
+ p.gq-search-6 {margin-left: 1.58in}
+ p.gq-search-5 {margin-left: 0.79in}
+ div.gq-search-4 {text-align: center}
+ table.gq-search-3 {page-break-before: always}
+ p.gq-search-2 {text-align: right}
+ p.gq-search-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr">
+ <div class="gq-search-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-search-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="5_image_search.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-search-1">Search Window - Image Search</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-search-2"><a href="5_2_finding_duplicates.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>5.1 Search Window</h1>
+
+ <p>Geeqie provides a utility to find one or more images based on various parameters.</p>
+
+ <p>To display a new Search Window press F3 or select Search from the File menu.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>To start a search activate the Find button. A search in progress can be stopped by activating the Stop button.</p>
+
+ <p>The progress of an active search is displayed as a progress bar at the bottom of the window. The progress bar will also display the total files that match the search parameters, and the total number of files searched.</p>
+
+ <p>When a search is completed, the total number of files found and their total size will be displayed in the status bar.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Search location</u>
+ </p>
+
+ <p class="gq-search-5">One of several locations can be chosen as the source to use in the search.</p>
+
+ <p class="gq-search-5"><b>Path:</b> The search will include files located in the selected folder, enable the Recurse check box to include the contents of all sub folders.</p>
+
+ <p class="gq-search-5"><b>Comments:</b> The search will include all files that have a keyword or comment associated to it.</p>
+
+ <p class="gq-search-6">Note: Only keyword and comment associations stored in the user's home folder are included in this search type.</p>
+
+ <p class="gq-search-5"><b>Results:</b> The search will include all files currently listed in the results list, use this to refine a previous search.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Search parameters</u>
+ </p>
+
+ <p class="gq-search-5">Each search parameter can be enabled or disabled with the check box to it's left. For a file to be a match, all enabled parameters must be true.</p>
+
+ <p class="gq-search-5"><b>File name:</b> The search will match if the entered text appears within the file name, or if the text exactly matches the file name, depending on the method selected from the drop down menu. The text comparison can be made to be case sensitive by enabling the Match case checkbox.</p>
+
+ <p class="gq-search-5"><b>File size:</b> The search will match if the file size on disk is equal to, less than, greater than, or between the entered value, depending on the method selected from the drop down menu. The between test is inclusive, for example a file of size 10 will match if the size parameters are between 10 and 15.</p>
+
+ <p class="gq-search-5"><b>File date:</b> The search will match if the file modification time on disk is equal to, before, after, or between the entered date, depending on the method selected from the drop down menu. The between test is inclusive, for example a file with date of 10/04/2003 will match if the date parameters are between 10/04/2003 and 12/31/2003.</p>
+
+ <p class="gq-search-5">For convenience, the button with the down arrow displays a pop up calendar to enter the date.</p>
+
+ <p class="gq-search-5"><b>Image dimensions:</b> The search will match if the image dimensions are equal to, less than, greater than, or between the entered values, depending on the method selected from the drop down menu. The between test is inclusive.</p>
+
+ <p class="gq-search-5">The image dimensions test is simple, both width and height must be within the allowed values for a match.</p>
+
+ <p class="gq-search-5"><b>Image content:</b> The search will match if the image contents are similar within the percentage value, inclusive. This uses the same test and data that is used to determine image similarity when <a href="5_2_finding_duplicates.html">Finding Duplicates</a>. The entry is for entering the path for the image to use in this test.</p>
+
+ <p class="gq-search-5"><b>Keywords:</b> The search will match if the file's associated keywords match all, match any, or exclude the entered keywords, depending on the method selected from the drop down menu. Keywords can be separated with a space, comma, or tab character.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Results list</u>
+ </p>
+
+ <p class="gq-search-5">Files that match the parameters of the search are shown in the list. By default they are displayed in the order that they are found, to sort the results list by a column activate or click the column title. Activating a column that is already used to sort the list will toggle between increasing and decreasing sort order.</p>
+
+ <p class="gq-search-5">A <b>context menu</b> is available for the result list by right clicking the mouse or pressing the Menu key when a row has the focus.</p>
+
+ <p class="gq-search-5"><b>Keyboard shortcuts</b> available in the results list:</p>
+
+ <div class="gq-search-4">
+ <table width="80%" border="1" cellpadding="2" cellspacing="0">
+ <col width="64*" />
+ <col width="64*" />
+ <col width="128*" />
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-7">Shortcut</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-7">Context menu name</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-7">Description</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Enter</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">View</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Opens selected image in main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">V</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">View in new window</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Opens selected image in a new window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + A</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Select all</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Selects all images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + Shift + A</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Select none</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Clear the image selection.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + 1 through<br />
+ Control + 0</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Edit sub menu</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Executes the respective editor command.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + P</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Properties</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Opens a properties window for selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">C</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Add to new collection</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Creates a new collection containing the selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1"><br />
+ </p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Print</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Opens a print dialog for selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + C</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Copy</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Copy selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + M</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Move</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Move selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + R</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Rename</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Rename selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + D</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Delete</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Delete selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Delete</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Remove</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Remove selected images from result list.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + Delete</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1">Clear</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Cleared the result list.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Menu</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1"><br />
+ </p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Displays the context menu.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + T</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1"><br />
+ </p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Toggle display of thumbnails.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-search-1">Control + W</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-search-1"><br />
+ </p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-search-1">Close window.</p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-search-5">The <b>selection</b> can be changed using the keyboard and mouse the same as in a <a href="2_4_file_pane.html">file pane</a> of the main window.</p>
+
+ <p class="gq-search-5">The image Dimensions column of the result list will only contain dimension information when dimensions are included in the search parameters.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Status bar</u>
+ </p>
+
+ <p class="gq-search-5">At the bottom of the search window is an area that includes the following items from left to right:</p>
+
+ <p class="gq-search-5"><b>Thumbnails:</b> Enable this check box to display a thumbnail next to each image in the results list.</p>
+
+ <p class="gq-search-5"><b>File count display:</b> Displays the total count of files in the results list, and their size on disk. The count of selected files will appear in parenthesis.</p>
+
+ <p class="gq-search-5"><b>Search progress:</b> When a search is active, the text “Searching...” will appear here. Two numbers in parenthesis will also be displayed, the first number is the number of files that match the search parameters and the second number is the total number of files that were searched.</p>
+
+ <p class="gq-search-5"><b>Find:</b> Activate the find button to start a search with the selected parameters.</p>
+
+ <p class="gq-search-5"><b>Stop:</b> Activate the stop button to end a search that is in progress.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Drag and Drop</u>
+ </p>
+
+ <p class="gq-search-5">Drag and drop can be initiated with the primary or middle mouse buttons. Dragging a file that is selected will include all selected files in the drag. Dragging a file that is not selected will first change the selection to the dragged file, and clear the previous selection.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-search-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="5_image_search.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-search-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-search-2"><a href="5_2_finding_duplicates.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-search-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-search-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-search-8"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Finding Duplicates - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041227;15451200">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="5_1_search.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Finding Duplicates - Image Search</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="6_collections.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>5.2 Finding Duplicates</H1>
-<P>Geeqie provides a utility to find images that have similar
-attributes or content.</P>
-<P>To display a new Find Duplicates Window press D or select Find
-duplicates from the File menu.</P>
-<P><BR><BR>
-</P>
-<P><U>Adding files to be compared</U></P>
-<P STYLE="margin-left: 0.79in">Add files to be compared using drag
-and drop. Drop files or folders onto the Find Duplicates window to
-add them to the list of files to compare. When one or more folders
-are dropped onto the window a menu will appear allowing you to choose
-the desired action:</P>
-<P STYLE="margin-left: 1.58in"><B>Add contents:</B> The contents of
-dropped folders will added to the window. <BR><B>Add contents
-recursive:</B> The contents of dropped folders and all sub folders
-will be added to the window.<BR><B>Skip folders:</B> Ignore folders
-contained in the drop list.</P>
-<P STYLE="margin-left: 0.79in">When files are added to the window,
-the comparison is restarted to include the new files.</P>
-<P><BR><BR>
-</P>
-<P><U>Comparison methods</U></P>
-<P STYLE="margin-left: 0.79in">The attribute to use for two images to
-match can be selected with the “Compare by:” drop down
-menu. Each method is explained below:</P>
-<P STYLE="margin-left: 0.79in"><B>Name:</B> The file name.</P>
-<P STYLE="margin-left: 0.79in"><B>Size:</B> The file size.</P>
-<P STYLE="margin-left: 0.79in"><B>Date:</B> The file date.</P>
-<P STYLE="margin-left: 0.79in"><B>Dimensions:</B> The image
-dimensions.</P>
-<P STYLE="margin-left: 0.79in"><B>Checksum:</B> The MD5 file
-checksum.</P>
-<P STYLE="margin-left: 0.79in"><B>Path:</B> The complete path to
-file.</P>
-<P STYLE="margin-left: 0.79in"><B>Similarity (high):</B> Very similar
-image content.</P>
-<P STYLE="margin-left: 0.79in"><B>Similarity:</B> Similar image
-content.</P>
-<P STYLE="margin-left: 0.79in"><B>Similarity (low):</B> Slightly
-similar image content.</P>
-<P STYLE="margin-left: 0.79in"><B>Similarity (custom):</B> Similar
-image content, the value to use to consider two images a match is
-configured in the <A HREF="10_6_advanced.html">Advanced tab</A> of
-the preferences dialog by setting the “Custom similarity
-threshold”.</P>
-<P><BR><BR>
-</P>
-<P><U>Results list</U></P>
-<P STYLE="margin-left: 0.79in">Files that match with the selected
-comparison method will appear in the list. Matching files are grouped
-in alternating color.</P>
-<P STYLE="margin-left: 0.79in">The order of the result list can not
-be changed, files will appear in the order of the search. When
-comparing by image content similarity, the matching groups will be
-sorted by order of rank starting with the files that are most
-similar.</P>
-<P STYLE="margin-left: 0.79in">A <B>context menu</B> is available for
-the result list by right clicking the mouse or pressing the Menu key
-when a row has the focus.</P>
-<P STYLE="margin-left: 0.79in"><B>Keyboard shortcuts</B> available in
-the results list:</P>
-<CENTER>
- <TABLE WIDTH=80% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=2 CELLSPACING=0>
- <COL WIDTH=64*>
- <COL WIDTH=64*>
- <COL WIDTH=128*>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><B>Shortcut</B></P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><B>Context menu name</B></P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER><B>Description</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Enter</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>View</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens selected image in main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>V</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>View in new window</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens selected image in a new window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + A</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Select all</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Selects all images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + Shift + A</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Select none</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Clear the image selection.</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=25% VALIGN=BOTTOM SDVAL="1" SDNUM="1033;">
- <P ALIGN=CENTER>1</P>
- </TD>
- <TD WIDTH=25% VALIGN=TOP>
- <P ALIGN=CENTER>Select group 1 duplicates</P>
- </TD>
- <TD WIDTH=50% VALIGN=TOP>
- <P ALIGN=CENTER>Selects the first image from each match group.</P>
- </TD>
- </TR>
- <TR>
- <TD WIDTH=25% VALIGN=BOTTOM SDVAL="2" SDNUM="1033;">
- <P ALIGN=CENTER>2</P>
- </TD>
- <TD WIDTH=25% VALIGN=TOP>
- <P ALIGN=CENTER>Select group 2 duplicates</P>
- </TD>
- <TD WIDTH=50% VALIGN=TOP>
- <P ALIGN=CENTER>Selects all but the first image from each match
- group.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + 1 through<BR>Control + 0</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Edit sub menu</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Executes the respective editor command.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + P</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Properties</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens a properties window for selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>C</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Add to new collection</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Creates a new collection containing the selected
- images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Print</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens a print dialog for selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + C</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Copy</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Copy selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + M</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Move</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Move selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + R</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Rename</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Rename selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + D</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Delete</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Delete selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Delete</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Remove</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Remove selected images from result list.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + Delete</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Clear</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Cleared the result list.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Menu</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Displays the context menu.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + T</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Toggle display of thumbnails.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + W</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Close window.</P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P STYLE="margin-left: 0.79in"><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">The <B>selection</B> can be changed
-using the keyboard and mouse the same as in a <A HREF="2_4_file_pane.html">file
-pane</A> of the main window.</P>
-<P STYLE="margin-left: 0.79in">The image Dimensions column of the
-result list will only contain dimension information when comparing by
-dimensions, or when the data is easily available from memory or has
-been read from the cache.</P>
-<P><BR><BR>
-</P>
-<P><U>Status bar</U></P>
-<P STYLE="margin-left: 0.79in">Along the bottom of the Find
-Duplicates window is an area that displays the count of files
-contained in the window, and the number of files in the result list.</P>
-<P STYLE="margin-left: 0.79in">The status bar will also display the
-status of an active compare operation using the progress bar. A
-compare operation involves 2 or 3 stages, depending on the type of
-comparison. These are the stages in order:</P>
-<P STYLE="margin-left: 1.58in">1) If necessary, extra data is read
-into memory for the comparison stage, the progress bar will indicate
-this stage with text that resembles “reading dimensions...”,
-“reading checksums...”, or “reading similarity
-data...”. <BR>2) The images are compared using the selected
-method, the progress bar will indicate this stage with the text
-“comparing...”.<BR>3) The results are sorted for display,
-the progress bar will indicate this stage with the text “sorting...”.</P>
-<P STYLE="margin-left: 0.79in">Stage 1 is only used for the
-Dimensions, Checksum, and Similarity compare methods.</P>
-<P STYLE="margin-left: 0.79in">If the time to complete a stage will
-be significant, an estimated time to completion will also be
-displayed in the progress bar. The estimated time only refers to the
-current stage, other stages are not included in the estimate. The
-time estimate is displayed using the format MINUTES:SECONDS.</P>
-<P><BR><BR>
-</P>
-<P><U>Thumbnails</U></P>
-<P STYLE="margin-left: 0.79in">Thumbnails can be displayed beside
-each image in the result list by enabling the Thumbnails check box.</P>
-<P><BR><BR>
-</P>
-<P><U>Compare two file sets</U></P>
-<P STYLE="margin-left: 0.79in">Sometimes it is useful to compare one
-group of files to another, different group of files. Enable this
-check box to compare two groups of files. When enabled a second list
-will appear, files can be added to this list using the same methods
-for the main list.</P>
-<P STYLE="margin-left: 0.79in">When comparing two file sets the
-results list will display matches between the two lists. For each
-match group, the first file is always from the main group, and the
-remaining files are always from the second group.</P>
-<P><BR><BR>
-</P>
-<P><U>Drag and Drop</U></P>
-<P STYLE="margin-left: 0.79in">Drag and drop can be initiated with
-the primary or middle mouse buttons. Dragging a file that is selected
-will include all selected files in the drag. Dragging a file that is
-not selected will first change the selection to the dragged file, and
-clear the previous selection.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="5_1_search.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="6_collections.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Finding Duplicates - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041227;15451200" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-finding-duplicates-8 {margin-bottom: 0in}
+ p.gq-finding-duplicates-7 {font-weight: bold; text-align: center}
+ p.gq-finding-duplicates-6 {margin-left: 1.58in}
+ p.gq-finding-duplicates-5 {margin-left: 0.79in}
+ div.gq-finding-duplicates-4 {text-align: center}
+ table.gq-finding-duplicates-3 {page-break-before: always}
+ p.gq-finding-duplicates-2 {text-align: right}
+ p.gq-finding-duplicates-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr">
+ <div class="gq-finding-duplicates-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-finding-duplicates-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="5_1_search.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-finding-duplicates-1">Finding Duplicates - Image Search</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-finding-duplicates-2"><a href="6_collections.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>5.2 Finding Duplicates</h1>
+
+ <p>Geeqie provides a utility to find images that have similar attributes or content.</p>
+
+ <p>To display a new Find Duplicates Window press D or select Find duplicates from the File menu.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Adding files to be compared</u>
+ </p>
+
+ <p class="gq-finding-duplicates-5">Add files to be compared using drag and drop. Drop files or folders onto the Find Duplicates window to add them to the list of files to compare. When one or more folders are dropped onto the window a menu will appear allowing you to choose the desired action:</p>
+
+ <p class="gq-finding-duplicates-6"><b>Add contents:</b> The contents of dropped folders will added to the window.<br />
+ <b>Add contents recursive:</b> The contents of dropped folders and all sub folders will be added to the window.<br />
+ <b>Skip folders:</b> Ignore folders contained in the drop list.</p>
+
+ <p class="gq-finding-duplicates-5">When files are added to the window, the comparison is restarted to include the new files.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Comparison methods</u>
+ </p>
+
+ <p class="gq-finding-duplicates-5">The attribute to use for two images to match can be selected with the “Compare by:” drop down menu. Each method is explained below:</p>
+
+ <p class="gq-finding-duplicates-5"><b>Name:</b> The file name.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Size:</b> The file size.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Date:</b> The file date.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Dimensions:</b> The image dimensions.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Checksum:</b> The MD5 file checksum.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Path:</b> The complete path to file.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Similarity (high):</b> Very similar image content.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Similarity:</b> Similar image content.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Similarity (low):</b> Slightly similar image content.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Similarity (custom):</b> Similar image content, the value to use to consider two images a match is configured in the <a href="10_6_advanced.html">Advanced tab</a> of the preferences dialog by setting the “Custom similarity threshold”.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Results list</u>
+ </p>
+
+ <p class="gq-finding-duplicates-5">Files that match with the selected comparison method will appear in the list. Matching files are grouped in alternating color.</p>
+
+ <p class="gq-finding-duplicates-5">The order of the result list can not be changed, files will appear in the order of the search. When comparing by image content similarity, the matching groups will be sorted by order of rank starting with the files that are most similar.</p>
+
+ <p class="gq-finding-duplicates-5">A <b>context menu</b> is available for the result list by right clicking the mouse or pressing the Menu key when a row has the focus.</p>
+
+ <p class="gq-finding-duplicates-5"><b>Keyboard shortcuts</b> available in the results list:</p>
+
+ <div class="gq-finding-duplicates-4">
+ <table width="80%" border="1" cellpadding="2" cellspacing="0">
+ <col width="64*" />
+ <col width="64*" />
+ <col width="128*" />
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-7">Shortcut</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-7">Context menu name</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-7">Description</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Enter</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">View</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Opens selected image in main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">V</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">View in new window</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Opens selected image in a new window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + A</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Select all</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Selects all images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + Shift + A</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Select none</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Clear the image selection.</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="25%" valign="bottom">
+ <p class="gq-finding-duplicates-1">1</p>
+ </td>
+
+ <td width="25%" valign="top">
+ <p class="gq-finding-duplicates-1">Select group 1 duplicates</p>
+ </td>
+
+ <td width="50%" valign="top">
+ <p class="gq-finding-duplicates-1">Selects the first image from each match group.</p>
+ </td>
+ </tr>
+
+ <tr>
+ <td width="25%" valign="bottom">
+ <p class="gq-finding-duplicates-1">2</p>
+ </td>
+
+ <td width="25%" valign="top">
+ <p class="gq-finding-duplicates-1">Select group 2 duplicates</p>
+ </td>
+
+ <td width="50%" valign="top">
+ <p class="gq-finding-duplicates-1">Selects all but the first image from each match group.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + 1 through<br />
+ Control + 0</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Edit sub menu</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Executes the respective editor command.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + P</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Properties</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Opens a properties window for selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">C</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Add to new collection</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Creates a new collection containing the selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1"><br />
+ </p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Print</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Opens a print dialog for selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + C</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Copy</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Copy selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + M</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Move</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Move selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + R</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Rename</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Rename selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + D</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Delete</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Delete selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Delete</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Remove</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Remove selected images from result list.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + Delete</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Clear</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Cleared the result list.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Menu</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1"><br />
+ </p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Displays the context menu.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + T</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1"><br />
+ </p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Toggle display of thumbnails.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-finding-duplicates-1">Control + W</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-finding-duplicates-1"><br />
+ </p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-finding-duplicates-1">Close window.</p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p class="gq-finding-duplicates-5"><br />
+ <br />
+ </p>
+
+ <p class="gq-finding-duplicates-5">The <b>selection</b> can be changed using the keyboard and mouse the same as in a <a href="2_4_file_pane.html">file pane</a> of the main window.</p>
+
+ <p class="gq-finding-duplicates-5">The image Dimensions column of the result list will only contain dimension information when comparing by dimensions, or when the data is easily available from memory or has been read from the cache.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Status bar</u>
+ </p>
+
+ <p class="gq-finding-duplicates-5">Along the bottom of the Find Duplicates window is an area that displays the count of files contained in the window, and the number of files in the result list.</p>
+
+ <p class="gq-finding-duplicates-5">The status bar will also display the status of an active compare operation using the progress bar. A compare operation involves 2 or 3 stages, depending on the type of comparison. These are the stages in order:</p>
+
+ <p class="gq-finding-duplicates-6">1) If necessary, extra data is read into memory for the comparison stage, the progress bar will indicate this stage with text that resembles “reading dimensions...”, “reading checksums...”, or “reading similarity data...”.<br />
+ 2) The images are compared using the selected method, the progress bar will indicate this stage with the text “comparing...”.<br />
+ 3) The results are sorted for display, the progress bar will indicate this stage with the text “sorting...”.</p>
+
+ <p class="gq-finding-duplicates-5">Stage 1 is only used for the Dimensions, Checksum, and Similarity compare methods.</p>
+
+ <p class="gq-finding-duplicates-5">If the time to complete a stage will be significant, an estimated time to completion will also be displayed in the progress bar. The estimated time only refers to the current stage, other stages are not included in the estimate. The time estimate is displayed using the format MINUTES:SECONDS.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Thumbnails</u>
+ </p>
+
+ <p class="gq-finding-duplicates-5">Thumbnails can be displayed beside each image in the result list by enabling the Thumbnails check box.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Compare two file sets</u>
+ </p>
+
+ <p class="gq-finding-duplicates-5">Sometimes it is useful to compare one group of files to another, different group of files. Enable this check box to compare two groups of files. When enabled a second list will appear, files can be added to this list using the same methods for the main list.</p>
+
+ <p class="gq-finding-duplicates-5">When comparing two file sets the results list will display matches between the two lists. For each match group, the first file is always from the main group, and the remaining files are always from the second group.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Drag and Drop</u>
+ </p>
+
+ <p class="gq-finding-duplicates-5">Drag and drop can be initiated with the primary or middle mouse buttons. Dragging a file that is selected will include all selected files in the drag. Dragging a file that is not selected will first change the selection to the dragged file, and clear the previous selection.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-finding-duplicates-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="5_1_search.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-finding-duplicates-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-finding-duplicates-2"><a href="6_collections.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-finding-duplicates-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-finding-duplicates-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-finding-duplicates-8"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Image Search - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041004;19333400">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_4_external_editing.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Image Search</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="5_1_search.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>5. Image Search</H1>
-<P>Geeqie provides methods to find an image, and the ability to find
-duplicate images.</P>
-<P STYLE="margin-left: 0.79in">5.1 <A HREF="5_1_search.html">Search
-Window</A></P>
-<P STYLE="margin-left: 0.79in">5.2 <A HREF="5_2_finding_duplicates.html">Finding
-Duplicates</A></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="4_4_external_editing.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="5_1_search.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Image Search - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041004;19333400" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-image-search-6 {margin-bottom: 0in}
+ p.gq-image-search-5 {margin-left: 0.79in}
+ div.gq-image-search-4 {text-align: center}
+ table.gq-image-search-3 {page-break-before: always}
+ p.gq-image-search-2 {text-align: right}
+ p.gq-image-search-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-image-search-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-image-search-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_4_external_editing.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-search-1">Image Search</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-search-2"><a href="5_1_search.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>5. Image Search</h1>
+
+ <p>Geeqie provides methods to find an image, and the ability to find duplicate images.</p>
+
+ <p class="gq-image-search-5">5.1 <a href="5_1_search.html">Search Window</a></p>
+
+ <p class="gq-image-search-5">5.2 <a href="5_2_finding_duplicates.html">Finding Duplicates</a></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-image-search-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="4_4_external_editing.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-search-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-search-2"><a href="5_1_search.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-search-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-search-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-image-search-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Collections - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050107;1552700">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="5_2_finding_duplicates.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Collections</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="7_sidebars.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>6. Collections</H1>
-<P>Geeqie provides the ability to build lists of images, regardless
-of the location of the files on disk.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>The
-collection window</FONT></FONT></P>
-<P>A collection window displays the contents of a collection. It
-allows the collection to be modified and access to the images
-contained in the collection.</P>
-<P>To open a new empty collection window press C or select New
-collection from the file menu.</P>
-<P>To open an existing collection, press O or select Open collection
-from the file menu. A dialog will appear requesting the location of
-the collection file. A window will the open containing the selected
-collection. Recently opened or saved collections can also be opened
-by selecting the collection's file name from the Open recent sub menu
-of the file menu.</P>
-<P>The collection window consists of a pane to display the contents
-of the collection, and a status bar along the bottom of the window.</P>
-<P><U>Icon pane</U></P>
-<P STYLE="margin-left: 0.79in">The icon pane displays images
-contained in the collection as thumbnails in a grid, by default the
-file names also appear below each thumbnail.</P>
-<P STYLE="margin-left: 0.79in">The Icon pane works exactly like the
-Icon view mode of the <A HREF="2_4_file_pane.html">file pane</A> in a
-main window. But with the addition that the contents of the
-collection can be organized with drag and drop.</P>
-<P STYLE="margin-left: 0.79in">A <B>context menu</B> is available for
-the icon pane by right clicking the mouse or pressing the Menu key.</P>
-<P STYLE="margin-left: 0.79in"><B>Keyboard shortcuts</B> available in
-the collection window:</P>
-<CENTER>
- <TABLE WIDTH=80% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=2 CELLSPACING=0>
- <COL WIDTH=64*>
- <COL WIDTH=64*>
- <COL WIDTH=128*>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><B>Shortcut</B></P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><B>Context menu name</B></P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER><B>Description</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Enter</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>View</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens selected image in main window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>V</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>View in new window</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens selected image in a new window.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + A</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Select all</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Selects all images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + Shift + A</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Select none</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Clear the image selection.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + 1 through<BR>Control + 0</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Edit sub menu</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Executes the respective editor command.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + P</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Properties</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens a properties window for selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + C</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Copy</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Copy selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + M</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Move</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Move selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + R</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Rename</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Rename selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + D</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Delete</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Delete selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Delete</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Remove</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Remove selected images from result list.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + L</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Append from file list</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Add contents of main window to collection.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>A</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Append from collection</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Append contents of another collection from a
- file.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>S</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Save collection</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Save collection to disk, if the collection is new
- a dialog will appear to select the file name and location.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + S</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Save collection as</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens a dialog to select a new file name to use
- for the collection.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + T</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Show filename text</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Toggle display of text below icons.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Menu</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Displays the context menu.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>N</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Sort by name</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Sort collection by file name.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>I</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Sort by number</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Sort collection by file name, using natural
- numerical order</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>D</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Sort by date</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Sort collection by file date.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>B</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Sort by size</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Sort collection by file size.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>P</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Sort by path</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Sort collection by file location (path to file).</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Print</P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Opens a print dialog for selected images.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=25%>
- <P ALIGN=CENTER>Control + W</P>
- </TD>
- <TD WIDTH=25%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=50%>
- <P ALIGN=CENTER>Close window.</P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">The <B>selection</B> can be changed
-using the keyboard and mouse the same as in a <A HREF="2_4_file_pane.html">file
-pane</A> of the main window.</P>
-<P><BR><BR>
-</P>
-<P><U>Status bar</U></P>
-<P STYLE="margin-left: 0.79in">The status bar displays the total
-number of images in the collection, and the number of selected images
-in parenthesis. A progress bar also displays whenever thumbnails are
-loading from disk.</P>
-<P><BR><BR>
-</P>
-<P><U>Drag and Drop</U></P>
-<P STYLE="margin-left: 0.79in">Drag and drop can be initialized with
-the primary or middle mouse buttons. Dragging an image that is
-selected will include all selected images in the drag. Dragging an
-image that is not selected will drag only that image.</P>
-<P STYLE="margin-left: 0.79in">Dropping files and folders onto the
-collection window will add them to the collection, they will be
-inserted at the location of the drop. A red arrow will indicate the
-location of the drop as files are dragged over the collection window.
-When one or more folders are included in the drop list, a menu will
-appear to select how to handle the contents of the folders.</P>
-<P STYLE="margin-left: 0.79in">To move images within the collection
-to change their order, initiate a drag for the selected image(s) and
-then move the mouse to the desired location within the window. A red
-arrow will appear to assist in determining the destination of the
-dragged images. Release the drag to move the images to the new
-location in the list.</P>
-<P><BR><BR>
-</P>
-<P>Note: When renaming or moving files within Geeqie, the contents of
-collections located in the folder ($HOME)/.geeqie/collections will
-automatically update to the new name or location.</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="5_2_finding_duplicates.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="7_sidebars.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Collections - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050107;1552700" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-collections-9 {margin-bottom: 0in}
+ p.gq-collections-8 {font-weight: bold; text-align: center}
+ p.gq-collections-7 {margin-left: 0.79in}
+ p.gq-collections-6 {font-family: Albany, sans-serif; margin-top: 0.17in; page-break-after: avoid}
+ span.gq-collections-5 {font-size: 120%}
+ div.gq-collections-4 {text-align: center}
+ table.gq-collections-3 {page-break-before: always}
+ p.gq-collections-2 {text-align: right}
+ p.gq-collections-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr">
+ <div class="gq-collections-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-collections-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="5_2_finding_duplicates.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-collections-1">Collections</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-collections-2"><a href="7_sidebars.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>6. Collections</h1>
+
+ <p>Geeqie provides the ability to build lists of images, regardless of the location of the files on disk.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-collections-6"><span class="gq-collections-5">The collection window</span>
+ </p>
+
+ <p>A collection window displays the contents of a collection. It allows the collection to be modified and access to the images contained in the collection.</p>
+
+ <p>To open a new empty collection window press C or select New collection from the file menu.</p>
+
+ <p>To open an existing collection, press O or select Open collection from the file menu. A dialog will appear requesting the location of the collection file. A window will the open containing the selected collection. Recently opened or saved collections can also be opened by selecting the collection's file name from the Open recent sub menu of the file menu.</p>
+
+ <p>The collection window consists of a pane to display the contents of the collection, and a status bar along the bottom of the window.</p>
+
+ <p><u>Icon pane</u>
+ </p>
+
+ <p class="gq-collections-7">The icon pane displays images contained in the collection as thumbnails in a grid, by default the file names also appear below each thumbnail.</p>
+
+ <p class="gq-collections-7">The Icon pane works exactly like the Icon view mode of the <a href="2_4_file_pane.html">file pane</a> in a main window. But with the addition that the contents of the collection can be organized with drag and drop.</p>
+
+ <p class="gq-collections-7">A <b>context menu</b> is available for the icon pane by right clicking the mouse or pressing the Menu key.</p>
+
+ <p class="gq-collections-7"><b>Keyboard shortcuts</b> available in the collection window:</p>
+
+ <div class="gq-collections-4">
+ <table width="80%" border="1" cellpadding="2" cellspacing="0">
+ <col width="64*" />
+ <col width="64*" />
+ <col width="128*" />
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-8">Shortcut</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-8">Context menu name</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-8">Description</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Enter</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">View</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Opens selected image in main window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">V</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">View in new window</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Opens selected image in a new window.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + A</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Select all</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Selects all images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + Shift + A</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Select none</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Clear the image selection.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + 1 through<br />
+ Control + 0</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Edit sub menu</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Executes the respective editor command.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + P</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Properties</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Opens a properties window for selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + C</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Copy</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Copy selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + M</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Move</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Move selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + R</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Rename</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Rename selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + D</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Delete</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Delete selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Delete</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Remove</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Remove selected images from result list.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + L</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Append from file list</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Add contents of main window to collection.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">A</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Append from collection</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Append contents of another collection from a file.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">S</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Save collection</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Save collection to disk, if the collection is new a dialog will appear to select the file name and location.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + S</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Save collection as</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Opens a dialog to select a new file name to use for the collection.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + T</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Show filename text</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Toggle display of text below icons.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Menu</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1"><br />
+ </p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Displays the context menu.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">N</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Sort by name</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Sort collection by file name.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">I</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Sort by number</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Sort collection by file name, using natural numerical order</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">D</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Sort by date</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Sort collection by file date.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">B</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Sort by size</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Sort collection by file size.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">P</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Sort by path</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Sort collection by file location (path to file).</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1"><br />
+ </p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1">Print</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Opens a print dialog for selected images.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="25%">
+ <p class="gq-collections-1">Control + W</p>
+ </td>
+
+ <td width="25%">
+ <p class="gq-collections-1"><br />
+ </p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-collections-1">Close window.</p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-collections-7">The <b>selection</b> can be changed using the keyboard and mouse the same as in a <a href="2_4_file_pane.html">file pane</a> of the main window.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Status bar</u>
+ </p>
+
+ <p class="gq-collections-7">The status bar displays the total number of images in the collection, and the number of selected images in parenthesis. A progress bar also displays whenever thumbnails are loading from disk.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Drag and Drop</u>
+ </p>
+
+ <p class="gq-collections-7">Drag and drop can be initialized with the primary or middle mouse buttons. Dragging an image that is selected will include all selected images in the drag. Dragging an image that is not selected will drag only that image.</p>
+
+ <p class="gq-collections-7">Dropping files and folders onto the collection window will add them to the collection, they will be inserted at the location of the drop. A red arrow will indicate the location of the drop as files are dragged over the collection window. When one or more folders are included in the drop list, a menu will appear to select how to handle the contents of the folders.</p>
+
+ <p class="gq-collections-7">To move images within the collection to change their order, initiate a drag for the selected image(s) and then move the mouse to the desired location within the window. A red arrow will appear to assist in determining the destination of the dragged images. Release the drag to move the images to the new location in the list.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>Note: When renaming or moving files within Geeqie, the contents of collections located in the folder ($HOME)/.geeqie/collections will automatically update to the new name or location.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-collections-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="5_2_finding_duplicates.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-collections-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-collections-2"><a href="7_sidebars.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-collections-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-collections-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-collections-9"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>EXIF Sidebar - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041001;16441100">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="7_sidebars.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>EXIF - Sidebars</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="7_2_sort_manager.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>7.1 EXIF Sidebar</H1>
-<P>The EXIF sidebar displays EXIF data that is embedded in an image.
-The sidebar has two choices of data display, standard and advanced.</P>
-<P>To toggle display of the The EXIF sidebar press Control + E or
-select “Exif data” from the View menu.</P>
-<P><BR><BR>
-</P>
-<P><B>EXIF</B>: Stands for “Exchangeable image file format”,
-it is the common format used to store additional information into the
-JPEG and TIFF file formats. EXIF is the standard for saving the
-settings used when taking a photo with a digital camera, however
-other imaging devices and some software also use the EXIF format to
-store settings in the image file.</P>
-<P>The EXIF parser in Geeqie conforms to version 2.2 of the EXIF
-specification, with the exception that GPS attributes are ignored. In
-addition, manufacturer extensions to the format are not supported,
-this includes the proprietary data stored in the MakerNote Tag.
-Geeqie support of EXIF is read only.</P>
-<P><BR><BR>
-</P>
-<P><U>Standard view</U></P>
-<P STYLE="margin-left: 0.79in">The standard view of the EXIF sidebar
-displays information that is common to most cameras, data is
-displayed in the standard format for each attribute.</P>
-<P><U>Advanced view</U></P>
-<P STYLE="margin-left: 0.79in">The advanced view displays all tags
-that are present in the image. Unlike the standard view, data is
-displayed in raw format.</P>
-<P><BR><BR>
-</P>
-<P><U>Customizing the standard view</U></P>
-<P STYLE="margin-left: 0.79in">Additional information can be added to
-the standard view. To add custom EXIF tags to the standard view,
-switch to the advanced view. The first column of each row in the
-advanced view is a check box, enabling the check box will result in
-the corresponding tag to appear in the standard view. Customized tags
-are displayed in the order that they are added.</P>
-<P STYLE="margin-left: 0.79in">To remove customized tags from the
-standard view, switch to the advanced view and disable the check box
-next to the tag (or tags) you want to remove.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="7_sidebars.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="7_2_sort_manager.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>EXIF Sidebar - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041001;16441100" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-exif-6 {margin-bottom: 0in}
+ p.gq-exif-5 {margin-left: 0.79in}
+ div.gq-exif-4 {text-align: center}
+ table.gq-exif-3 {page-break-before: always}
+ p.gq-exif-2 {text-align: right}
+ p.gq-exif-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-exif-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-exif-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="7_sidebars.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-exif-1">EXIF - Sidebars</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-exif-2"><a href="7_2_sort_manager.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>7.1 EXIF Sidebar</h1>
+
+ <p>The EXIF sidebar displays EXIF data that is embedded in an image. The sidebar has two choices of data display, standard and advanced.</p>
+
+ <p>To toggle display of the The EXIF sidebar press Control + E or select “Exif data” from the View menu.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><b>EXIF</b>: Stands for “Exchangeable image file format”, it is the common format used to store additional information into the JPEG and TIFF file formats. EXIF is the standard for saving the settings used when taking a photo with a digital camera, however other imaging devices and some software also use the EXIF format to store settings in the image file.</p>
+
+ <p>The EXIF parser in Geeqie conforms to version 2.2 of the EXIF specification, with the exception that GPS attributes are ignored. In addition, manufacturer extensions to the format are not supported, this includes the proprietary data stored in the MakerNote Tag. Geeqie support of EXIF is read only.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Standard view</u>
+ </p>
+
+ <p class="gq-exif-5">The standard view of the EXIF sidebar displays information that is common to most cameras, data is displayed in the standard format for each attribute.</p>
+
+ <p><u>Advanced view</u>
+ </p>
+
+ <p class="gq-exif-5">The advanced view displays all tags that are present in the image. Unlike the standard view, data is displayed in raw format.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Customizing the standard view</u>
+ </p>
+
+ <p class="gq-exif-5">Additional information can be added to the standard view. To add custom EXIF tags to the standard view, switch to the advanced view. The first column of each row in the advanced view is a check box, enabling the check box will result in the corresponding tag to appear in the standard view. Customized tags are displayed in the order that they are added.</p>
+
+ <p class="gq-exif-5">To remove customized tags from the standard view, switch to the advanced view and disable the check box next to the tag (or tags) you want to remove.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-exif-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="7_sidebars.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-exif-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-exif-2"><a href="7_2_sort_manager.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-exif-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-exif-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-exif-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Sort Manager - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050131;9172400">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="7_1_exif.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Sort Manager - Sidebars</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="7_3_keywords.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>7.2 Sort Manager Sidebar</H1>
-<P>The Sort Manager sidebar provides a convenient method to quickly
-sort many files into a set of folders or collections.</P>
-<P>To toggle display of the Sort Manager press Control + S or select
-“Sort manager” from the View menu.</P>
-<P>The mode of the Sort Manager is selected by the drop down list
-under the sidebar title. The Folder mode allows moving or copying the
-visible image to a folder, and the Collection mode allows adding the
-visible image or file selection to a collection.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>Folder
-view</FONT></FONT></P>
-<P>The Sort Manager folder view consists of a vertical list for
-bookmarking folders, a section to select the operation to perform,
-and a set of buttons along the bottom.</P>
-<P>Clicking or activating an item in the list will copy, move, or
-link the active image's file to that location. The active image will
-then change to the next image.</P>
-<P><U>Bookmark list</U></P>
-<P STYLE="margin-left: 0.79in">This is a list of possible folders to
-use as a destination for the selected operation. A context menu will
-appear by right clicking on an item, or pressing the menu key when
-the item has the focus.</P>
-<P STYLE="margin-left: 0.79in">Folders can be added to the list by
-activating the Add button at the bottom of the sidebar, or dragging a
-folder onto the list.</P>
-<P STYLE="margin-left: 0.79in">To edit an item select “Properties”
-from it's context menu. A dialog will appear allowing the Name, Path,
-and Icon for the item to be changed. Select OK to close the dialog
-and apply the changes, or Cancel to close the dialog and discard the
-changes.</P>
-<P STYLE="margin-left: 0.79in">To change the order of the list,
-select “Move up” or “Move down” from the
-item's context menu. To move an item with the keyboard move the focus
-to that item, then press Shift + Up or Shift + Down to move the item.</P>
-<P STYLE="margin-left: 0.79in">To remove an item from the list select
-“Remove” from it's context menu.</P>
-<P><U>Copy, Move, and Link</U></P>
-<P STYLE="margin-left: 0.79in">These are the available operations to
-use on the active image, they should be self explanatory.</P>
-<P><U>Add button</U></P>
-<P STYLE="margin-left: 0.79in">Activate this button to add a folder
-to the bookmark list. A dialog will appear to allow selection of the
-folder to use for the new item.</P>
-<P><U>Undo button</U></P>
-<P STYLE="margin-left: 0.79in">Activate this button to undo the last
-copy, move, or link operation. The undo function can only reverse the
-most recent operation.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>Collection
-view</FONT></FONT></P>
-<P>The Sort Manager collection view consists of a vertical list of
-collection, a section to determine the current selection, and a set
-of buttons along the bottom.</P>
-<P>Clicking or activating an item in the list will add the selected
-image to that collection.</P>
-<P><U>Collection list</U></P>
-<P STYLE="margin-left: 0.79in">This is the list of collections
-located in the folder $HOME/.geeqie/collections. Activating a member
-of this list will result in the current image selection to be added
-to the collection. If the image already exists within the collection,
-it will not be added a second time.</P>
-<P STYLE="margin-left: 0.79in">A new empty collection can be added to
-the list by activating the Add button at the bottom of the sidebar.</P>
-<P><U>Choosing the selection style</U></P>
-<P STYLE="margin-left: 0.79in">The images to add when activating a
-collection is determined by the selection style:</P>
-<P STYLE="margin-left: 1.58in"><B>Add image:</B><SPAN STYLE="font-weight: medium">
-The visible image is added to the collection.</SPAN><B> </B> <BR><B>Add
-selection:</B> All images selected in the file list will be added to
-the collection.</P>
-<P><U>Add button</U></P>
-<P STYLE="margin-left: 0.79in">Activate this button to add a new
-empty collection to the visible list. A dialog will appear to allow
-entry of the name to use for the new collection.</P>
-<P><U>Undo button</U></P>
-<P STYLE="margin-left: 0.79in">Activate this button to undo the last
-add operation. The undo function can only reverse the most recent
-operation.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="7_1_exif.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="7_3_keywords.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Sort Manager - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050131;9172400" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-sort-manager-10 {margin-bottom: 0in}
+ p.gq-sort-manager-9 {margin-left: 1.58in}
+ span.gq-sort-manager-8 {font-weight: medium}
+ p.gq-sort-manager-7 {margin-left: 0.79in}
+ p.gq-sort-manager-6 {font-family: Albany, sans-serif; margin-top: 0.17in; page-break-after: avoid}
+ span.gq-sort-manager-5 {font-size: 120%}
+ div.gq-sort-manager-4 {text-align: center}
+ table.gq-sort-manager-3 {page-break-before: always}
+ p.gq-sort-manager-2 {text-align: right}
+ p.gq-sort-manager-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-sort-manager-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-sort-manager-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="7_1_exif.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sort-manager-1">Sort Manager - Sidebars</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sort-manager-2"><a href="7_3_keywords.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>7.2 Sort Manager Sidebar</h1>
+
+ <p>The Sort Manager sidebar provides a convenient method to quickly sort many files into a set of folders or collections.</p>
+
+ <p>To toggle display of the Sort Manager press Control + S or select “Sort manager” from the View menu.</p>
+
+ <p>The mode of the Sort Manager is selected by the drop down list under the sidebar title. The Folder mode allows moving or copying the visible image to a folder, and the Collection mode allows adding the visible image or file selection to a collection.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-sort-manager-6"><span class="gq-sort-manager-5">Folder view</span>
+ </p>
+
+ <p>The Sort Manager folder view consists of a vertical list for bookmarking folders, a section to select the operation to perform, and a set of buttons along the bottom.</p>
+
+ <p>Clicking or activating an item in the list will copy, move, or link the active image's file to that location. The active image will then change to the next image.</p>
+
+ <p><u>Bookmark list</u>
+ </p>
+
+ <p class="gq-sort-manager-7">This is a list of possible folders to use as a destination for the selected operation. A context menu will appear by right clicking on an item, or pressing the menu key when the item has the focus.</p>
+
+ <p class="gq-sort-manager-7">Folders can be added to the list by activating the Add button at the bottom of the sidebar, or dragging a folder onto the list.</p>
+
+ <p class="gq-sort-manager-7">To edit an item select “Properties” from it's context menu. A dialog will appear allowing the Name, Path, and Icon for the item to be changed. Select OK to close the dialog and apply the changes, or Cancel to close the dialog and discard the changes.</p>
+
+ <p class="gq-sort-manager-7">To change the order of the list, select “Move up” or “Move down” from the item's context menu. To move an item with the keyboard move the focus to that item, then press Shift + Up or Shift + Down to move the item.</p>
+
+ <p class="gq-sort-manager-7">To remove an item from the list select “Remove” from it's context menu.</p>
+
+ <p><u>Copy, Move, and Link</u>
+ </p>
+
+ <p class="gq-sort-manager-7">These are the available operations to use on the active image, they should be self explanatory.</p>
+
+ <p><u>Add button</u>
+ </p>
+
+ <p class="gq-sort-manager-7">Activate this button to add a folder to the bookmark list. A dialog will appear to allow selection of the folder to use for the new item.</p>
+
+ <p><u>Undo button</u>
+ </p>
+
+ <p class="gq-sort-manager-7">Activate this button to undo the last copy, move, or link operation. The undo function can only reverse the most recent operation.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-sort-manager-6"><span class="gq-sort-manager-5">Collection view</span>
+ </p>
+
+ <p>The Sort Manager collection view consists of a vertical list of collection, a section to determine the current selection, and a set of buttons along the bottom.</p>
+
+ <p>Clicking or activating an item in the list will add the selected image to that collection.</p>
+
+ <p><u>Collection list</u>
+ </p>
+
+ <p class="gq-sort-manager-7">This is the list of collections located in the folder $HOME/.geeqie/collections. Activating a member of this list will result in the current image selection to be added to the collection. If the image already exists within the collection, it will not be added a second time.</p>
+
+ <p class="gq-sort-manager-7">A new empty collection can be added to the list by activating the Add button at the bottom of the sidebar.</p>
+
+ <p><u>Choosing the selection style</u>
+ </p>
+
+ <p class="gq-sort-manager-7">The images to add when activating a collection is determined by the selection style:</p>
+
+ <p class="gq-sort-manager-9"><b>Add image:</b><span class="gq-sort-manager-8">The visible image is added to the collection.</span><br />
+ <b>Add selection:</b> All images selected in the file list will be added to the collection.</p>
+
+ <p><u>Add button</u>
+ </p>
+
+ <p class="gq-sort-manager-7">Activate this button to add a new empty collection to the visible list. A dialog will appear to allow entry of the name to use for the new collection.</p>
+
+ <p><u>Undo button</u>
+ </p>
+
+ <p class="gq-sort-manager-7">Activate this button to undo the last add operation. The undo function can only reverse the most recent operation.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-sort-manager-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="7_1_exif.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sort-manager-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sort-manager-2"><a href="7_3_keywords.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sort-manager-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sort-manager-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-sort-manager-10"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Keywords Sidebar - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041001;18091800">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="7_2_sort_manager.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Keywords - Sidebar</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="8_image_presentation.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>7.3 Keywords Sidebar</H1>
-<P>The Keywords sidebar displays keywords and comments for the active
-image, and provides functions for editing them.</P>
-<P>To toggle display of the Keywords sidebar press Control + K or
-select “Keywords” from the View menu.</P>
-<P><BR><BR>
-</P>
-<P><B>Keywords</B><SPAN STYLE="font-weight: medium"> are single words
-that are associated to an image. They can be used to classify, group,
-or describe; the uses for keywords are only limited by your
-imagination.</SPAN> Images associated to one or more keywords can be
-found using the <A HREF="5_1_search.html">Search window</A>.</P>
-<P><B>Comments</B> is an area to associate a textual description to
-an image.</P>
-<P><BR><BR>
-</P>
-<P>The sidebar is comprised of three sections: Keywords, Comments and
-a button bar.</P>
-<P><U>Keywords</U></P>
-<P STYLE="margin-left: 0.79in">The keywords panel consists of two
-fields. The left field is a text entry that allows direct typing of
-one or more keywords. The right field is a list of favorite or often
-used keywords that can be associated with the active image by filling
-the check box next to the keyword.</P>
-<P STYLE="margin-left: 0.79in">The <B>text entry</B> allows typing
-keywords to associate them with the active image. Keywords entered
-here can be separated by a space, tab, or comma; creating a new line
-by pressing Enter will also separate keywords.</P>
-<P STYLE="margin-left: 0.79in">The <B>favorite keywords</B> list
-allows quick selection of commonly used keywords. A keyword is
-enabled when the check box next to it is filled. The text entry will
-update as words from the list are selected. To edit the favorite
-keywords list activate the favorites button at the bottom of the
-sidebar.</P>
-<P><U>Comments</U></P>
-<P STYLE="margin-left: 0.79in">This text entry allows entering text
-to be associated with the active image.</P>
-<P><U>The buttons</U></P>
-<P STYLE="margin-left: 0.79in"><I><SPAN STYLE="font-weight: medium">Note:
-These buttons are only displayed as an icon, the text below refers to
-the tool tip that appears by hovering the mouse over each button.</SPAN></I></P>
-<P STYLE="margin-left: 0.79in"><B>Edit favorite keywords list</B>:
-Activate this button to display a dialog to edit the favorite
-keywords list. For details on the dialog refer to the section titled
-Favorite Keywords Dialog, below.</P>
-<P STYLE="margin-left: 0.79in"><B>Add keywords to selected files:</B>
-This button will be active when more than one image is selected.
-Activate this button to add all keywords currently displayed to the
-selected list of files.</P>
-<P STYLE="margin-left: 0.79in"><B>Add keywords to selected files,
-replacing existing ones:</B><SPAN STYLE="font-weight: medium"> This
-button will be active when more than one image is selected. Activate
-this button to replace all keywords in the selected files with the
-ones that are currently displayed. All previously existing keywords
-for those files will be lost.</SPAN></P>
-<P STYLE="margin-left: 0.79in"><SPAN STYLE="font-weight: medium"><B>Save
-comment now:</B> Saving of changes to keywords and comments are
-slightly delayed</SPAN> to reduce writes to disk. If the changes have
-not yet been written to disk this button will be active, activating
-it will immediately save the changes.</P>
-<P><BR><BR>
-</P>
-<P><U>Favorite Keywords Dialog</U></P>
-<P STYLE="margin-left: 0.79in">This dialog allows editing of the
-favorite keywords list that is displayed in the Keywords sidebar.
-Activating the Add button will create a new blank item at the current
-position in the list, the new item will immediately change to the
-editing state to allow entry of the new keyword. Activating the
-Remove button will remove the selected keyword from the list. To edit
-a row highlight it then click it or press Enter on the keyboard.</P>
-<P STYLE="margin-left: 0.79in">Activate OK to save the changes and
-close the dialog, Cancel will discard the changes and close the
-dialog.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="7_2_sort_manager.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="8_image_presentation.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Keywords Sidebar - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041001;18091800" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-keywords-8 {margin-bottom: 0in}
+ p.gq-keywords-7 {font-style: italic; margin-left: 0.79in}
+ p.gq-keywords-6 {margin-left: 0.79in}
+ span.gq-keywords-5 {font-weight: medium}
+ div.gq-keywords-4 {text-align: center}
+ table.gq-keywords-3 {page-break-before: always}
+ p.gq-keywords-2 {text-align: right}
+ p.gq-keywords-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-keywords-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-keywords-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="7_2_sort_manager.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keywords-1">Keywords - Sidebar</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keywords-2"><a href="8_image_presentation.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>7.3 Keywords Sidebar</h1>
+
+ <p>The Keywords sidebar displays keywords and comments for the active image, and provides functions for editing them.</p>
+
+ <p>To toggle display of the Keywords sidebar press Control + K or select “Keywords” from the View menu.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><b>Keywords</b> <span class="gq-keywords-5">are single words that are associated to an image. They can be used to classify, group, or describe; the uses for keywords are only limited by your imagination.</span> Images associated to one or more keywords can be found using the <a href="5_1_search.html">Search window</a>.</p>
+
+ <p><b>Comments</b> is an area to associate a textual description to an image.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p>The sidebar is comprised of three sections: Keywords, Comments and a button bar.</p>
+
+ <p><u>Keywords</u>
+ </p>
+
+ <p class="gq-keywords-6">The keywords panel consists of two fields. The left field is a text entry that allows direct typing of one or more keywords. The right field is a list of favorite or often used keywords that can be associated with the active image by filling the check box next to the keyword.</p>
+
+ <p class="gq-keywords-6">The <b>text entry</b> allows typing keywords to associate them with the active image. Keywords entered here can be separated by a space, tab, or comma; creating a new line by pressing Enter will also separate keywords.</p>
+
+ <p class="gq-keywords-6">The <b>favorite keywords</b> list allows quick selection of commonly used keywords. A keyword is enabled when the check box next to it is filled. The text entry will update as words from the list are selected. To edit the favorite keywords list activate the favorites button at the bottom of the sidebar.</p>
+
+ <p><u>Comments</u>
+ </p>
+
+ <p class="gq-keywords-6">This text entry allows entering text to be associated with the active image.</p>
+
+ <p><u>The buttons</u>
+ </p>
+
+ <p class="gq-keywords-7"><span class="gq-keywords-5">Note: These buttons are only displayed as an icon, the text below refers to the tool tip that appears by hovering the mouse over each button.</span>
+ </p>
+
+ <p class="gq-keywords-6"><b>Edit favorite keywords list</b>: Activate this button to display a dialog to edit the favorite keywords list. For details on the dialog refer to the section titled Favorite Keywords Dialog, below.</p>
+
+ <p class="gq-keywords-6"><b>Add keywords to selected files:</b> This button will be active when more than one image is selected. Activate this button to add all keywords currently displayed to the selected list of files.</p>
+
+ <p class="gq-keywords-6"><b>Add keywords to selected files, replacing existing ones:</b> <span class="gq-keywords-5">This button will be active when more than one image is selected. Activate this button to replace all keywords in the selected files with the ones that are currently displayed. All previously existing keywords for those files will be lost.</span></p>
+
+ <p class="gq-keywords-6"><span class="gq-keywords-5"><b>Save comment now:</b> Saving of changes to keywords and comments are slightly delayed</span> to reduce writes to disk. If the changes have not yet been written to disk this button will be active, activating it will immediately save the changes.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Favorite Keywords Dialog</u>
+ </p>
+
+ <p class="gq-keywords-6">This dialog allows editing of the favorite keywords list that is displayed in the Keywords sidebar. Activating the Add button will create a new blank item at the current position in the list, the new item will immediately change to the editing state to allow entry of the new keyword. Activating the Remove button will remove the selected keyword from the list. To edit a row highlight it then click it or press Enter on the keyboard.</p>
+
+ <p class="gq-keywords-6">Activate OK to save the changes and close the dialog, Cancel will discard the changes and close the dialog.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-keywords-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="7_2_sort_manager.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keywords-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keywords-2"><a href="8_image_presentation.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keywords-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-keywords-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-keywords-8"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Sidebars - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041001;15410600">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="6_collections.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Sidebars</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="7_1_exif.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>7. Sidebars</H1>
-<P>A sidebar is a panel that appears next to an image, and displays
-additional information about the image.</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">7.1 <A HREF="7_1_exif.html">EXIF
-sidebar</A></P>
-<P STYLE="margin-left: 0.79in">7.2 <A HREF="7_2_sort_manager.html">Sort
-Manager sidebar</A></P>
-<P STYLE="margin-left: 0.79in">7.3 <A HREF="7_3_keywords_sidebar.html">Keywords
-sidebar</A></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="6_collections.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="7_1_exif.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Sidebars - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041001;15410600" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-sidebars-6 {margin-bottom: 0in}
+ p.gq-sidebars-5 {margin-left: 0.79in}
+ div.gq-sidebars-4 {text-align: center}
+ table.gq-sidebars-3 {page-break-before: always}
+ p.gq-sidebars-2 {text-align: right}
+ p.gq-sidebars-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-sidebars-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-sidebars-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="6_collections.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sidebars-1">Sidebars</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sidebars-2"><a href="7_1_exif.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>7. Sidebars</h1>
+
+ <p>A sidebar is a panel that appears next to an image, and displays additional information about the image.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-sidebars-5">7.1 <a href="7_1_exif.html">EXIF sidebar</a></p>
+
+ <p class="gq-sidebars-5">7.2 <a href="7_2_sort_manager.html">Sort Manager sidebar</a></p>
+
+ <p class="gq-sidebars-5">7.3 <a href="7_3_keywords_sidebar.html">Keywords sidebar</a></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-sidebars-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="6_collections.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sidebars-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sidebars-2"><a href="7_1_exif.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sidebars-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-sidebars-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-sidebars-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Slide Show - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050107;1560800">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="8_image_presentation.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Slide Show – Image Presentation</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="8_2_fullscreen.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>8.1 Slide Show</H1>
-<P>The image pane can be set to automatically change the displayed
-image after a period of time, in Geeqie this is referred to as a
-slide show.</P>
-<P><BR><BR>
-</P>
-<P><U>Starting a slide show</U></P>
-<P>A slide show can be started in a number of ways:</P>
-<UL>
- <LI><P>From the menu bar - open the <B>View</B> menu and select
- <B>Toggle slide show</B> to toggle the slide show on or off .</P>
- <LI><P STYLE="font-weight: medium">From the keyboard - press the <B>S</B>
- key to toggle the slide show on or off.</P>
- <LI><P STYLE="font-weight: medium">From a context menu - right click
- an image pane, and select <B>Start slide show</B>, or <B>Stop slide
- show</B>; the text will change depending on the state of the current
- slide show.</P>
-</UL>
-<P><BR><BR>
-</P>
-<P><U>Stopping a slide show</U></P>
-<P>An active slide show can be stopped by using the same functions
-available to start one, as they work like a toggle switch. If slide
-show repeat is not enabled in the <A HREF="10_1_general.html">options
-dialog</A>, the slide show will stop when the last image in the
-sequence is displayed.</P>
-<P>Any action that changes the image pane to a new image will stop
-the active slide show, with the exception of the methods discussed in
-<A HREF="#navigation">Slide show sequence navigation</A>.</P>
-<P><BR><BR>
-</P>
-<P><U>Slide show status</U></P>
-<P>The main window <A HREF="2_7_status_bar.html">status bar</A> can
-be used to determine when a slide show is active, <B>Slide show</B>
-will be displayed next to the file count field. An individual <A HREF="3_1_image_window.html">Image
-Window</A> can also display a slide show, however the status will not
-be immediately visible. To determine the slide show status in an
-image window, open a context menu by right clicking or using the menu
-key, the slide show menu item will reflect the slide show status; if
-<B>Start slide show</B> is displayed, no slide show is active,
-conversely if <B>Stop slide show</B> is displayed a slide show is
-active.</P>
-<P>When a Slide show is paused, the main window status bar will
-display <B>Paused</B> instead of <B>Slide show</B>. Likewise, the
-image context menu will display <B>Pause slide show</B> or <B>Continue
-slide show</B>, depending on the current state.</P>
-<P><BR><BR>
-</P>
-<P><U>Pausing a slide show</U></P>
-<P>An active slide show can be paused in two ways:</P>
-<UL>
- <LI><P>From the keyboard - press the <B>P</B> key while a slide show
- is active.</P>
- <LI><P>From a context menu - right click the image pane displaying
- the slide show, and select <B>Pause slide show</B>, or <B>Continue
- slide show</B> depending on the current slide show state.</P>
-</UL>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Selecting the images to include in
-a slide show</U></P>
-<P STYLE="font-weight: medium">When a single image is selected, all
-images in the current folder are included in the slide show. The
-sequence will begin with the current image; however if random slide
-shows are enabled, the sequence will begin with a random image from
-the list.</P>
-<P STYLE="font-weight: medium">To only include some images in a slide
-show, use multiple selection to select the images to include before
-starting the slide show.</P>
-<P STYLE="font-weight: medium">An image collection can be used as the
-list of images, to do this drag an image from a collection window
-onto the image pane. Starting a slide show will then include the
-images from that collection.</P>
-<P>So far, the methods described are for slide shows in a main
-window, in an <A HREF="3_1_image_window.html">Image Window</A>, the
-slide show will use all images referenced by that window.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Recursive slide show</U></P>
-<P STYLE="font-weight: medium">In the main window, a recursive slide
-show can be started from a folder's context menu; the folder's right
-click menu will include two slide show options:</P>
-<UL>
- <LI><P STYLE="font-weight: medium">Slide show: This will start a
- slide show that includes all images in the selected folder.</P>
- <LI><P STYLE="font-weight: medium">Slide show recursive: The slide
- show will include all images in the selected folder, and all images
- in the folders that are contained within the selected folder.</P>
-</UL>
-<P><BR><BR>
-</P>
-<P><A NAME="navigation"></A><U>Slide show sequence navigation</U></P>
-<P STYLE="font-weight: medium">When a slide show is active, functions
-that normally change the image forward and backward can be used to
-step through those contained in the slide show.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Configuring a slide show</U></P>
-<P>The options that control the behavior of slide shows are located
-on the <A HREF="10_1_general.html">General tab</A> of the options
-dialog.</P>
-<P STYLE="margin-left: 0.79in; font-weight: medium"><B>Display time</B>:
-The delay between each image in the slide show can be adjusted with
-the <SPAN STYLE="text-decoration: none"><B>Delay before image change</B>
-option.</SPAN></P>
-<P STYLE="margin-left: 0.79in; font-weight: medium; text-decoration: none">
-<B>Repeat</B>: This will cause the slide show to loop indefinitely,
-it will continue with the first image after displaying the last image
-in the slide show list.</P>
-<P STYLE="margin-left: 0.79in"><SPAN STYLE="text-decoration: none"><B>Random</B>:
-This will display images randomly selected from the slide show list.
-Each image from the slide show list will be displayed once.</SPAN>
-When Repeat is also enabled, the random sequence is changed after
-each complete cycle of the images.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="8_image_presentation.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="8_2_fullscreen.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Slide Show - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050107;1560800" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-slideshow-10 {margin-bottom: 0in}
+ p.gq-slideshow-9 {margin-left: 0.79in}
+ p.gq-slideshow-8 {margin-left: 0.79in; font-weight: medium; text-decoration: none}
+ p.gq-slideshow-7 {margin-left: 0.79in; font-weight: medium}
+ span.gq-slideshow-6 {text-decoration: none}
+ p.gq-slideshow-5 {font-weight: medium}
+ div.gq-slideshow-4 {text-align: center}
+ table.gq-slideshow-3 {page-break-before: always}
+ p.gq-slideshow-2 {text-align: right}
+ p.gq-slideshow-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-slideshow-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-slideshow-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="8_image_presentation.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-slideshow-1">Slide Show – Image Presentation</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-slideshow-2"><a href="8_2_fullscreen.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>8.1 Slide Show</h1>
+
+ <p>The image pane can be set to automatically change the displayed image after a period of time, in Geeqie this is referred to as a slide show.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Starting a slide show</u>
+ </p>
+
+ <p>A slide show can be started in a number of ways:</p>
+
+ <ul>
+ <li>
+ <p>From the menu bar - open the <b>View</b> menu and select <b>Toggle slide show</b> to toggle the slide show on or off .</p>
+ </li>
+
+ <li>
+ <p class="gq-slideshow-5">From the keyboard - press the <b>S</b> key to toggle the slide show on or off.</p>
+ </li>
+
+ <li>
+ <p class="gq-slideshow-5">From a context menu - right click an image pane, and select <b>Start slide show</b>, or <b>Stop slide show</b>; the text will change depending on the state of the current slide show.</p>
+ </li>
+ </ul>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Stopping a slide show</u>
+ </p>
+
+ <p>An active slide show can be stopped by using the same functions available to start one, as they work like a toggle switch. If slide show repeat is not enabled in the <a href="10_1_general.html">options dialog</a>, the slide show will stop when the last image in the sequence is displayed.</p>
+
+ <p>Any action that changes the image pane to a new image will stop the active slide show, with the exception of the methods discussed in <a href="#navigation">Slide show sequence navigation</a>.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Slide show status</u>
+ </p>
+
+ <p>The main window <a href="2_7_status_bar.html">status bar</a> can be used to determine when a slide show is active, <b>Slide show</b> will be displayed next to the file count field. An individual <a href="3_1_image_window.html">Image Window</a> can also display a slide show, however the status will not be immediately visible. To determine the slide show status in an image window, open a context menu by right clicking or using the menu key, the slide show menu item will reflect the slide show status; if <b>Start slide show</b> is displayed, no slide show is active, conversely if <b>Stop slide show</b> is displayed a slide show is active.</p>
+
+ <p>When a Slide show is paused, the main window status bar will display <b>Paused</b> instead of <b>Slide show</b>. Likewise, the image context menu will display <b>Pause slide show</b> or <b>Continue slide show</b>, depending on the current state.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Pausing a slide show</u>
+ </p>
+
+ <p>An active slide show can be paused in two ways:</p>
+
+ <ul>
+ <li>
+ <p>From the keyboard - press the <b>P</b> key while a slide show is active.</p>
+ </li>
+
+ <li>
+ <p>From a context menu - right click the image pane displaying the slide show, and select <b>Pause slide show</b>, or <b>Continue slide show</b> depending on the current slide show state.</p>
+ </li>
+ </ul>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-slideshow-5"><u>Selecting the images to include in a slide show</u>
+ </p>
+
+ <p class="gq-slideshow-5">When a single image is selected, all images in the current folder are included in the slide show. The sequence will begin with the current image; however if random slide shows are enabled, the sequence will begin with a random image from the list.</p>
+
+ <p class="gq-slideshow-5">To only include some images in a slide show, use multiple selection to select the images to include before starting the slide show.</p>
+
+ <p class="gq-slideshow-5">An image collection can be used as the list of images, to do this drag an image from a collection window onto the image pane. Starting a slide show will then include the images from that collection.</p>
+
+ <p>So far, the methods described are for slide shows in a main window, in an <a href="3_1_image_window.html">Image Window</a>, the slide show will use all images referenced by that window.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-slideshow-5"><u>Recursive slide show</u>
+ </p>
+
+ <p class="gq-slideshow-5">In the main window, a recursive slide show can be started from a folder's context menu; the folder's right click menu will include two slide show options:</p>
+
+ <ul>
+ <li>
+ <p class="gq-slideshow-5">Slide show: This will start a slide show that includes all images in the selected folder.</p>
+ </li>
+
+ <li>
+ <p class="gq-slideshow-5">Slide show recursive: The slide show will include all images in the selected folder, and all images in the folders that are contained within the selected folder.</p>
+ </li>
+ </ul>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><a name="navigation" id="navigation"></a><u>Slide show sequence navigation</u>
+ </p>
+
+ <p class="gq-slideshow-5">When a slide show is active, functions that normally change the image forward and backward can be used to step through those contained in the slide show.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-slideshow-5"><u>Configuring a slide show</u>
+ </p>
+
+ <p>The options that control the behavior of slide shows are located on the <a href="10_1_general.html">General tab</a> of the options dialog.</p>
+
+ <p class="gq-slideshow-7"><b>Display time</b>: The delay between each image in the slide show can be adjusted with the <span class="gq-slideshow-6"><b>Delay before image change</b> option.</span></p>
+
+ <p class="gq-slideshow-8"><b>Repeat</b>: This will cause the slide show to loop indefinitely, it will continue with the first image after displaying the last image in the slide show list.</p>
+
+ <p class="gq-slideshow-9"><span class="gq-slideshow-6"><b>Random</b>: This will display images randomly selected from the slide show list. Each image from the slide show list will be displayed once.</span> When Repeat is also enabled, the random sequence is changed after each complete cycle of the images.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-slideshow-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="8_image_presentation.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-slideshow-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-slideshow-2"><a href="8_2_fullscreen.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-slideshow-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-slideshow-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-slideshow-10"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Full Screen - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20041222;16371700">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="8_1_slideshow.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Full Screen – Image Presentation</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="9_printing.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>8.2 Full Screen</H1>
-<P>Geeqie allows for the image pane to be expanded to fill the entire
-screen, this is referred to as full screen.</P>
-<P><BR><BR>
-</P>
-<P><U>Turning on full screen</U></P>
-<P>Full screen can be activated in a number of ways:</P>
-<UL>
- <LI><P>From the menu bar - open the <B>View</B> menu and select <B>Full
- screen</B>.</P>
- <LI><P STYLE="font-weight: medium">From the keyboard - press the <B>F</B>
- key to toggle full screen.</P>
- <LI><P STYLE="font-weight: medium">From a context menu - right click
- an image pane, and select <B>Full screen</B>.</P>
-</UL>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Turning off full screen</U></P>
-<P STYLE="font-weight: medium">To return to the normal view:</P>
-<UL>
- <LI><P STYLE="font-weight: medium">From the keyboard - press the <B>F</B>
- or [<B>Escape</B>] key to stop full screen.</P>
- <LI><P STYLE="font-weight: medium">From a context menu - right click
- the image pane, and select <B>Exit full screen</B>.</P>
- <LI><P STYLE="font-weight: medium">From the menu bar - the menu bar
- may be visible when using multiple monitors, open the <B>View</B>
- menu and select <B>Full screen</B>.</P>
-</UL>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Configuring full screen</U></P>
-<P>Full screen behavior and location can be adjusted on the <A HREF="10_6_advanced.html">Advanced
-tab</A> of the preferences dialog.</P>
-<P STYLE="margin-left: 0.79in"><B>Size and location</B>: This can be
-changed using <B>Full screen size</B> option, this can be used to
-select the monitor to use in a multiple monitor configuration.</P>
-<P STYLE="margin-left: 0.79in"><B>Smooth image flip in full screen</B>:
-This option delays the image change until the next image is entirely
-decoded into memory, the result is a smoother transition between
-images.</P>
-<P STYLE="margin-left: 0.79in"><B>Disable screen saver in full
-screen</B>: This option will execute <I>xscreensaver-command
---deactivate</I> once per minute to avoid the screen saver from
-activating.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Navigation</U></P>
-<P STYLE="font-weight: medium">The usual image navigation controls
-are available when in full screen, these are the commands available:</P>
-<CENTER>
- <TABLE WIDTH=80% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=4 CELLSPACING=0 RULES=ROWS>
- <COLGROUP>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- </COLGROUP>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><B>Keyboard</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><B>Mouse</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>Description</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>F, V, Escape</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Context menu</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=LEFT>Turn off full screen.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><B>Image Navigation</B></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>PageDown</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Left Click on image view<BR>Mouse Wheel down (*)</P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to next image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>PageUp</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Middle Click on image view<BR>Mouse Wheel up (*)</P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to previous image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Home</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to first image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>End</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to last image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD COLSPAN=2 WIDTH=67%>
- <P ALIGN=LEFT><B>Image panning</B> (image has keyboard focus)</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=LEFT><BR>
- </P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Left Drag on image view<BR>[Shift] + Mouse Wheel
- (*)</P>
- </TD>
- <TD WIDTH=33%>
- <P>Pan image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Shift] + Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Pan Image faster.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>[Control] + Arrow Keys</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Pan to respective edge of image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>SpaceBar</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to next image.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Backspace</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P>Change to previous image.</P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P STYLE="margin-left: 0.79in">(*) Default Mouse wheel functions, can
-be altered by changing <SPAN STYLE="text-decoration: none">the <A HREF="10_6_advanced.html">Mouse
-wheel scrolls image</A> option.</SPAN></P>
-<P STYLE="font-weight: medium">Several other standard controls are
-also available through the keyboard and context menu:</P>
-<CENTER>
- <TABLE WIDTH=80% BORDER=1 BORDERCOLOR="#cccccc" CELLPADDING=4 CELLSPACING=0 RULES=ROWS STYLE="page-break-before: always">
- <COL WIDTH=128*>
- <COL WIDTH=128*>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P><B>Function</B></P>
- </TD>
- <TD WIDTH=50%>
- <P><B>Difference from normal view</B></P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>Copy, Move, Rename</P>
- </TD>
- <TD WIDTH=50%>
- <P>same (*)</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>Delete</P>
- </TD>
- <TD WIDTH=50%>
- <P>same (*)</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>External edit commands<BR>([Control] + 1 ... 0, context menu)</P>
- </TD>
- <TD WIDTH=50%>
- <P>Full screen will turn off prior to activating the function.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>Open image properties window<BR>([Control] + P, context menu)</P>
- </TD>
- <TD WIDTH=50%>
- <P>same (*)</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>Image rotation, mirror, and flip</P>
- </TD>
- <TD WIDTH=50%>
- <P>same</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>Zoom controls</P>
- </TD>
- <TD WIDTH=50%>
- <P>same</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>I</P>
- </TD>
- <TD WIDTH=50%>
- <P>Toggle information overlay for full screen: on with histogramm, on without histogramm, off.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>K</P>
- </TD>
- <TD WIDTH=50%>
- <P>Switch between the different histogramm modes: RGB, value, maximum value, red channel, green channel, blue channel.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>J</P>
- </TD>
- <TD WIDTH=50%>
- <P>Toogle between linear and logarithmical histogramm.</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>Slide show controls<BR>(S, P, context menu)</P>
- </TD>
- <TD WIDTH=50%>
- <P>same</P>
- </TD>
- </TR>
- <TR VALIGN=TOP>
- <TD WIDTH=50%>
- <P>Quit with [Control] + Q</P>
- </TD>
- <TD WIDTH=50%>
- <P>same</P>
- </TD>
- </TR>
- </TABLE>
-</CENTER>
-<P STYLE="margin-left: 0.79in">(*) Releases prior to 1.5.3 will turn
-off full screen prior to activating the function.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="8_1_slideshow.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="9_printing.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Full Screen - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20041222;16371700" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-fullscreen-12 {margin-bottom: 0in}
+ p.gq-fullscreen-11 {font-weight: bold}
+ span.gq-fullscreen-10 {text-decoration: none}
+ p.gq-fullscreen-9 {text-align: left}
+ p.gq-fullscreen-8 {font-weight: bold; text-align: left}
+ p.gq-fullscreen-7 {font-weight: bold; text-align: center}
+ p.gq-fullscreen-6 {margin-left: 0.79in}
+ p.gq-fullscreen-5 {font-weight: medium}
+ div.gq-fullscreen-4 {text-align: center}
+ table.gq-fullscreen-3 {page-break-before: always}
+ p.gq-fullscreen-2 {text-align: right}
+ p.gq-fullscreen-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr">
+ <div class="gq-fullscreen-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-fullscreen-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="8_1_slideshow.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1">Full Screen – Image Presentation</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-2"><a href="9_printing.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>8.2 Full Screen</h1>
+
+ <p>Geeqie allows for the image pane to be expanded to fill the entire screen, this is referred to as full screen.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Turning on full screen</u>
+ </p>
+
+ <p>Full screen can be activated in a number of ways:</p>
+
+ <ul>
+ <li>
+ <p>From the menu bar - open the <b>View</b> menu and select <b>Full screen</b>.</p>
+ </li>
+
+ <li>
+ <p class="gq-fullscreen-5">From the keyboard - press the <b>F</b> key to toggle full screen.</p>
+ </li>
+
+ <li>
+ <p class="gq-fullscreen-5">From a context menu - right click an image pane, and select <b>Full screen</b>.</p>
+ </li>
+ </ul>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-fullscreen-5"><u>Turning off full screen</u>
+ </p>
+
+ <p class="gq-fullscreen-5">To return to the normal view:</p>
+
+ <ul>
+ <li>
+ <p class="gq-fullscreen-5">From the keyboard - press the <b>F</b> or [<b>Escape</b>] key to stop full screen.</p>
+ </li>
+
+ <li>
+ <p class="gq-fullscreen-5">From a context menu - right click the image pane, and select <b>Exit full screen</b>.</p>
+ </li>
+
+ <li>
+ <p class="gq-fullscreen-5">From the menu bar - the menu bar may be visible when using multiple monitors, open the <b>View</b> menu and select <b>Full screen</b>.</p>
+ </li>
+ </ul>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-fullscreen-5"><u>Configuring full screen</u>
+ </p>
+
+ <p>Full screen behavior and location can be adjusted on the <a href="10_6_advanced.html">Advanced tab</a> of the preferences dialog.</p>
+
+ <p class="gq-fullscreen-6"><b>Size and location</b>: This can be changed using <b>Full screen size</b> option, this can be used to select the monitor to use in a multiple monitor configuration.</p>
+
+ <p class="gq-fullscreen-6"><b>Smooth image flip in full screen</b>: This option delays the image change until the next image is entirely decoded into memory, the result is a smoother transition between images.</p>
+
+ <p class="gq-fullscreen-6"><b>Disable screen saver in full screen</b>: This option will execute <i>xscreensaver-command --deactivate</i> once per minute to avoid the screen saver from activating.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-fullscreen-5"><u>Navigation</u>
+ </p>
+
+ <p class="gq-fullscreen-5">The usual image navigation controls are available when in full screen, these are the commands available:</p>
+
+ <div class="gq-fullscreen-4">
+ <table width="80%" border="1" cellpadding="4" cellspacing="0" rules="ROWS">
+ <colgroup>
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+ </colgroup>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-7">Keyboard</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-7">Mouse</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-8">Description</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">F, V, Escape</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1">Context menu</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-9">Turn off full screen.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-8">Image Navigation</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-9"><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">PageDown</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1">Left Click on image view<br />
+ Mouse Wheel down (*)</p>
+ </td>
+
+ <td width="33%">
+ <p>Change to next image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">PageUp</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1">Middle Click on image view<br />
+ Mouse Wheel up (*)</p>
+ </td>
+
+ <td width="33%">
+ <p>Change to previous image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">Home</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Change to first image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">End</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Change to last image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td colspan="2" width="67%">
+ <p class="gq-fullscreen-9"><b>Image panning</b> (image has keyboard focus)</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-9"><br />
+ </p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1">Left Drag on image view<br />
+ [Shift] + Mouse Wheel (*)</p>
+ </td>
+
+ <td width="33%">
+ <p>Pan image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">[Shift] + Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Pan Image faster.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">[Control] + Arrow Keys</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Pan to respective edge of image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">SpaceBar</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Change to next image.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="33%">
+ <p class="gq-fullscreen-1">Backspace</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p>Change to previous image.</p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p class="gq-fullscreen-6">(*) Default Mouse wheel functions, can be altered by changing <span class="gq-fullscreen-10">the <a href="10_6_advanced.html">Mouse wheel scrolls image</a> option.</span></p>
+
+ <p class="gq-fullscreen-5">Several other standard controls are also available through the keyboard and context menu:</p>
+
+ <div class="gq-fullscreen-4">
+ <table width="80%" border="1" cellpadding="4" cellspacing="0" rules="ROWS" class="gq-fullscreen-3">
+ <col width="128*" />
+ <col width="128*" />
+
+ <tr valign="top">
+ <td width="50%">
+ <p class="gq-fullscreen-11">Function</p>
+ </td>
+
+ <td width="50%">
+ <p class="gq-fullscreen-11">Difference from normal view</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>Copy, Move, Rename</p>
+ </td>
+
+ <td width="50%">
+ <p>same (*)</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>Delete</p>
+ </td>
+
+ <td width="50%">
+ <p>same (*)</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>External edit commands<br />
+ ([Control] + 1 ... 0, context menu)</p>
+ </td>
+
+ <td width="50%">
+ <p>Full screen will turn off prior to activating the function.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>Open image properties window<br />
+ ([Control] + P, context menu)</p>
+ </td>
+
+ <td width="50%">
+ <p>same (*)</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>Image rotation, mirror, and flip</p>
+ </td>
+
+ <td width="50%">
+ <p>same</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>Zoom controls</p>
+ </td>
+
+ <td width="50%">
+ <p>same</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>I</p>
+ </td>
+
+ <td width="50%">
+ <p>Toggle information overlay for full screen: on with histogramm, on without histogramm, off.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>K</p>
+ </td>
+
+ <td width="50%">
+ <p>Switch between the different histogramm modes: RGB, value, maximum value, red channel, green channel, blue channel.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>J</p>
+ </td>
+
+ <td width="50%">
+ <p>Toogle between linear and logarithmical histogramm.</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>Slide show controls<br />
+ (S, P, context menu)</p>
+ </td>
+
+ <td width="50%">
+ <p>same</p>
+ </td>
+ </tr>
+
+ <tr valign="top">
+ <td width="50%">
+ <p>Quit with [Control] + Q</p>
+ </td>
+
+ <td width="50%">
+ <p>same</p>
+ </td>
+ </tr>
+ </table>
+ </div>
+
+ <p class="gq-fullscreen-6">(*) Releases prior to 1.5.3 will turn off full screen prior to activating the function.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-fullscreen-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="8_1_slideshow.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-2"><a href="9_printing.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-fullscreen-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-fullscreen-12"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Chapter - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040915;10255600">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="7_3_keywords.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Image Presentation</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="8_1_slideshow.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>8. Image Presentation</H1>
-<P>Geeqie can be used to display a set of images, showing each image
-for a period of time before changing to the next image. Images can
-also be set to fill the entire screen.</P>
-<P STYLE="margin-left: 0.79in">8.1 <A HREF="8_1_slideshow.html">Slide
-show</A></P>
-<P STYLE="margin-left: 0.79in">8.2 <A HREF="8_2_fullscreen.html">Full
-screen</A></P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="7_3_keywords.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="8_1_slideshow.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Chapter - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040915;10255600" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-image-presentation-6 {margin-bottom: 0in}
+ p.gq-image-presentation-5 {margin-left: 0.79in}
+ div.gq-image-presentation-4 {text-align: center}
+ table.gq-image-presentation-3 {page-break-before: always}
+ p.gq-image-presentation-2 {text-align: right}
+ p.gq-image-presentation-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-image-presentation-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-image-presentation-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="7_3_keywords.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-presentation-1">Image Presentation</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-presentation-2"><a href="8_1_slideshow.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>8. Image Presentation</h1>
+
+ <p>Geeqie can be used to display a set of images, showing each image for a period of time before changing to the next image. Images can also be set to fill the entire screen.</p>
+
+ <p class="gq-image-presentation-5">8.1 <a href="8_1_slideshow.html">Slide show</a></p>
+
+ <p class="gq-image-presentation-5">8.2 <a href="8_2_fullscreen.html">Full screen</a></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-image-presentation-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="7_3_keywords.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-presentation-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-presentation-2"><a href="8_1_slideshow.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-presentation-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-image-presentation-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-image-presentation-6"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Printing - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20050208;14364600">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="8_2_fullscreen.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Printing</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_options.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>9. Printing</H1>
-<P>To print an image press Shift + P or select Print from the File
-menu.</P>
-<P>The print dialog includes tabs that group related printing
-options, a preview pane, and a Print and Cancel button.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Layout tab</U></P>
-<P STYLE="margin-left: 0.79in"><B>Source:</B> This selects the group
-of images to use for print output.</P>
-<P STYLE="margin-left: 1.58in"><B>Image:</B> The file with the
-focus.<BR><B>Selection:</B> The files selected in the main
-window.<BR><B>All:</B> All files listed in the main window.</P>
-<P STYLE="margin-left: 0.79in"><B>Layout:</B> Select one image per
-page, or a Proof sheet that will print multiple images per page.</P>
-<P STYLE="margin-left: 1.58in"><B>Image size:</B> When print one
-image per page, the size of the image in relation to the available
-print area.<BR><B>Proof size:</B> When printing a Proof sheet, the
-size of each image in Units (see Paper tab).</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Text tab</U></P>
-<P STYLE="margin-left: 0.79in"><B>Name:</B> Include the file name
-below each image.</P>
-<P STYLE="margin-left: 0.79in"><B>Date:</B> Include the file date
-below each image.</P>
-<P STYLE="margin-left: 0.79in"><B>Size:</B> Include the file size
-below each image.</P>
-<P STYLE="margin-left: 0.79in"><B>Dimensions:</B> Include the source
-image's pixel width and height below each image.</P>
-<P STYLE="margin-left: 0.79in"><B>Font size:</B> The font size to use
-for the text description of each image, in points.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Paper tab</U></P>
-<P STYLE="margin-left: 0.79in"><B>Format:</B> The size of the paper
-in the printer's paper tray. Many common sizes are provided, however
-if the paper size is not listed selected the Custom format and enter
-the paper size in Size below.</P>
-<P STYLE="margin-left: 0.79in"><B>Size:</B> The size of the selected
-paper format, in Units (below). These numbers can be changed when the
-paper Format is Custom.</P>
-<P STYLE="margin-left: 0.79in"><B>Units:</B> Select the units for
-Geeqie to use when conveying measurements of length for paper size,
-margins, and images sizes to the user.</P>
-<P STYLE="margin-left: 0.79in"><B>Orientation:</B> Select portrait or
-landscape print output.</P>
-<P STYLE="margin-left: 0.79in"><B><SPAN STYLE="text-decoration: none">Margins</SPAN>:</B>
-These values specify the size of the paper edges not to be included
-in the print region, in Units (above).</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Printer tab</U></P>
-<P STYLE="margin-left: 0.79in; text-decoration: none"><B>Destination:</B>
-Use this to select the destination of the print output.</P>
-<P STYLE="margin-left: 1.58in; text-decoration: none">Default
-printer: Prints to the system default printer.<BR>Custom printer:
-Prints to the printer using the command defined in Custom printer
-(below).<BR>Postscript file: Writes using the postscript format to
-named File (below).<BR>Image file: Writes using the selected File
-format (below) to named File (below).</P>
-<P STYLE="margin-left: 0.79in"><SPAN STYLE="text-decoration: none"><B>Custom
-printer:</B></SPAN> The command to use when Destination is selected
-as Custom printer. For convenience, the drop down list includes
-printers available for use by the printing subsystem.</P>
-<P STYLE="margin-left: 0.79in"><SPAN STYLE="text-decoration: none"><B>File:</B></SPAN>
-The file to use for output when Destination is Postscript file or
-Image file.</P>
-<P STYLE="margin-left: 0.79in; text-decoration: none"><B>File format:</B>
-The image format to use when Destination is Image file.</P>
-<P STYLE="margin-left: 0.79in"><SPAN STYLE="text-decoration: none"><B>DPI:</B>
-Abbreviation for Dots Per Inch. When the Destination is a printer or
-postscript file, this defines the maximum DPI to use when outputting
-image data.</SPAN> For example if the Destination printer is only
-capable of 600 DPI, but the resulting image to print is 1200 DPI,
-Geeqie will scale the image down to 600 DPI before sending it to the
-printer. This can greatly reduce the size of a print job when
-printing Proof Sheets or very large images.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Preview</U></P>
-<P STYLE="margin-left: 0.79in">The preview displays a small version
-of the output that will result with the current settings. The preview
-will update whenever a setting is changed that will effect the print
-output.</P>
-<P STYLE="margin-left: 0.79in">The preview will indicate the number
-of pages that will be printed, to see a preview of a specific page
-change to that page by activating the left or right arrow buttons
-located below the preview.</P>
-<P STYLE="margin-left: 0.79in">The size of the preview can be changed
-using the three zoom buttons located below the preview.</P>
-<P STYLE="margin-left: 0.79in">The preview includes several reference
-lines that are <I>not included</I> in the final print:</P>
-<P STYLE="margin-left: 1.58in"><B>Reference grid:</B> Light gray
-lines that form a grid over the entire page, the spacing between
-these lines is dependent on the current measurement unit:</P>
-<P STYLE="margin-left: 2.36in">Inch: 1 inch.<BR>Points: 72
-points.<BR>Centimeters or Millimeters: 1 centimeter.</P>
-<P STYLE="margin-left: 1.58in"><B>Margins:</B> Blue lines along each
-edge of the page represent the location of the print margins, the
-non-printable area of the page is also gray.</P>
-<P STYLE="margin-left: 1.58in"><B>Proof sheet grid:</B> When the
-layout is set to Proof sheet, each proof location is indicated with a
-red rectangle.</P>
-<P><BR><BR>
-</P>
-<P><U>Remember print settings</U></P>
-<P STYLE="margin-left: 0.79in">Enable this check box to retain the
-current settings as the default for the print dialog. This option
-only retains the settings when a print operation is started by
-activating the print button. In addition, only the settings relevant
-to the current print operation will be retained.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Print button</U></P>
-<P STYLE="margin-left: 0.79in">Activate the print button to start the
-print job, the dialog will change to display the progress as images
-are sent to the selected print destination.</P>
-<P><BR><BR>
-</P>
-<P STYLE="font-weight: medium"><U>Cancel button</U></P>
-<P STYLE="margin-left: 0.79in">Activate this button to close the
-print dialog, no printing will be performed.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="8_2_fullscreen.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="10_options.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Printing - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20050208;14364600" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-printing-12 {margin-bottom: 0in}
+ p.gq-printing-11 {margin-left: 2.36in}
+ p.gq-printing-10 {margin-left: 1.58in; text-decoration: none}
+ p.gq-printing-9 {margin-left: 0.79in; text-decoration: none}
+ span.gq-printing-8 {text-decoration: none}
+ p.gq-printing-7 {margin-left: 1.58in}
+ p.gq-printing-6 {margin-left: 0.79in}
+ p.gq-printing-5 {font-weight: medium}
+ div.gq-printing-4 {text-align: center}
+ table.gq-printing-3 {page-break-before: always}
+ p.gq-printing-2 {text-align: right}
+ p.gq-printing-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-printing-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-printing-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="8_2_fullscreen.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-printing-1">Printing</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-printing-2"><a href="10_options.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>9. Printing</h1>
+
+ <p>To print an image press Shift + P or select Print from the File menu.</p>
+
+ <p>The print dialog includes tabs that group related printing options, a preview pane, and a Print and Cancel button.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-printing-5"><u>Layout tab</u>
+ </p>
+
+ <p class="gq-printing-6"><b>Source:</b> This selects the group of images to use for print output.</p>
+
+ <p class="gq-printing-7"><b>Image:</b> The file with the focus.<br />
+ <b>Selection:</b> The files selected in the main window.<br />
+ <b>All:</b> All files listed in the main window.</p>
+
+ <p class="gq-printing-6"><b>Layout:</b> Select one image per page, or a Proof sheet that will print multiple images per page.</p>
+
+ <p class="gq-printing-7"><b>Image size:</b> When print one image per page, the size of the image in relation to the available print area.<br />
+ <b>Proof size:</b> When printing a Proof sheet, the size of each image in Units (see Paper tab).</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-printing-5"><u>Text tab</u>
+ </p>
+
+ <p class="gq-printing-6"><b>Name:</b> Include the file name below each image.</p>
+
+ <p class="gq-printing-6"><b>Date:</b> Include the file date below each image.</p>
+
+ <p class="gq-printing-6"><b>Size:</b> Include the file size below each image.</p>
+
+ <p class="gq-printing-6"><b>Dimensions:</b> Include the source image's pixel width and height below each image.</p>
+
+ <p class="gq-printing-6"><b>Font size:</b> The font size to use for the text description of each image, in points.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-printing-5"><u>Paper tab</u>
+ </p>
+
+ <p class="gq-printing-6"><b>Format:</b> The size of the paper in the printer's paper tray. Many common sizes are provided, however if the paper size is not listed selected the Custom format and enter the paper size in Size below.</p>
+
+ <p class="gq-printing-6"><b>Size:</b> The size of the selected paper format, in Units (below). These numbers can be changed when the paper Format is Custom.</p>
+
+ <p class="gq-printing-6"><b>Units:</b> Select the units for Geeqie to use when conveying measurements of length for paper size, margins, and images sizes to the user.</p>
+
+ <p class="gq-printing-6"><b>Orientation:</b> Select portrait or landscape print output.</p>
+
+ <p class="gq-printing-6"><b><span class="gq-printing-8">Margins</span>:</b> These values specify the size of the paper edges not to be included in the print region, in Units (above).</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-printing-5"><u>Printer tab</u>
+ </p>
+
+ <p class="gq-printing-9"><b>Destination:</b> Use this to select the destination of the print output.</p>
+
+ <p class="gq-printing-10">Default printer: Prints to the system default printer.<br />
+ Custom printer: Prints to the printer using the command defined in Custom printer (below).<br />
+ Postscript file: Writes using the postscript format to named File (below).<br />
+ Image file: Writes using the selected File format (below) to named File (below).</p>
+
+ <p class="gq-printing-6"><span class="gq-printing-8"><b>Custom printer:</b></span> The command to use when Destination is selected as Custom printer. For convenience, the drop down list includes printers available for use by the printing subsystem.</p>
+
+ <p class="gq-printing-6"><span class="gq-printing-8"><b>File:</b></span> The file to use for output when Destination is Postscript file or Image file.</p>
+
+ <p class="gq-printing-9"><b>File format:</b> The image format to use when Destination is Image file.</p>
+
+ <p class="gq-printing-6"><span class="gq-printing-8"><b>DPI:</b> Abbreviation for Dots Per Inch. When the Destination is a printer or postscript file, this defines the maximum DPI to use when outputting image data.</span> For example if the Destination printer is only capable of 600 DPI, but the resulting image to print is 1200 DPI, Geeqie will scale the image down to 600 DPI before sending it to the printer. This can greatly reduce the size of a print job when printing Proof Sheets or very large images.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-printing-5"><u>Preview</u>
+ </p>
+
+ <p class="gq-printing-6">The preview displays a small version of the output that will result with the current settings. The preview will update whenever a setting is changed that will effect the print output.</p>
+
+ <p class="gq-printing-6">The preview will indicate the number of pages that will be printed, to see a preview of a specific page change to that page by activating the left or right arrow buttons located below the preview.</p>
+
+ <p class="gq-printing-6">The size of the preview can be changed using the three zoom buttons located below the preview.</p>
+
+ <p class="gq-printing-6">The preview includes several reference lines that are <i>not included</i> in the final print:</p>
+
+ <p class="gq-printing-7"><b>Reference grid:</b> Light gray lines that form a grid over the entire page, the spacing between these lines is dependent on the current measurement unit:</p>
+
+ <p class="gq-printing-11">Inch: 1 inch.<br />
+ Points: 72 points.<br />
+ Centimeters or Millimeters: 1 centimeter.</p>
+
+ <p class="gq-printing-7"><b>Margins:</b> Blue lines along each edge of the page represent the location of the print margins, the non-printable area of the page is also gray.</p>
+
+ <p class="gq-printing-7"><b>Proof sheet grid:</b> When the layout is set to Proof sheet, each proof location is indicated with a red rectangle.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><u>Remember print settings</u>
+ </p>
+
+ <p class="gq-printing-6">Enable this check box to retain the current settings as the default for the print dialog. This option only retains the settings when a print operation is started by activating the print button. In addition, only the settings relevant to the current print operation will be retained.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-printing-5"><u>Print button</u>
+ </p>
+
+ <p class="gq-printing-6">Activate the print button to start the print job, the dialog will change to display the progress as images are sent to the selected print destination.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-printing-5"><u>Cancel button</u>
+ </p>
+
+ <p class="gq-printing-6">Activate this button to close the print dialog, no printing will be performed.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-printing-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="8_2_fullscreen.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-printing-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-printing-2"><a href="10_options.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-printing-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-printing-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-printing-12"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Chapter - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040917;13584000">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="index.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Frequently Asked Questions</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="1_introduction.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<H1>Frequently Asked Questions</H1>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>1.
-Image viewing</FONT></FONT></P>
-<P><B>1.1 How do I keep images smaller than the visible area from
-enlarging when the zoom is set to “fit to window” ?</B></P>
-<P STYLE="margin-left: 0.79in">In the preferences dialog, under the
-“Image” tab, disable “Allow enlargement of image
-for zoom to fit”.</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>9.
-Command line</FONT></FONT></P>
-<P><B>9.1 How do I open an image in an existing Geeqie application ?</B></P>
-<P STYLE="margin-left: 0.79in">Use the “-r” command line
-option to send commands to an existing Geeqie, for a list of commands
-supported by the remote switch run:</P>
-<PRE STYLE="margin-left: 1.58in">geeqie --remote-help</PRE><P>
-<BR><BR>
-</P>
-<P><B>9.2 How do I set the slide show delay when starting Geeqie in
-slide show from the command line ?</B></P>
-<P STYLE="margin-left: 0.79in">The delay can not be set when used
-with the standard -s command line switch, as -s uses the delay stored
-in the configuration file. For this use the remote command -ss to
-start the slide show after setting the delay with -d, the order of
-the command line is important, for example a 12 second slide show
-delay:</P>
-<PRE STYLE="margin-left: 1.58in">geeqie -r -d12 -ss</PRE><P STYLE="margin-left: 0.79in">
-<BR><BR>
-</P>
-<P STYLE="margin-left: 0.79in">Note that if geeqie is running prior
-to this command, the slide show should also be stopped prior to
-changing the delay:</P>
-<PRE STYLE="margin-left: 1.58in">geeqie -r -sS -d12 -ss</PRE><P>
-<BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P STYLE="margin-top: 0.17in; page-break-after: avoid"><FONT FACE="Albany, sans-serif"><FONT SIZE=4>10.
-Miscellaneous</FONT></FONT></P>
-<P><B>10.1 I want to be able to edit images with Geeqie</B></P>
-<P STYLE="margin-left: 0.79in">Geeqie is an image <I>viewer</I>.
-There is, and never will be, a plan to add editing features. I
-recommend gimp for image editing.</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="index.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="introduction.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Chapter - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040917;13584000" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-faq-10 {margin-bottom: 0in}
+ pre.gq-faq-9 {margin-left: 1.58in}
+ p.gq-faq-8 {margin-left: 0.79in}
+ p.gq-faq-7 {font-weight: bold}
+ p.gq-faq-6 {font-family: Albany, sans-serif; margin-top: 0.17in; page-break-after: avoid}
+ span.gq-faq-5 {font-size: 120%}
+ div.gq-faq-4 {text-align: center}
+ table.gq-faq-3 {page-break-before: always}
+ p.gq-faq-2 {text-align: right}
+ p.gq-faq-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-faq-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-faq-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="index.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-faq-1">Frequently Asked Questions</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-faq-2"><a href="1_introduction.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <h1>Frequently Asked Questions</h1>
+
+ <p class="gq-faq-6"><span class="gq-faq-5">1. Image viewing</span>
+ </p>
+
+ <p class="gq-faq-7">1.1 How do I keep images smaller than the visible area from enlarging when the zoom is set to “fit to window” ?</p>
+
+ <p class="gq-faq-8">In the preferences dialog, under the “Image” tab, disable “Allow enlargement of image for zoom to fit”.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-faq-6"><span class="gq-faq-5">9. Command line</span>
+ </p>
+
+ <p class="gq-faq-7">9.1 How do I open an image in an existing Geeqie application ?</p>
+
+ <p class="gq-faq-8">Use the “-r” command line option to send commands to an existing Geeqie, for a list of commands supported by the remote switch run:</p>
+
+ <pre class="gq-faq-9">
+geeqie --remote-help
+</pre>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-faq-7">9.2 How do I set the slide show delay when starting Geeqie in slide show from the command line ?</p>
+
+ <p class="gq-faq-8">The delay can not be set when used with the standard -s command line switch, as -s uses the delay stored in the configuration file. For this use the remote command -ss to start the slide show after setting the delay with -d, the order of the command line is important, for example a 12 second slide show delay:</p>
+
+ <pre class="gq-faq-9">
+geeqie -r -d12 -ss
+</pre>
+
+ <p class="gq-faq-8"><br />
+ <br />
+ </p>
+
+ <p class="gq-faq-8">Note that if geeqie is running prior to this command, the slide show should also be stopped prior to changing the delay:</p>
+
+ <pre class="gq-faq-9">
+geeqie -r -sS -d12 -ss
+</pre>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p class="gq-faq-6"><span class="gq-faq-5">10. Miscellaneous</span>
+ </p>
+
+ <p class="gq-faq-7">10.1 I want to be able to edit images with Geeqie</p>
+
+ <p class="gq-faq-8">Geeqie is an image <i>viewer</i>. There is, and never will be, a plan to add editing features. I recommend gimp for image editing.</p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-faq-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="index.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-faq-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-faq-2"><a href="introduction.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-faq-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-faq-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-faq-10"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Contents - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23044800">
- <META NAME="CHANGED" CONTENT="20050131;9410800">
- <STYLE>
- <!--
- @page { size: 8.27in 11.69in; margin: 0.79in }
- -->
- </STYLE>
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Contents</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="1_introduction.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<P><B>The Geeqie User Manual.</B></P>
-<P STYLE="margin-left: 0.79in">If you are having trouble finding a
-solution in the manual, try looking in the <A HREF="faq.html">FAQ</A>.</P>
-<P>1. <A HREF="1_introduction.html">Introduction</A></P>
-<P>2. <A HREF="2_main_window.html">Main Window</A></P>
-<P STYLE="margin-left: 0.79in">2.1 <A HREF="2_1_navigation.html">Navigation</A></P>
-<P STYLE="margin-left: 0.79in">2.2 <A HREF="2_2_menus.html">Menus</A></P>
-<P STYLE="margin-left: 0.79in">2.3 <A HREF="2_3_layout.html">Layout</A></P>
-<P STYLE="margin-left: 0.79in">2.4 <A HREF="2_4_file_pane.html">File
-Pane</A></P>
-<P STYLE="margin-left: 0.79in">2.5 <A HREF="2_5_folder_pane.html">Folder
-Pane</A></P>
-<P STYLE="margin-left: 0.79in">2.6 <A HREF="2_6_image_pane.html">Image
-Pane</A></P>
-<P STYLE="margin-left: 0.79in">2.7 <A HREF="2_7_status_bar.html">Status
-Bar</A></P>
-<P>3. <A HREF="3_other_windows.html">Other Windows</A></P>
-<P STYLE="margin-left: 0.79in">3.1 <A HREF="3_1_image_window.html">Image
-Window</A></P>
-<P STYLE="margin-left: 0.79in">3.2 <A HREF="3_2_image_properties.html">Image
-Properties</A> Window</P>
-<P>4. <A HREF="4_image_management.html">Image Management</A></P>
-<P STYLE="margin-left: 0.79in">4.1 <A HREF="4_1_copy_move.html">Copy
-and Move</A></P>
-<P STYLE="margin-left: 0.79in">4.2 <A HREF="4_2_rename.html">Rename</A></P>
-<P STYLE="margin-left: 0.79in">4.3 <A HREF="4_3_delete.html">Delete</A></P>
-<P STYLE="margin-left: 0.79in">4.4 <A HREF="4_4_external_editing.html">External
-Editing</A> Commands</P>
-<P>5. <A HREF="5_image_search.html">Image Search</A></P>
-<P STYLE="margin-left: 0.79in">5.1 <A HREF="5_1_search.html">Search
-Window</A></P>
-<P STYLE="margin-left: 0.79in">5.2 <A HREF="5_2_finding_duplicates.html">Finding
-Duplicate</A> Images</P>
-<P>6. <A HREF="6_collections.html">Collections</A></P>
-<P>7. <A HREF="7_sidebars.html">Sidebars</A></P>
-<P STYLE="margin-left: 0.79in">7.1 <A HREF="7_1_exif.html">EXIF</A></P>
-<P STYLE="margin-left: 0.79in">7.2 <A HREF="7_2_sort_manager.html">Sort
-Manager</A></P>
-<P STYLE="margin-left: 0.79in">7.3 <A HREF="7_3_keywords.html">Keywords</A></P>
-<P>8. <A HREF="8_image_presentation.html">Image Presentation</A></P>
-<P STYLE="margin-left: 0.79in">8.1 <A HREF="8_1_slideshow.html">Slide
-show</A></P>
-<P STYLE="margin-left: 0.79in">8.2 <A HREF="8_2_fullscreen.html">Full
-screen</A></P>
-<P>9. <A HREF="9_printing.html">Printing</A></P>
-<P>10. <A HREF="10_options.html">Options</A> Explained</P>
-<P STYLE="margin-left: 0.79in">10.1 <A HREF="10_1_general.html">General
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.2 <A HREF="10_2_image.html">Image
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.3 <A HREF="10_3_window.html">Window
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.4 <A HREF="10_4_filtering.html">Filtering
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.5 <A HREF="10_5_editor_commands.html">Editor
-Commands</A></P>
-<P STYLE="margin-left: 0.79in">10.6 <A HREF="10_6_advanced.html">Advanced
-Options</A></P>
-<P STYLE="margin-left: 0.79in">10.7 <A HREF="10_7_hidden.html">Hidden
-Options</A></P>
-<P>11. <A HREF="11_reference.html">Reference</A></P>
-<P STYLE="margin-left: 0.79in">11.1 <A HREF="11_1_command_line.html">Command
-Line</A> Options</P>
-<P STYLE="margin-left: 0.79in">11.2 <A HREF="11_2_keyboard_shortcuts.html">Keyboard
-Shortcuts</A></P>
-<P STYLE="margin-left: 0.79in">11.3 <A HREF="11_3_thumbnails.html">Thumbnails</A></P>
-<P STYLE="margin-left: 0.79in">11.4 <A HREF="11_4_management.html">Cache
-and Data Management</A></P>
-<P>12. <A HREF="12_credits.html">Credits</A></P>
-<P>13. <A HREF="gnu_fdl.txt">GNU Free Documentation License</A></P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="1_introduction.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Contents - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23044800" />
+ <meta name="CHANGED" content="20050131;9410800" />
+<style type="text/css">
+/*<![CDATA[*/
+ <!--
+ @page { size: 8.27in 11.69in; margin: 0.79in }
+ -->
+/*]]>*/
+</style>
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-index-7 {margin-bottom: 0in}
+ p.gq-index-6 {margin-left: 0.79in}
+ p.gq-index-5 {font-weight: bold}
+ div.gq-index-4 {text-align: center}
+ table.gq-index-3 {page-break-before: always}
+ p.gq-index-2 {text-align: right}
+ p.gq-index-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-index-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-index-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-index-1">Contents</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-index-2"><a href="1_introduction.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <p class="gq-index-5">The Geeqie User Manual.</p>
+
+ <p class="gq-index-6">If you are having trouble finding a solution in the manual, try looking in the <a href="faq.html">FAQ</a>.</p>
+
+ <p>1. <a href="1_introduction.html">Introduction</a></p>
+
+ <p>2. <a href="2_main_window.html">Main Window</a></p>
+
+ <p class="gq-index-6">2.1 <a href="2_1_navigation.html">Navigation</a></p>
+
+ <p class="gq-index-6">2.2 <a href="2_2_menus.html">Menus</a></p>
+
+ <p class="gq-index-6">2.3 <a href="2_3_layout.html">Layout</a></p>
+
+ <p class="gq-index-6">2.4 <a href="2_4_file_pane.html">File Pane</a></p>
+
+ <p class="gq-index-6">2.5 <a href="2_5_folder_pane.html">Folder Pane</a></p>
+
+ <p class="gq-index-6">2.6 <a href="2_6_image_pane.html">Image Pane</a></p>
+
+ <p class="gq-index-6">2.7 <a href="2_7_status_bar.html">Status Bar</a></p>
+
+ <p>3. <a href="3_other_windows.html">Other Windows</a></p>
+
+ <p class="gq-index-6">3.1 <a href="3_1_image_window.html">Image Window</a></p>
+
+ <p class="gq-index-6">3.2 <a href="3_2_image_properties.html">Image Properties</a> Window</p>
+
+ <p>4. <a href="4_image_management.html">Image Management</a></p>
+
+ <p class="gq-index-6">4.1 <a href="4_1_copy_move.html">Copy and Move</a></p>
+
+ <p class="gq-index-6">4.2 <a href="4_2_rename.html">Rename</a></p>
+
+ <p class="gq-index-6">4.3 <a href="4_3_delete.html">Delete</a></p>
+
+ <p class="gq-index-6">4.4 <a href="4_4_external_editing.html">External Editing</a> Commands</p>
+
+ <p>5. <a href="5_image_search.html">Image Search</a></p>
+
+ <p class="gq-index-6">5.1 <a href="5_1_search.html">Search Window</a></p>
+
+ <p class="gq-index-6">5.2 <a href="5_2_finding_duplicates.html">Finding Duplicate</a> Images</p>
+
+ <p>6. <a href="6_collections.html">Collections</a></p>
+
+ <p>7. <a href="7_sidebars.html">Sidebars</a></p>
+
+ <p class="gq-index-6">7.1 <a href="7_1_exif.html">EXIF</a></p>
+
+ <p class="gq-index-6">7.2 <a href="7_2_sort_manager.html">Sort Manager</a></p>
+
+ <p class="gq-index-6">7.3 <a href="7_3_keywords.html">Keywords</a></p>
+
+ <p>8. <a href="8_image_presentation.html">Image Presentation</a></p>
+
+ <p class="gq-index-6">8.1 <a href="8_1_slideshow.html">Slide show</a></p>
+
+ <p class="gq-index-6">8.2 <a href="8_2_fullscreen.html">Full screen</a></p>
+
+ <p>9. <a href="9_printing.html">Printing</a></p>
+
+ <p>10. <a href="10_options.html">Options</a> Explained</p>
+
+ <p class="gq-index-6">10.1 <a href="10_1_general.html">General Options</a></p>
+
+ <p class="gq-index-6">10.2 <a href="10_2_image.html">Image Options</a></p>
+
+ <p class="gq-index-6">10.3 <a href="10_3_window.html">Window Options</a></p>
+
+ <p class="gq-index-6">10.4 <a href="10_4_filtering.html">Filtering Options</a></p>
+
+ <p class="gq-index-6">10.5 <a href="10_5_editor_commands.html">Editor Commands</a></p>
+
+ <p class="gq-index-6">10.6 <a href="10_6_advanced.html">Advanced Options</a></p>
+
+ <p class="gq-index-6">10.7 <a href="10_7_hidden.html">Hidden Options</a></p>
+
+ <p>11. <a href="11_reference.html">Reference</a></p>
+
+ <p class="gq-index-6">11.1 <a href="11_1_command_line.html">Command Line</a> Options</p>
+
+ <p class="gq-index-6">11.2 <a href="11_2_keyboard_shortcuts.html">Keyboard Shortcuts</a></p>
+
+ <p class="gq-index-6">11.3 <a href="11_3_thumbnails.html">Thumbnails</a></p>
+
+ <p class="gq-index-6">11.4 <a href="11_4_management.html">Cache and Data Management</a></p>
+
+ <p>12. <a href="12_credits.html">Credits</a></p>
+
+ <p>13. <a href="gnu_fdl.txt">GNU Free Documentation License</a></p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-index-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-index-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-index-2"><a href="1_introduction.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-index-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-index-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-index-7"><br />
+ </p>
+</body>
+</html>
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<HTML>
-<HEAD>
- <META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
- <TITLE>Chapter - Geeqie User Manual</TITLE>
- <META NAME="CREATED" CONTENT="20040805;23590500">
- <META NAME="CHANGED" CONTENT="20040806;462900">
-</HEAD>
-<BODY LANG="en-US" DIR="LTR">
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0 STYLE="page-break-before: always">
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="previous.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER>Chapter - Subchapter</P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="next.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- </TABLE>
-</CENTER>
-<HR>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<P><BR><BR>
-</P>
-<HR>
-<CENTER>
- <TABLE WIDTH=100% BORDER=0 CELLPADDING=4 CELLSPACING=0>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <COL WIDTH=85*>
- <THEAD>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><A HREF="previous.html">Previous</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><A HREF="index.html">Contents</A></P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT><A HREF="next.html">Next</A></P>
- </TD>
- </TR>
- </THEAD>
- <TBODY>
- <TR VALIGN=TOP>
- <TD WIDTH=33%>
- <P><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=CENTER><BR>
- </P>
- </TD>
- <TD WIDTH=33%>
- <P ALIGN=RIGHT>Geeqie User Manual</P>
- </TD>
- </TR>
- </TBODY>
- </TABLE>
-</CENTER>
-<P STYLE="margin-bottom: 0in"><BR>
-</P>
-</BODY>
-</HTML>
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+ <meta http-equiv="CONTENT-TYPE" content="text/html; charset=iso-8859-1" />
+
+ <title>Chapter - Geeqie User Manual</title>
+ <meta name="CREATED" content="20040805;23590500" />
+ <meta name="CHANGED" content="20040806;462900" />
+<style type="text/css">
+/*<![CDATA[*/
+ p.gq-template-5 {margin-bottom: 0in}
+ div.gq-template-4 {text-align: center}
+ table.gq-template-3 {page-break-before: always}
+ p.gq-template-2 {text-align: right}
+ p.gq-template-1 {text-align: center}
+/*]]>*/
+</style>
+</head>
+
+<body lang="en-US" dir="ltr" xml:lang="en-US">
+ <div class="gq-template-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0" class="gq-template-3">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="previous.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-template-1">Chapter - Subchapter</p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-template-2"><a href="next.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+ </table>
+ </div>
+
+ <hr />
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <p><br />
+ <br />
+ </p>
+
+ <hr />
+
+ <div class="gq-template-4">
+ <table width="100%" border="0" cellpadding="4" cellspacing="0">
+ <col width="85*" />
+ <col width="85*" />
+ <col width="85*" />
+
+ <thead>
+ <tr valign="top">
+ <td width="33%">
+ <p><a href="previous.html">Previous</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-template-1"><a href="index.html">Contents</a>
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-template-2"><a href="next.html">Next</a>
+ </p>
+ </td>
+ </tr>
+ </thead>
+
+ <tbody>
+ <tr valign="top">
+ <td width="33%">
+ <p><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-template-1"><br />
+ </p>
+ </td>
+
+ <td width="33%">
+ <p class="gq-template-2">Geeqie User Manual</p>
+ </td>
+ </tr>
+ </tbody>
+ </table>
+ </div>
+
+ <p class="gq-template-5"><br />
+ </p>
+</body>
+</html>
projects / geeqie.git / commitdiff